Needed: Plans for bluecor SLOW flyer - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 05, 2003, 05:25 PM
Tree? That's a Tx weed!
crashsiegel's Avatar

Needed: Plans for bluecor SLOW flyer

I'm kinda new at indoor stuff - 5 weeks/sessions.
I am looking for a bluecor SLOW flyer, would expect something with a LOW wing loading. GWS gear is readily available at my favorite LHS. Prefer 2S or 3S lipo (kokam 1020, 1200) power.
Plans anyone?

My Slow Stick will fly again as soon as I figure how to fix/replace the LE/landing gear mount. But it is a bit big and I have managed to break the mount, bend the tube, destroy the wing (I HATE backboards!), break many 11x8 props, bend several shafts (replaced twice) and generally bend up the tail. But it still looks better than some of the others that are "flying" with me.

My Super Fly RC Super Flea Twin is a scream and VERY tough (bounces off steel roof beams). But it is a bit on the fast side for me. I need something slower to practice with so I can settle down on the sticks.

Sign up now
to remove ads between posts
Oct 06, 2003, 08:29 AM
Registered User
hey Crash,
You may want to build a variation of Gene Bond's bluestick if you're looking for a bluecor slow flyer.

Between the backboards, the Super Fleas and that air handler...that's a pretty perilous place to fly!
Oct 06, 2003, 08:21 PM
Tree? That's a Tx weed!
crashsiegel's Avatar
Checking it out.
Oct 07, 2003, 04:44 AM
Registered User

Blue foam + GWS bits + LiPolys = lots of fun!!

Oct 07, 2003, 05:51 PM
Tree? That's a Tx weed!
crashsiegel's Avatar
Oct 07, 2003, 06:59 PM
Fanfold abuser
Jgardner's Avatar

Lots of choices

If you are willing to set yourself to split F3 there are tons of choices. Here is a recent post with splitting links

If you build Hippo's Blue Frog in split F3, use a LPS motor and a small lipoly, you will have a big, slow, fine flying plane. If you search my posts you will find a number of workable split F3 examples.

Good luck.