3DHS 58" Edge 540 - V2 - thread has extra posts!!! - ON SALE!! - extremeflightrc.com - Page 98 - RC Groups
Thread Tools
Jan 05, 2013, 02:50 PM
Honeybadger don't care...
Luv3d's Avatar
Wing tube failed on the 2nd flight in a pretty gentle parachute. About 7 total minutes of life for that airframe.
Sign up now
to remove ads between posts
Jan 05, 2013, 03:41 PM
Registered User
nebwake's Avatar
That is crazy, I put mine through hell every time it sees the air.
Last edited by nebwake; Jan 05, 2013 at 08:26 PM.
Jan 05, 2013, 05:14 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by Brownie433
Wow, folks weren't kidding about this bird being a tail heavy build. I have the 4315-714 (with 1/2" spacers), ICE 100 (on the motor box), and the 4S battery is almost completely under the cowling at 3.75" CG.

I hate to add dead weight, but I need to access the battery better for strapping down. I rather add weight than eject a battery.

Mike
That's why I went with a 5S system and a heavier motor....but I am waiting on my new packs.

SteveT
Latest blog entry: My hangar...
Jan 05, 2013, 05:50 PM
Honeybadger don't care...
Luv3d's Avatar
Surprised the heck out of me too- the tube had no visible damage when I inserted it, and it was not damaged in shipping. Bummed me out.

Quote:
Originally Posted by nebwake
That is crazy, I put mine through he'll every time it sees the air.
Jan 05, 2013, 08:17 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
How old is the plane?

SteveT
Latest blog entry: My hangar...
Jan 05, 2013, 08:42 PM
Honeybadger don't care...
Luv3d's Avatar
Garage sale edge from october this past year.
Jan 05, 2013, 09:06 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Perhaps Noll would do something about this???

SteveT
Latest blog entry: My hangar...
Jan 05, 2013, 10:05 PM
Honeybadger don't care...
Luv3d's Avatar
I gave them the opportunity to help, but they declined. Not sure if my message was handled by Noll or someone else.

Quote:
Originally Posted by SteveT.
Perhaps Noll would do something about this???

SteveT
Jan 06, 2013, 03:34 AM
Registered User
Quote:
Originally Posted by Luv3d
I gave them the opportunity to help, but they declined. Not sure if my message was handled by Noll or someone else.
Did you show them the picture you showed us? Thats quite clearly a wing tube failure and not your fault.
Jan 06, 2013, 05:50 AM
Registered User
Sorry to see that happen to the tube! Hopefully you'll be up in the air soon
Jan 06, 2013, 07:04 AM
Honeybadger don't care...
Luv3d's Avatar
Thanks for the well-wishes.
Jan 07, 2013, 01:22 AM
Once u go yak u never go back
marksextra's Avatar
Quote:
Originally Posted by cookci
Did you show them the picture you showed us? Thats quite clearly a wing tube failure and not your fault.
Just wondering the same thing. Dang. Even the wingtips are in tact.
Jan 07, 2013, 05:29 AM
Honeybadger don't care...
Luv3d's Avatar
Quote:
Originally Posted by cookci
Did you show them the picture you showed us? Thats quite clearly a wing tube failure and not your fault.
Quote:
Originally Posted by marksextra
Just wondering the same thing. Dang. Even the wingtips are in tact.
Yes.
Jan 07, 2013, 10:35 AM
Registered User
Rhondas's Avatar

540 edge Barn door ailerons


say I have the same model only its the 41 " version its my first real wood and balsa 3d plane, I have the foam Typhoon how ever its nothing like this baby.
I watched the flying video and its very impressive showing the hands on sticks.
T first I set it up to specs on the trows, and test flew it and stalled it on landing and had to replace the nose cowl. so I looked up other same size 540 edge models and noticed the throws and specs are 1/2 of the recommended settings on the model I have like in the video except its the 41 inch version . I'm definitely not a 3D pilot .just sport and pattern. and that's all I'm looking for in this model. OK so in a video on the same model I have the pilot comes in for a landing and says do not move your ailerons just use rudder and flare with your elevator with power slightly on ,well I Noticed in this here video the pilot did use his ailerons on landing , so my question is should I or shouldn't I use the ailerons on landing, because on all my sport planes I always had to correct almost all my landings with some aileron input?
Last edited by Rhondas; Jan 20, 2013 at 09:37 PM.
Jan 07, 2013, 11:12 AM
Honeybadger don't care...
Luv3d's Avatar
All landings with any type of crosswind or turbulent air will require minor corrections with the ailerons to keep the wings level. There are various crosswind techniques, but certainly in the flare, the ailerons must be leveled- which will require some type of input.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 60 inch edge 540 vs 48 inch extreme flight extra 300 & edge 540 vs 3dhs slick 51 & 59 CRFan1 3D Flying 40 Mar 04, 2012 02:45 PM
Sold 3DHS Omega 130g NIB 58.00 Shipped boatdoc Aircraft - Electric - Power Systems (FS/W) 9 Aug 28, 2011 09:16 AM
Discussion 3dhs edge 41" edge as second ish) plane? Mr Bloppy 3D Flying 19 Aug 25, 2010 09:43 AM
Wanted Wanted - 47" - 58" 3DHS, EF or Sebart plane paintball_kidz Aircraft - Electric - Airplanes (FS/W) 0 Jan 02, 2010 11:12 PM
Wanted 47"-58" size 3DHS, Sebart or Extreme Flight paintball_kidz Aircraft - Electric - Airplanes (FS/W) 13 Jan 02, 2010 12:52 AM