Thread Tools
Jul 25, 2012, 09:10 PM
Registered User
jojoen's Avatar
Here is how I do it to make sure my neutral is ok for each launch. The only reason for it is that we have seen some servo brands change neutral on various reasons. Tx potmeter might get bad or even a mistake in programing from the user (maybe the most common...)

Regards Jojo
Sign up now
to remove ads between posts
Jul 27, 2012, 12:32 AM
Team JR Air
tewatson's Avatar
So, do all the variants of the Perfection use an all-carbon fuse?

Tom
Jul 27, 2012, 02:03 AM
Registered User
Tuomo's Avatar
Quote:
Originally Posted by tewatson
So, do all the variants of the Perfection use an all-carbon fuse?

Tom
I think it comes with 2.4 nose.
Jul 27, 2012, 07:18 AM
Registered User
Tom,

My SL ST40 came with a 2.4 friendly nose section.

See Ya,


Pat
Jul 27, 2012, 12:40 PM
Registered User
jojoen's Avatar
All is made of HM carbon with glass/kevlar nose.
Jul 27, 2012, 01:34 PM
Registered User
Fuselages are very and stiff strong like F3b. They are also quite light. The quality is excellent. Attention to detail around the tail area - especially the way the fin and rudder locate onto the fuselage - is exceptional.
Last edited by Neil Jones; Jul 27, 2012 at 01:46 PM. Reason: attach a picture
Aug 10, 2012, 05:09 PM
Registered User
Perfection second in WC today!
Aug 10, 2012, 10:55 PM
Bro
Bro
Registered User
Bro's Avatar

Perfection


Hi,
Yes the Perfection did very well at the WC! Even in tough conditions it showed that Samba still is making a TOP model for F3J/TD! (Are you surprised?)

Oh, did I forget to say we have them in stock?

Best,
Bob
Latest blog entry: 2015
Aug 11, 2012, 01:39 AM
Registered User
jojoen's Avatar
And first in juniors!
Aug 11, 2012, 01:46 AM
Registered User
Tuomo's Avatar
ST80 lamination was enough for winds in WC?
Aug 12, 2012, 11:30 AM
kdt
kdt
Registered User
kdt's Avatar

ST 80 is Excellent in the wind.


Quote:
Originally Posted by Tuomo
ST80 lamination was enough for winds in WC?
ST80 was my primary in the WC and it carried a full load of ballast for most rounds. Excellent launch and great legs. Never had any question with the strength. Only wish I had more time to set the model up before the WC. One week was not enough. Landing accuracy was an issue for me as a result of a poor landing setup.


No problem recommending the Perfection. Samba have built a keeper...
Aug 12, 2012, 12:00 PM
kdt
kdt
Registered User
kdt's Avatar

SL light joiner


A note for SL owners to inspect the light wing joiner (75 gram) closely.

I have always made it a point to to inspect my wing joiners carefully before and after each use and take extra care with light models.

It is my recommendation to use the (heavy 100 gram joiner) with the SL instead of the (light 75 gram joiner) for 2 man tow even in no wind.
Last edited by kdt; Aug 13, 2012 at 12:25 AM.
Aug 14, 2012, 08:38 AM
Slope addict User
tiju000's Avatar
Is this servo choice any good for the plane.

Airtronics 809 ( ailerons)
Airtronics 761 ( for the rest)

I would appreciate some comment of people using them and how they handle the task with time ?

I saw that most people go the MKS way ( new kids on the block).

Thanks
Thierry
Aug 14, 2012, 09:14 AM
Registered User
J. Wydronek's Avatar
You could even run an 809 on the rudder
Aug 14, 2012, 10:32 AM
Registered User

Servo Choice


Thierry

I sure hope those work, that is the combo I use on most of my planes and never have an issue. As for the power of the 809's you could probably get away with using them on both elevator and rudder but why go with a lighter less powerful servo and then have to just add more lead anyway? The Airtronics servos are very fine servos so you will not be unhappy with them in your Perfection.

See Ya,

Pat

Quote:
Originally Posted by tiju000
Is this servo choice any good for the plane.

Airtronics 809 ( ailerons)
Airtronics 761 ( for the rest)

I would appreciate some comment of people using them and how they handle the task with time ?

I saw that most people go the MKS way ( new kids on the block).

Thanks
Thierry


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold T-Rex 550FBL 3GX V2 "PERFECTION" (SOLD) rapyd Aircraft - Electric - Helis (FS/W) 7 Jul 25, 2011 06:44 AM
Wanted Pike, Pike Plus, Pike P or Pike WR Wing Center Section Lancer263 Aircraft - Sailplanes (FS/W) 0 Nov 11, 2010 11:07 PM