New Products Flash Sale
Thread Tools
Old Aug 22, 2012, 10:45 AM
weaser42 is online now
Find More Posts by weaser42
House of Paine
weaser42's Avatar
Wow, I consider the -380 on 6S with Xoar 15x8 insane (no plans to change)... what prop were you running with a -500 on 6S?
Sign up now
to remove ads between posts
Old Aug 22, 2012, 11:26 PM
kodiak ak is offline
Find More Posts by kodiak ak
Registered User
Thanks SteveT for the info.

I will look through my parts drawer to see if I have an servo arms that are longer. If not I will pick some up.

Will N.
Old Aug 23, 2012, 05:14 PM
keithy4129 is offline
Find More Posts by keithy4129
Registered User
Quote:
Originally Posted by weaser42 View Post
Wow, I consider the -380 on 6S with Xoar 15x8 insane (no plans to change)... what prop were you running with a -500 on 6S?
I run a apc 15x7e on my motrolfly 4315 500 kv, tons of power
Old Aug 23, 2012, 09:28 PM
kodiak ak is offline
Find More Posts by kodiak ak
Registered User
I'm planing to run a 15x7 or 15x8 on 4s 714Kv. I will have to do some testing both on the ground to check for amps and watts and in the air to test for the feel.

Will N.
Old Aug 25, 2012, 01:35 PM
RCPilot1234 is offline
Find More Posts by RCPilot1234
Registered User
Hi everyone

I've just ordered one of these in yellow! I'll be using Aurora RC Andromeda lights on here (the sticks have been shortened). I plan to mount the lights onto the SFG's so I can use the SFG's as the mounts

I've read the SFG's barely make a difference to flight performance on this plane. Is that so? Great if it is as it means it'll be okay to not use them without the lights On my EF planes they make quite a big difference but about on here? Also, what screws would you recommend for them? I've heard the ones that come with them aren't very good, haha!

Also the lights will add about 180g to the airframe. I think this will be fine as I've read the airframe can cope with weight very well Is this so?

Here is my planned setup:
Motor: Motorfly DM4315-714 (already got it) (what spacers will I need?)
ESC: Castle ICE Lite 100
Prop: Xoar 15x8 or 16x7
BEC: Castle BEC Pro 20A (is that overkill? Would the 10A be okay?)
Spinner: White 63mm one will be alright
Servos: JRDS3711HV all round at 7.4V (what servo arms should I get for these?)
Battery: Thunder Power 3850 mAh 65C 4S (these are working very nicely in my Slick 59 giving me flight times of about 4:30-5 minutes)

Thanks!
Old Aug 25, 2012, 10:23 PM
weaser42 is online now
Find More Posts by weaser42
House of Paine
weaser42's Avatar
Man, this plane with the Motrofly 4315-480 is a hoot!
Old Aug 25, 2012, 10:34 PM
SnowDog1974 is offline
Find More Posts by SnowDog1974
Registered User
SnowDog1974's Avatar
nice shots! nice flying!
Old Aug 26, 2012, 12:44 AM
RC4x4 is offline
Find More Posts by RC4x4
Fly Low or you'll never know!
RC4x4's Avatar
Nice shots of the Edge. I think I need one of these planes. I miss flying at the park with some friends of mine.


Cory
Old Aug 26, 2012, 06:22 AM
RCPilot1234 is offline
Find More Posts by RCPilot1234
Registered User
How much difference do the SFG's make? And what are the best screws for them? I've heard the ones it come with aren't very good. I plan to glue my lights onto the SFG's

Great pictures by the way Yellow looks great
Old Aug 26, 2012, 10:09 AM
nebwake is offline
Find More Posts by nebwake
Registered User
nebwake's Avatar
Did anyones edge come with vinyl? Mine just came with the crap stickers like the 48" edge unlike my 59 slick and 74 edge which both came with decent vinyl.
Old Aug 26, 2012, 11:09 AM
weaser42 is online now
Find More Posts by weaser42
House of Paine
weaser42's Avatar
The first day out I had an SFG come off using the nylon screws which came with it. I did fly it for two more flights w/o SFG but can't really make a comparison as I had ESC issues and other things going on that day.

I replaced the nylon with some metal hex screws I had lying around which fit the blind nuts and those have had no problems in 16 flights.

I don't recall what graphics my 58 came with but I'm pretty sure what I used on mine came from my 74.
Old Aug 26, 2012, 01:52 PM
RCPilot1234 is offline
Find More Posts by RCPilot1234
Registered User
Quote:
Originally Posted by weaser42 View Post
The first day out I had an SFG come off using the nylon screws which came with it. I did fly it for two more flights w/o SFG but can't really make a comparison as I had ESC issues and other things going on that day.

I replaced the nylon with some metal hex screws I had lying around which fit the blind nuts and those have had no problems in 16 flights.

I don't recall what graphics my 58 came with but I'm pretty sure what I used on mine came from my 74.
Thanks I'm going to glue some lights to the SFG's so hopefully they can take the strain with the metal screws
Old Aug 27, 2012, 10:19 AM
SnowDog1974 is offline
Find More Posts by SnowDog1974
Registered User
SnowDog1974's Avatar
Quote:
Originally Posted by weaser42 View Post
The first day out I had an SFG come off using the nylon screws which came with it. I did fly it for two more flights w/o SFG but can't really make a comparison as I had ESC issues and other things going on that day.

I replaced the nylon with some metal hex screws I had lying around which fit the blind nuts and those have had no problems in 16 flights.

I don't recall what graphics my 58 came with but I'm pretty sure what I used on mine came from my 74.
Quote:
Originally Posted by RCPilot1234 View Post
Thanks I'm going to glue some lights to the SFG's so hopefully they can take the strain with the metal screws
The SFG screws are 3mm.

The graphics that come with the 58 are minimal at best....really not large enough for the 58" ... perhaps they came from the smaller model. This plane screams for some custom bling
Old Aug 27, 2012, 12:12 PM
RCPilot1234 is offline
Find More Posts by RCPilot1234
Registered User
Quote:
Originally Posted by SnowDog1974 View Post
The SFG screws are 3mm.

The graphics that come with the 58 are minimal at best....really not large enough for the 58" ... perhaps they came from the smaller model. This plane screams for some custom bling
Cheers Hopefully they'll be able to hold on the extra weight from the lights, haha!

By the way everyone, should I go for JR 3711HV or 3717HV for the ailerons? The 3717's have less torque but more speed. What do you think?

Thanks
Old Sep 01, 2012, 04:48 PM
3Dplank is offline
Find More Posts by 3Dplank
TEAM HILLBILLY
3Dplank's Avatar
Oops I bought one of these (red) faster


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 60 inch edge 540 vs 48 inch extreme flight extra 300 & edge 540 vs 3dhs slick 51 & 59 CRFan1 3D Flying 40 Mar 04, 2012 03:45 PM
Sold 3DHS Omega 130g NIB 58.00 Shipped boatdoc Aircraft - Electric - Power Systems (FS/W) 9 Aug 28, 2011 10:16 AM
Discussion 3dhs edge 41" edge as second ish) plane? Mr Bloppy 3D Flying 19 Aug 25, 2010 10:43 AM
Wanted Wanted - 47" - 58" 3DHS, EF or Sebart plane paintball_kidz Aircraft - Electric - Airplanes (FS/W) 0 Jan 03, 2010 12:12 AM
Wanted 47"-58" size 3DHS, Sebart or Extreme Flight paintball_kidz Aircraft - Electric - Airplanes (FS/W) 13 Jan 02, 2010 01:52 AM