Thread Tools
Jul 29, 2012, 12:09 PM
Registered User
can someone SENDme the manual of the Plane
Sign up now
to remove ads between posts
Jul 29, 2012, 12:24 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by jmanopla
can someone SENDme the manual of the Plane
I don't believe there is one, use the manual for the 57" Extra found here, and check out all the photos in the thread by clicking on the "thread tools" tab, then the "show attachments in this thread" tab....this will point out any differences in the build of the plane. As to CG...it looks like 3.75" is the sweet spot.

SteveT
Latest blog entry: My hangar...
Jul 29, 2012, 01:34 PM
Registered User
still no manual? mine has been built for months incredible.
Jul 29, 2012, 02:08 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
None shown on the 3DHS site....

SteveT
Latest blog entry: My hangar...
Jul 29, 2012, 03:26 PM
Registered User
Quote:
Originally Posted by SteveT.
None shown on the 3DHS site....

SteveT
wow.....
Jul 29, 2012, 04:22 PM
Destructive Tester
jimmy34256's Avatar

Manual ????


Quote:
Originally Posted by jmanopla
can someone SENDme the manual of the Plane
1) Open box, take stuff out.
2) Install landing gear
3) Cut holes in fuse.
4) Install stablizer, glue hinges
5) Install rudder, glue hinges
6) Install tailwheel
7) Install wings, glue hinges
8) Install servos, control horns and arms
9) Install motor and ESC
10 Install receiver, battery and bind
11) Trim all surfaces
12) Install canopy and cowl
13) Install prop and go fly

c/g has already been covered here....
Jul 29, 2012, 04:25 PM
Registered User
Quote:
Originally Posted by jimmy34256
1) Open box, take stuff out.
2) Install landing gear
3) Cut holes in fuse.
4) Install stablizer, glue hinges
5) Install rudder, glue hinges
6) Install tailwheel
7) Install wings, glue hinges
8) Install servos, control horns and arms
9) Install motor and ESC
10 Install receiver, battery and bind
11) Trim all surfaces
12) Install canopy, cowl and fly

c/g has already been covered here....
That works well for those of us who have built a few, but for someone with limited experience a manual is would be helpful because it has pictures.
Jul 29, 2012, 05:10 PM
Registered User
nebwake's Avatar
They only use one manual for each size, use the one for the 57" extra, they will go together the same
Jul 29, 2012, 06:33 PM
Registered User
Quote:
Originally Posted by nebwake
They only use one manual for each size, use the one for the 57" extra, they will go together the same
?? 57" extra, 59" slick have there own manual, my 46" yak, 47"shp, 48" vr-1 have manuals as well, even a pdf manual that someone can print would be fine, what if somebody who doesnt use rcg wants to build there 58" edge, then they dont even have cg info to get it balanced after they figure out how to build. just my opinion.
Jul 29, 2012, 07:37 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
...
Last edited by SteveT.; Jul 29, 2012 at 08:51 PM.
Jul 29, 2012, 08:16 PM
Registered User
Thankss built its not a problem

i can built with close eyes
Jul 29, 2012, 10:23 PM
FLYINGJUNKY
eschult's Avatar
Quote:
Originally Posted by SteveT.
None shown on the 3DHS site....

SteveT
I have a manual. I am sure the person I got it from would not mind me giving out a copy. Pm me your email as its in a pdf file.
Jul 30, 2012, 08:43 AM
Registered User
SnowDog1974's Avatar
Quote:
Originally Posted by eschult
I have a manual. I am sure the person I got it from would not mind me giving out a copy. Pm me your email as its in a pdf file.
Eric,
If you did not find any glaring errors in the manual that I created, I will go ahead and send it to 3DHS for their consideration.
Let me know, thanks.
-Mike
Jul 30, 2012, 11:08 AM
FLYINGJUNKY
eschult's Avatar
It worked great for me but I have built alot of planes. I am sure a newby would have no problem following the set up. Only thing I would change is instal the control horns before you mount rudder and stab. I am a little concerned with my thrust angle. Does not see to be much but my other 3dhs birds do not have much either. Thanks again.
Jul 30, 2012, 11:15 AM
Registered User
SnowDog1974's Avatar
Quote:
Originally Posted by eschult
It worked great for me but I have built alot of planes. I am sure a newby would have no problem following the set up. Only thing I would change is instal the control horns before you mount rudder and stab. I am a little concerned with my thrust angle. Does not see to be much but my other 3dhs birds do not have much either. Thanks again.
The order of steps is the same as the 55" Edge, I did not feel it was my place to change the established installation order. Never had to worry about thrust angles on any 3DHS bird....it is always built in to the motor box.
Thanks for the feedback.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 60 inch edge 540 vs 48 inch extreme flight extra 300 & edge 540 vs 3dhs slick 51 & 59 CRFan1 3D Flying 40 Mar 04, 2012 02:45 PM
Sold 3DHS Omega 130g NIB 58.00 Shipped boatdoc Aircraft - Electric - Power Systems (FS/W) 9 Aug 28, 2011 09:16 AM
Discussion 3dhs edge 41" edge as second ish) plane? Mr Bloppy 3D Flying 19 Aug 25, 2010 09:43 AM
Wanted Wanted - 47" - 58" 3DHS, EF or Sebart plane paintball_kidz Aircraft - Electric - Airplanes (FS/W) 0 Jan 02, 2010 11:12 PM
Wanted 47"-58" size 3DHS, Sebart or Extreme Flight paintball_kidz Aircraft - Electric - Airplanes (FS/W) 13 Jan 02, 2010 12:52 AM