New Products Flash Sale
Thread Tools
Old Apr 01, 2012, 12:35 AM
2Doggs is online now
Find More Posts by 2Doggs
Two helis flying
2Doggs's Avatar
Quote:
Originally Posted by VISTAVEGA View Post
can I go into the tail settings in advanced menue and set it the same as soft 3 d?
I did notice the tail didnt stop quit as fast but still very aceptible .
Absolutely! If the tail works well in one of the presets, you can copy those values into your own custom settings, which might use the cyclic settings from another preset. Every heli is different (special?) so just use the settings that work for you.

Since you have the USB adaptor, it's really easy to save all your settings in a .ini file - and it helps if you give the file a descriptive name that will mean something to you when you look at it some time in the future.

Do make sure that your heli is as good as it can be mechanically - otherwise you'll be chasing a moving target.
Sign up now
to remove ads between posts
Old Apr 01, 2012, 01:17 AM
Pitchlynn is offline
Find More Posts by Pitchlynn
Registered User
Quote:
Originally Posted by Dawk View Post
Hi, I got rid of "Wobble of Death" by shortening servo arm ball distance from 12 to 8 mm, on my CopterX 450, like you told me.
All was nice, BUT... Today I flew twice, then decided to remove the training kit and, sadly, I immediatly got "WOD" again :-(
The training kit seemed to somewhat stabilize the heli / FBL module.
What can I do now to get rid of it again ? Lower some gain ?
Thanks in advance for any help.
I have the copterx head and started out with the WOD. Move your servo balls into about 5.5mm. I tried lowering the gains to 20 when I had longer servo arms. That got rid of the WOD but the heli was very unstable. With the balls at 5.5mm and the gains at default it flies like a dream.
Old Apr 01, 2012, 02:27 AM
MikeHRC is online now
Find More Posts by MikeHRC
Team Mulikow 3D
Quote:
Originally Posted by 2Doggs View Post
Every heli is different (special?) so just use the settings that work for you.
I love the ide that all helis are "special" - some of mine are very "special" and not in a good way
Old Apr 01, 2012, 06:33 PM
hudsonaj36 is offline
Find More Posts by hudsonaj36
Registered User
First off thanks for all the help from all here. I have been lurking for a while.

When I adjust the gain setting on the radio, does that only affect the tail gain or does it affect all the gain settings?
Old Apr 01, 2012, 06:45 PM
Dawk is offline
Find More Posts by Dawk
Registered User
Quote:
Originally Posted by Pitchlynn View Post
I have the copterx head and started out with the WOD. Move your servo balls into about 5.5mm. I tried lowering the gains to 20 when I had longer servo arms. That got rid of the WOD but the heli was very unstable. With the balls at 5.5mm and the gains at default it flies like a dream.
Thank you for your answer and your help. I'll give a try.
5.5mm seems so close
Does any CopterX owner confirm having these wobble / shaking and need such a close distance with servo arms ?
Old Apr 01, 2012, 06:48 PM
Dawk is offline
Find More Posts by Dawk
Registered User
Quote:
Originally Posted by hudsonaj36 View Post
First off thanks for all the help from all here. I have been lurking for a while.

When I adjust the gain setting on the radio, does that only affect the tail gain or does it affect all the gain settings?
Nobody answered yet, so I'll try to help you.
As far as I know (but I only know a little) the gain in radio (gyro gain) is only for the tail.
Cyclic gain is adjusted in FBL module.
(Can someone more experimented confirm ?)
Old Apr 01, 2012, 07:11 PM
mhills51 is offline
Find More Posts by mhills51
Registered User
mhills51's Avatar
Yes

Now it's my turn. I thought I had every thing set up in my 250. All servos going the right direction, when you move the heli the gyro is working in the right direction, but it ends up my collective is 100% backwards. What do I need to change? Futaba radio.
Old Apr 01, 2012, 07:15 PM
mhills51 is offline
Find More Posts by mhills51
Registered User
mhills51's Avatar
I did fly my 450fbl today. I don't like the dead band on the tail at all. I also realized in my rush to get it in the air I didn't check how much pitch I had. Need to plug it back into the computer and increase it.
Old Apr 01, 2012, 07:21 PM
hudsonaj36 is offline
Find More Posts by hudsonaj36
Registered User
Copy that, only for the tail. Thanks

Mhills51
Go back into setup and change your collective pitch adjustment to a negative number, if it is already negative make it positive. This will reverse your collective.
Old Apr 01, 2012, 07:47 PM
mhills51 is offline
Find More Posts by mhills51
Registered User
mhills51's Avatar
Thanks! all fixed! massive brain fart.
Old Apr 01, 2012, 08:57 PM
ridge_racer is offline
Find More Posts by ridge_racer
Registered User
Quote:
Originally Posted by Dawk View Post
Nobody answered yet, so I'll try to help you.
As far as I know (but I only know a little) the gain in radio (gyro gain) is only for the tail.
Cyclic gain is adjusted in FBL module.
(Can someone more experimented confirm ?)
Both correct. Only for the tail..
Old Apr 01, 2012, 08:59 PM
Black_heart is online now
Find More Posts by Black_heart
Texas NewB
Black_heart's Avatar
Quote:
Originally Posted by mhills51 View Post
Yes

Now it's my turn. I thought I had every thing set up in my 250. All servos going the right direction, when you move the heli the gyro is working in the right direction, but it ends up my collective is 100% backwards. What do I need to change? Futaba radio.
change your collective pitch for opposite of how you have it +95 well be -95
Old Apr 02, 2012, 09:26 AM
wc_wickedclown is offline
Find More Posts by wc_wickedclown
Registered User
what is a good pitch and good rpm setting for the 450 pro ?
Old Apr 02, 2012, 09:47 AM
Dawk is offline
Find More Posts by Dawk
Registered User
Quote:
Originally Posted by wc_wickedclown View Post
what is a good pitch and good rpm setting for the 450 pro ?
1- What is the title of this thread ?
Oh yeah "PC Software for Setup/Programming the CX-3X1000, 3GYS, TG-1, ZYX etc."
2- I googled your exact question and had the answer...
Old Apr 02, 2012, 12:08 PM
Dr.M is offline
Find More Posts by Dr.M
Registered User
Dr.M's Avatar
Quote:
Originally Posted by Dawk View Post
Thank you for your answer and your help. I'll give a try.
5.5mm seems so close
Does any CopterX owner confirm having these wobble / shaking and need such a close distance with servo arms ?
Whatever flies right.

If u can get 12deg collective and 7-8 cyclic with the servo horns that short, go for it. It all depends on the length of your blade grip arms and the design of the frame.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Darthdrk Drone CX Body for coax helis like the Blade CX etc. Twmaster Aircraft - Electric - Helis (FS/W) 0 Oct 08, 2011 08:31 PM
Multiplex mc V2 servo programming PC software Thomas B Radios 3 Jul 23, 2006 10:49 AM