Thread Tools
Jul 27, 2012, 01:42 AM
Registered User
Quote:
Originally Posted by Newbmeister
I was afraid of that. Hopefully they won't be total suckage and will be ok for simple things like hovering and simple circuits while I get used to flying it.

I think I'll order some Turnigy nanotech 300mAh batteries. Tom Z had posted some pretty decent numbers using these but I haven't seen any comments about how they hold up in the long term after a good number of charge/discharge cycles. I suppose for $1.82 each I could risk a few.
Hi

I don't like how the nano 300 fits the battery holder.
Personally I go for the new nano 260 to start with.

Regards
Paul
Sign up now
to remove ads between posts
Jul 27, 2012, 12:50 PM
Registered User
What protocol does the Mini CP use?

Im wondering as id love to find a tx that could control both a Mini cp and my v911's.

Im confused, does the mini cp have 2 versions? one with 3 axis gyro and one with 6 axis?

http://www.ehirobo.com/shop/product_...9{33}233{31}201 <- 6 axis.

http://www.rc711.com/shop/24g-walker...65_122_292_294 <- 3 axis with devo 7e
Last edited by Xermalk; Jul 27, 2012 at 04:13 PM.
Jul 27, 2012, 05:55 PM
Registered User
Xermalk, are you confusing 6ch ( channel ) with 6 axis. They both say 3 axis FBL.
BTW, has anyone used 5320 servos on mini? What needs to be changed in order to use those?
Jul 27, 2012, 06:09 PM
Registered User
Quote:
Originally Posted by Skovoroda
Xermalk, are you confusing 6ch ( channel ) with 6 axis. They both say 3 axis FBL.
BTW, has anyone used 5320 servos on mini? What needs to be changed in order to use those?
i should get some more sleep, noticed its *only* banggood that seems to have the missprint http://www.banggood.com/Wholesale-Wa...r-p-39446.html

everyone else lists 3 axis.

Btw whats that engrish update feature mention everywhere if you have the devo 8s?

Edit, is there any heli for the Phoenix Rc sim that even remotely resembles the flight characteristics of a Mini CP?
Last edited by Xermalk; Jul 27, 2012 at 06:26 PM.
Jul 27, 2012, 06:15 PM
Registered User
Quote:
Originally Posted by Skovoroda
Xermalk, are you confusing 6ch ( channel ) with 6 axis. They both say 3 axis FBL.
BTW, has anyone used 5320 servos on mini? What needs to be changed in order to use those?
Dude, you seriously don't read. Go back 1-2 pages...
Jul 27, 2012, 08:17 PM
Don't Drink & Fly
TapouT21's Avatar
Delete please. replied to a post, then after reading more posts realized my suggestions wouldn't be any good for the person they were meant for.
Last edited by TapouT21; Jul 27, 2012 at 08:23 PM.
Jul 27, 2012, 08:36 PM
Registered User
Quote:
Originally Posted by Skovoroda
Xermalk, are you confusing 6ch ( channel ) with 6 axis. They both say 3 axis FBL.


The box for my Mini CP actually says 6 Axis gyro.
Jul 27, 2012, 08:50 PM
Registered User
Quote:
Originally Posted by dway


The box for my Mini CP actually says 6 Axis gyro.
Mine says 3 did they make new mini and didn't tell anyone?
Jul 27, 2012, 08:56 PM
Registered User
Quote:
Originally Posted by itsmillertime
Dude, you seriously don't read. Go back 1-2 pages...
Ooops....
Jul 29, 2012, 06:09 AM
Registered User
Does anyone know what kind of telemetry data you would get with a Devo 7E controler when paired to a Walkera Mini cp?


Seems the Devo 8s has Voltage,Temperatur and Gps information.
http://www.maxsuner.com/images/walke.../minicp-04.jpg

Edit, what Spare parts/Battery's/ Brushless kit? should one get when buying a Mini CP?
Last edited by Xermalk; Jul 29, 2012 at 09:36 AM.
Jul 31, 2012, 03:33 PM
Registered User
Ouch.... my mini started doing positive/negative pitch by itself all of the sudden. So i just zoom around and all of the sudden it goes up or down. Trying to investigate what exactly causes that, but it seems like it happens at the begginnig/ after exiting the maneuver. I was practicing figure 8 today, on the left turn couple of times it went up, going down mostly on the right turns. The swash just lifts/ lowers all by itself and there is no way to correct it. Was landing down with the throttle stick all the way to the top and rotor spinning at the max rpm. Its not a loose shaft either. After the landing/crash, if i kill the throttle, the swash levels and everything is back to normal until it happens again. There was another dude who had this problem, he says that cleaning the servo plugs solved it for some time until the problem returned. Did anyone had anything similar, any advice on how to fix it?
Jul 31, 2012, 03:54 PM
Blade 180 FPV & Mini-Protos
Picofly's Avatar
Wohoo!

Here are my first FPV loops and rolls with the Mini CP .

My first FPV rolls and loops (1 min 56 sec)


Sub-micro FPV flight at my friend's summer cottage. (3 min 4 sec)
Jul 31, 2012, 09:44 PM
Registered User
i812's Avatar


Thanks for sharing!

Looks like you're doing very well with it. Congratulations
Aug 01, 2012, 12:40 PM
Fan of just about anything RC
SoloProFan's Avatar
Nice vid! I'd love to be able to fly this way. Landing seems a bit rough though.
Aug 01, 2012, 04:23 PM
RC Helis: My Healthy Obsession
Okay Picofly that was very cool. Thanks for sharing.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Cool World Smallest Lightest Indestructible 3D helicopter :Genius CP!! DLY Micro Helis 9889 May 18, 2016 12:17 PM
Discussion Walkera Genius CP-the smallest 3d flybarless heli in the world! @ oomodel oomodel.com Hot Online Deals 17 Sep 28, 2015 10:48 AM
Careful! World Smallest Lightest Indestructible 3D helicopter Genius CP "More Junk" Iceblade1A Micro Helis 91 Sep 25, 2011 11:38 AM
For Sale Walkera 52 CP 3S MICRO heli(smaller than a Gaui)$75 DELIVERED Z06 Tony Aircraft - Electric - Helis (FS/W) 0 Aug 16, 2009 07:38 PM
Question Whatís Better than a Blade CP and Smaller than a Trex? HavingFun2002 Micro Helis 74 Mar 05, 2006 05:07 PM