Possible Micro Nieuport 25 - RC Groups
Thread Tools
Jan 07, 2012, 06:58 PM
Registered User
Discussion

Possible Micro Nieuport 25


Did a paper mock up of Nieuport 25 to a 14.5" WS . I like the 25's tail area more than the 17 so I might try one after I mod the DR-1.

Pete
Sign up now
to remove ads between posts
Jan 07, 2012, 09:40 PM
TheyreComingToTakeMeAway!
derk's Avatar
looks nice, though that lower wing is very narrow
and of coarse it will need a light tail because of that short nose
Jan 07, 2012, 09:46 PM
Registered User
Mendo's Avatar
What prop is the one farthest from the nose of the nieuport?
Jan 07, 2012, 10:23 PM
Power Wheels Guru
UNGN's Avatar
Quote:
Originally Posted by Mendo
What prop is the one farthest from the nose of the nieuport?
That looks like a cut down mustang prop.
Jan 08, 2012, 08:17 AM
Registered User
Mendo,

It's a FZ Prop the other is a PZ P-51 std prop not yet cut of finished.

Derk,
Yes, that bottom wing is thin and like my Nieuport 17 you're right everything must be up front and the tail area light. I plan to use 1mm for the tail areas if I start this bird. Also this one will have ailerons to get somemore weight up front. Gene (Speedy01) gave me a HK rotor micro servo that will work great to do the aileron push rods that come up through the fuselage in front of the cockpit.

Pete
Jan 08, 2012, 08:58 AM
Gravity is a harsh mistress.
Tim Wolff's Avatar
You got a thing for Nieuports huh?

My fave is the 11. Having a Micro Invent 11 really helped. I still miss that plane.
Jan 08, 2012, 11:13 AM
billyjim
Quote:
Originally Posted by Tim Wolff
You got a thing for Nieuports huh?
Yeah, I'm another one for those Nieuports. Did an 11 and a 28 using the early PZ guts, then an 11, 17, and 28 using Flyzone guts. All of them flew, some well, some not so well.

Bill
Jan 08, 2012, 03:26 PM
-=BS=-
BlazingStar's Avatar
Sweet.
Jan 10, 2012, 08:06 AM
Registered User
I do like the history and the looks of the Nieuports 11-27 not much of a fan of the 28 though.

I would like to do an 11 but I know the top Lewis gun would get ripped off all the time when flying, chrashing and whacking in

Pete
Jan 11, 2012, 09:41 PM
Registered User
Cut some foam for this bird. Next to bake the wings in my new Speedy01 wing jig. I also need to redo the cowling as this mock up is way off.

Also got my new used RNAS No.6 book by M. Westrop with Mark Millers excellent renderings of the Nieuport 17Bis they used.

Pete
Last edited by mtflyr; Jan 12, 2012 at 06:36 AM.
Jan 12, 2012, 07:43 AM
Registered User
Quote:
Originally Posted by mtflyr
I like the 25's tail area more than the 17 so I might try one after I mod the DR-1.
Hallelujah - I sure am glad that your dreaded wa-wa "I'm taking some time off" symptoms have subsided!!! So I'm looking forward to AT LEAST three more mtflyr projects that are in the queue for the near future.

All is good in the world of micros.

Gene K
Jan 12, 2012, 01:23 PM
Registered User
Quote:
Originally Posted by mtflyr
Cut some foam for this bird.
What happened to the AR6400 antenna...again?

Gene K
Jan 12, 2012, 02:26 PM
Registered User
Who was that guy who soldered it back on It came off again good eye, now that I know to watch for this during a build I will be sure it's reattached.

Thanks

Pete
Jan 12, 2012, 03:44 PM
-=BS=-
BlazingStar's Avatar
Maybe I'll move to VA just to hang out and learn from you guys
Jan 12, 2012, 07:28 PM
Registered User
Using Speedy01's wing jig I baked a perfct set of undercambered 2mm Depron wings for this bird. Next the LG.

Pete


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Start of Micro Nieuport 17 mtflyr Scratchbuilt Indoor and Micro Models 77 Dec 23, 2011 11:07 AM
Sold feeler ad. going micro helis possible 2 nib edf's for sale crash8384 Aircraft - Electric - Jets (FS/W) 6 Oct 30, 2011 11:46 AM
Question Looking for a micro Nieuport 11 kit helipilot Scratchbuilt Indoor and Micro Models 6 Sep 21, 2009 09:45 AM
Sold peanut scale Nieuport 11 micro invent Flying glass Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 0 Mar 16, 2008 04:39 PM