Help Fixing DH 9101 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Jan 14, 2012, 04:34 PM

Help Fixing DH 9101

I am new to RC...have a Shuang Ma DH 9101 Heli. Would not move forward but saw a tip about modeling clay in the nose to fix this. Thanks!! But had a "hard landing" (crash maybe????) and broke the Main Blade Grip. Any suggestions on suppliers in the US to get parts? Also...seems I have to remove the Balance Bar to replace the grip. Looks like I only have to remove the pin in balance bar to remove this right and do I just have to push the pin out or is there a trick. Thanks in advance for any help I can get. New to all this and so glad I found this site. Looks like it's going to be very helpful. Thanks....Shan
Sign up now
to remove ads between posts
Jan 14, 2012, 07:31 PM
Registered User
RTF Extreme's Avatar
It's a really easy fix and yes, you have to remove the flybar. You can order the parts you need from or from some vendors in China, but be prepared to wait three weeks.

To increase forward flight performance, you can buy a set of magnets from any crafts store and glue it under the canopy. You can always add more magnets or take away.

For removing the balance bar, you will need a small screwdriver to push out the pin. This can be a pain but it will eventually come out. Good luck!
Last edited by RTF Extreme; Jan 14, 2012 at 07:39 PM.
Jan 14, 2012, 08:17 PM

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion blinking board lite on dh 9101 npd136 Coaxial Helicopters 21 May 29, 2015 12:04 PM
Help! Help fixing SM Double Horse 9101!!! ShanS Beginner Training Area (Heli-Electric) 8 Jan 24, 2012 12:46 PM
Help! DH 9101 parts replacement npd136 Coaxial Helicopters 1 Jan 03, 2012 08:01 AM
Help! RC DH 9101-09 inner shaft revatoons Electric Heli Talk 0 Nov 23, 2011 07:54 PM
Discussion DH-9101 Tail Rotor gordonzo Coaxial Helicopters 0 Aug 30, 2011 06:11 PM