Shop our Airplanes Products Drone Products Sales
Thread Tools
Feb 09, 2012, 05:03 PM
taking time on my ride
IFHELI's Avatar

CX3X1000 USB Setup Software


The software can be downloaded here. I saw this posted on Helifreak today.

http://www.ky-model.com/copterx/CX-3X100USB.zip
Sign up now
to remove ads between posts
Feb 09, 2012, 06:09 PM
as much as I can
beenflying's Avatar
Thanks, IFHELI. Added the link to the first post.
Feb 09, 2012, 08:00 PM
Registered User
Interesting that my cable arrived today even with the tracking info still showing the item at ISC NYC...?? Thanks again all for making this software work with all 3 gyros. I'll give it a try on my functional 3gys..
Feb 10, 2012, 04:39 AM
Registered User
On Tarot ZYX, between blue and red lights which corresponds to HH and which to Rate?
Feb 10, 2012, 05:09 AM
Registered User
Blue = Rate
Red = HH
Feb 10, 2012, 10:27 AM
Registered User
tdriver's Avatar
Quote:
Originally Posted by IFHELI View Post
The software can be downloaded here. I saw this posted on Helifreak today.

http://www.ky-model.com/copterx/CX-3X100USB.zip
does it work with the tarot usb cable?
Feb 10, 2012, 10:51 AM
Registered User

FyeTech USB-TTL


Quote:
Originally Posted by 2Doggs View Post
No, the power needs to come from your flight pack, or a bec. You need to bind the RX to your TX too. There is no power used through the USB cable.
Finally the CX-3X1000 arrived and its works with FyeTech USB-TTL (disconnect the red cable from USB-TTL first) and the Software.

Thank you all for your help.

John thank you also for the software.
Feb 10, 2012, 04:02 PM
taking time on my ride
IFHELI's Avatar
Tdriver,

Yes.. It worked fine with the tarot usb cable I have.
Feb 11, 2012, 10:30 AM
Registered User

USB to IR for Tarot ZYX


Does anyone interested an IR (Infrared ie: wireless) version of the USB cable? I am thinking of building one. Can be done easily with a pair of IR Tx & Rx. (they used to fitted on older laptops). I believe the Tarot comms is 9600 which is well accepted by the IR devices.
Last edited by ptern; Feb 11, 2012 at 10:37 AM.
Feb 11, 2012, 10:45 AM
Registered User
John (or anyone) could you post some info about the advance page and some description how to usethem. Lost and confused about the items in there.
Feb 11, 2012, 11:32 AM
Mallcopterist
2Doggs's Avatar

Presets


Quote:
Originally Posted by ptern View Post
John (or anyone) could you post some info about the advance page and some description how to usethem. Lost and confused about the items in there.
You should find most if not all the information within this thread, but I guess it's getting pretty long by now!

If you've tried out all of the five preset models, it should give you a reasonable understanding of how the parameter values affect how the heli flies.

Let's say you've settled on one preset as your preferred flying mode. In my own case, I use model #5, tamed with 40% expo, and also 80% rates in normal flight mode.

The one thing I've needed to change thus far has been the tail parameters, to reduce tail bounce. The single parameter that had the most effect on that was tail deceleration. On my 450 Pro with a 9257 clone, I ended up with PID values of 70 30 15, accel 100 and decel 20 after quite a few battery packs of testing on a Lazy Susan, and those settings seem to work well for me in flight.

If you're using analog cyclic servos, you might need to alter some of the cyclic gains, but for now I've left them all at their defaults.
Feb 11, 2012, 12:21 PM
Registered User
Quote:
Originally Posted by beenflying View Post
Yes, the program box is nice for taking to the flying field, unless you're happy to take a laptop. Also for $5 plus shipping (for the USB link), it helps to make this gyro a good low cost option as well, without the limitations of the Tx programming.
Where can I get the USB link for $5
Feb 11, 2012, 12:37 PM
Mallcopterist
2Doggs's Avatar

Ac-rc


Quote:
Originally Posted by freshmint View Post
Where can I get the USB link for $5
Here but of course there's shipping on top of that. They have plenty of other useful stuff you might consolidate into one order, however, to mitigate shipping costs.
Feb 11, 2012, 02:29 PM
Registered User
Quote:
Originally Posted by ptern View Post
John (or anyone) could you post some info about the advance page and some description how to usethem. Lost and confused about the items in there.
Version 1.16 of the software includes the descriptions for each of the advanced page items from the text that Jaahaavi put together (here). I just haven't released it yet as I need to finish off the Russian translation (thanks Ruslan).
If anyone else would like a different language and is willing to provide the translation, let me know.
Last edited by John_NZ; Feb 11, 2012 at 02:37 PM.
Feb 11, 2012, 03:59 PM
I don't want to "Switch Now"
pmackenzie's Avatar
Quote:
Originally Posted by 2Doggs View Post
Here but of course there's shipping on top of that. They have plenty of other useful stuff you might consolidate into one order, however, to mitigate shipping costs.
Shipping for the USB link only was $3. Not a bad deal IMO.

Pat MacKenzie


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Darthdrk Drone CX Body for coax helis like the Blade CX etc. Twmaster Aircraft - Electric - Helis (FS/W) 0 Oct 08, 2011 07:31 PM
Multiplex mc V2 servo programming PC software Thomas B Radios 3 Jul 23, 2006 09:49 AM