Guanli A10 twin EDF Foamy ESC control mixing with a Futaba 9C - RC Groups
Thread Tools
Jan 10, 2012, 09:20 PM
idiot (non-savant)
tdrnmartin's Avatar

Guanli A10 twin EDF Foamy ESC control mixing with a Futaba 9C

I have a Guanli A10 foamy that is running with 2 GL5030 fans. They are brushless out runners controlled by 2 separate ESCs that connect to a single Lipo. The stock setup has the throttle wires connected to a y-harness and then to the RX. I was thinking that if I slaved an auxiliary channel to the throttle, that I could control each ESCs/Fans with its own channel. Taking this one step further, I thought it might be possible to slave both the throttle and the aux channel to the rudder to allow for a thrust differential rudder. I'm having some problems with the first step is just getting the initial mixing for throttle control down and I was wondering if there were any Futaba 9C experts out there that might have some pointers on the setup....

Sign up now
to remove ads between posts
Jan 17, 2012, 01:45 PM
idiot (non-savant)
tdrnmartin's Avatar
Never mind. I think i found what i need...

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Banana Hobby A10 TWIN EDF - oopsed madpatter Atlanta Area RC 2 Jun 01, 2011 08:47 AM
Discussion Futaba 9C Mixing Tips? venquessa Radios 2 Mar 17, 2011 09:51 AM
Discussion Need help with mixing and Futaba 9C Cralis Radios 4 Jun 04, 2010 11:16 PM
Discussion Futaba 9C, need help with mixing. mariner02 Radios 6 Nov 03, 2009 07:59 AM
Twinjet - twin ESC control and mixing DanC Foamies (Kits) 2 Jun 24, 2001 08:17 PM