some diy controller designs for brushed controllers - RC Groups
Thread Tools
Oct 06, 2003, 05:44 PM
homo ludens modellisticus
Ron van Sommeren's Avatar
FAQ

diy brushed controller designs, compilation


Compilation of a brushless ESC designs:
www.rcgroups.com/forums/showthread.php?s=&threadid=140454


DIY controller designs for brushed motors.

Please report dead links.
Met vriendelijke groet Ron van Sommeren
diy outrunner brushless e-motor discussion.
Electric fly-in Nijmegen, the Netherlands.
Last edited by Ron van Sommeren; Jul 23, 2015 at 10:34 AM.
Sign up now
to remove ads between posts
Oct 07, 2003, 03:52 PM
Registered User
Check out the Microchip Web site www.micrchip.com for AN847. It has theory of operation, schematics, and software. Definately worth a look
Jan 15, 2004, 10:34 PM
Registered User
For anyone interested there is a 12F675 based ESC, construction details etc., that I am using described here:

http://www.designsoft.com.au/ahome/rc/PIC-ESC/ESC.html

The following link also has useful information:

http://homepages.paradise.net.nz/bha...ectronics.html
Last edited by TugBoat; Jan 15, 2004 at 10:43 PM.
Jan 15, 2004, 11:27 PM
Dismembered Member...
arx_n_sparx's Avatar
Are there any DIY projects for a brushless motor. I have an AXI 2212/34 on order

Thanx

Brad
Jan 20, 2004, 09:40 AM
homo ludens modellisticus
Ron van Sommeren's Avatar
Added:
https://www.rcgroups.com/forums/show...hreadid=190829

Brushless diy designs:
https://www.rcgroups.com/forums/show...hreadid=140454
Last edited by Ron van Sommeren; Jul 22, 2015 at 10:49 AM.
Aug 22, 2004, 01:34 PM
homo ludens modellisticus
Ron van Sommeren's Avatar
Discussion on this design:
http://www.designsoft.com.au/ahome/rc/ -> "Brushed Motor ESC"

https://www.rcgroups.com/forums/showthread.php?t=259623

Met vriendelijke groet Ron van Sommeren
Sep 11, 2004, 05:53 PM
Senior Member
soren's Avatar
Look here for a lot of places to find information about brushed controllers:
http://rcgroups.com/links/index.php?...at=204&id=3304
..The E-zone from the lab september 1999, where I was a guest columnist...

Soren
Oct 06, 2004, 07:31 AM
homo ludens modellisticus
Ron van Sommeren's Avatar
Added Stefan Vorkoeters designs:
http://www.capable.ca/rcstuff/ -> Motor control
Oct 13, 2004, 06:21 PM
Registered User
norbique's Avatar
Another one:
http://norbique.rchomepage.com/esc/index.htm
Jan 23, 2005, 05:15 PM
Always right
Hovertime's Avatar
Just wanted to thank you guys for information!
Jun 13, 2005, 09:34 AM
homo ludens modellisticus
Ron van Sommeren's Avatar
Added
http://norbique.rchomepage.com/
Aug 23, 2005, 11:31 AM
flying thing
lostrider's Avatar
http://www.capable.ca/rcstuff/esc.htm
i have built this,
on the test:without the radio;
when s1 is on: motor power is full; but
i cant see any voltage on ch+ and ch- cables???
so my radio dont work; without the power?
Aug 23, 2005, 11:33 AM
flying thing
lostrider's Avatar
i've checked all solderings but cant find anything seems wrong???