3DHS 58" Edge 540 - V2 - thread has extra posts!!! - ON SALE!! - extremeflightrc.com - Page 30 - RC Groups
Thread Tools
Feb 24, 2012, 05:31 PM
ADC Vinyl
Fliprob17's Avatar
Quote:
Originally Posted by zmonster97
White or black spinner?
I'd actually say white or red
Sign up now
to remove ads between posts
Feb 24, 2012, 07:29 PM
Wingman II
diggity2424's Avatar
Quote:
Originally Posted by SnowDog1974
you decide! (don't forget silver as an option)
Have to go with the Silver. But of course I'm bias because thats a pic of my 74"
Feb 24, 2012, 08:14 PM
Registered User
E-reevo's Avatar
What are some good starting settings for a Ice75 with a Hacker A40 10s?
Feb 24, 2012, 08:51 PM
Registered User
E-reevo's Avatar
Also how far are you guys overlapping your cowl on your canopy ?
Feb 24, 2012, 08:53 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by E-reevo
Also how far are you guys overlapping your cowl on your canopy ?
I like about 1/16" to 3/32" spinner gap, and that sets the canopy overlap.

SteveT
Latest blog entry: My hangar...
Feb 24, 2012, 08:59 PM
Registered User
E-reevo's Avatar
Thanks
Feb 24, 2012, 10:34 PM
ADC Vinyl
Fliprob17's Avatar
Quote:
Originally Posted by E-reevo
What are some good starting settings for a Ice75 with a Hacker A40 10s?
disable current limiting, that's the most important

generally besides that, they haven't needed much other tweaking
Feb 25, 2012, 02:41 AM
Hooked on 3DHS
lammbn's Avatar
Quote:
Originally Posted by E-reevo
Also how far are you guys overlapping your cowl on your canopy ?
I suggest mounting your motor out as far as you can and still have aprox 1/8" overlap on your canopy. this will really help with balancing for the proper CG with adding minimal weight. seems to be a trend that this plane ends up a little tail heavy.
Feb 25, 2012, 07:11 AM
Team 3DHS / Team JR
Bivens's Avatar
I agree with mounting the motor out as far as you can with a LITTLE canopy overlap....That's exactly what I did on mine.
Feb 25, 2012, 02:52 PM
Registered User
E-reevo's Avatar
What is the CG?
Thanks.
Feb 25, 2012, 02:56 PM
Team Aztech Aeromodels!
zmonster97's Avatar
Guess what I picked up at the wram show today. A new 58 edge!

For the landing gear does the flat side face to the front or to the rear?
Feb 25, 2012, 03:09 PM
Time to Fly AJ's Best!
heritageflyer's Avatar
From Joe's Website:

CG: 3.75" Back from leading Edge

Throws/Expo (Futaba)

Rate Elevator Aileron Rudder
High 50 Degrees
-66 Expo 40 Degrees
-66 Expo Max
-60 Expo

Low 25 Degrees
-30 Expo 20 Degrees
-30 Expo Max Degrees
-60 Expo
Feb 25, 2012, 03:10 PM
Registered User
E-reevo's Avatar
Thank you.
Feb 25, 2012, 04:29 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Flat side to the front...tapered from back...

SteveT
Latest blog entry: My hangar...
Feb 25, 2012, 04:46 PM
Team Aztech Aeromodels!
zmonster97's Avatar
Quote:
Originally Posted by SteveTtoooo
Flat side to the front...tapered from back...

SteveT
Thank you.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 60 inch edge 540 vs 48 inch extreme flight extra 300 & edge 540 vs 3dhs slick 51 & 59 CRFan1 3D Flying 40 Mar 04, 2012 02:45 PM
Sold 3DHS Omega 130g NIB 58.00 Shipped boatdoc Aircraft - Electric - Power Systems (FS/W) 9 Aug 28, 2011 09:16 AM
Discussion 3dhs edge 41" edge as second ish) plane? Mr Bloppy 3D Flying 19 Aug 25, 2010 09:43 AM
Wanted Wanted - 47" - 58" 3DHS, EF or Sebart plane paintball_kidz Aircraft - Electric - Airplanes (FS/W) 0 Jan 02, 2010 11:12 PM
Wanted 47"-58" size 3DHS, Sebart or Extreme Flight paintball_kidz Aircraft - Electric - Airplanes (FS/W) 13 Jan 02, 2010 12:52 AM