Thread Tools
Jan 04, 2012, 02:07 PM
↓↘→ + (punch)
theKM's Avatar
Discussion

3DHS 58" Edge 540 - V2 - thread has extra posts!!! - ON SALE!! - extremeflightrc.com


They're now shipping, so people be wanting to be chatting...


3D Hobby Shop - 58" Edge 540


This new mid-sized Edge 540 from 3DHobbyShop joins the outstanding 57-59" 3DHS lineup with hardcore 3D performance and wicked good looks. Employing the Scott Stoops aerodynamics pilots have been enjoying on the 41", 48" and 74" Edges, the 58" has the high pitch rate, super-stable harrier, super-slow knife edge, easy hover and everything you need to put on your best 3D exhibition. The straight leading edge of the main wing gives excellent resistance to tip-stalling, so the 58" Edge is easy to harrier turn in an extremely tight radius and wont bite!

The 58" Edge includes a carbon wingtube, carbon one-piece landing gear, a carbon-reinforced landing-gear attachment system, genuine ultracote, complete hardware, canopy hatch latch, aluminum axles, hinges installed in control surfaces, and all of the 3DHS quality features pilots have come to expect.

The 58" Edge is extremely flexible on power system requirements, using 4S to 6S lipo. Use qty 4 Mid-size servos with metal gears such as Hitec HS-225MG and a transmitter with dual rates and exponential. With two super-high visibility color schemes to choose from, the 58" will get you noticed at any field and deliver exactly the performance you want.




3DHS 58 EDGE 540 RADIO VIEW JOE SMITH (4 min 42 sec)













Specs
Wingspan: 58"
Wing Area: 680 Sq. Inches
Weight: 4.5-5.5 lbs.

Required Equipment

Motor:
Hacker A40-10S with 4S 3700-4400mah
Torque 4016-T500 with 5S 3200-3700mah
Torque 4016-T500 with 6S 2650-3200mah

ESC:
AirBoss 80A
Hacker X70 SBEC
Castle Ice Lite 75A

Prop:
15x7
14x7

Spinner:
63mm (2.5 inches)

Servos:
4 x Hitec HS-225MG
4 x Hitec HS-5245MG
Last edited by theKM; Sep 08, 2016 at 05:01 PM.
Sign up now
to remove ads between posts
Jan 04, 2012, 02:08 PM
Fly Low, Fly 3d, Repair Often
davebloomer's Avatar
First
Last edited by davebloomer; Jan 04, 2012 at 02:22 PM.
Jan 04, 2012, 02:08 PM
↓↘→ + (punch)
theKM's Avatar
...reserved for abuse...


edit: second apparently
Jan 04, 2012, 02:13 PM
Registered User
SnowDog1974's Avatar
subscribed...I want one...a yellow one...guess I better do my tax return soon...
Jan 04, 2012, 02:15 PM
Gone Huckin'
turnerm's Avatar
Subscribed. I think a yellow one is in my future.

Thanks Aaaron for setting this up...
Jan 04, 2012, 02:17 PM
Gone Huckin'
turnerm's Avatar
By the way - second paragraph of the description starts with "The 59" Edge..." and I'm guessing that should be 58".

It's like that on the 3DHS web page too - so I'm guessing you copied it from there. Should be corrected in both spots.
Jan 04, 2012, 02:18 PM
Fly Low, Fly 3d, Repair Often
davebloomer's Avatar
Quote:
Originally Posted by theKM
...reserved for abuse...


edit: second apparently
crud. thought i was being funny now i look like a turd. Sorry, forgot yall always save a post. If someone can tell me how to remove the post altogether i will.

Quote:
Originally Posted by turnerm
By the way - second paragraph of the description starts with "The 59" Edge..." and I'm guessing that should be 58".

It's like that on the 3DHS web page too - so I'm guessing you copied it from there. Should be corrected in both spots.
The wingspan grows an inch when you fill it at least 70% full of ink. They went ahead and accounted for that.
Jan 04, 2012, 02:19 PM
↓↘→ + (punch)
theKM's Avatar
Quote:
Originally Posted by davebloomer
crud. thought i was being funny now i look like a turd. Sorry, forgot yall always save a post.
I thought it was hilarious
Jan 04, 2012, 02:20 PM
3D Wanna Be
sk8rob's Avatar
where's the 120cc edge thread?
Jan 04, 2012, 02:23 PM
Registered User
FireyFate's Avatar
Quote:
Originally Posted by sk8rob
where's the 120cc edge thread?
And the 48" EPP Edge thread
Jan 04, 2012, 02:25 PM
↓↘→ + (punch)
theKM's Avatar
Quote:
Originally Posted by turnerm
By the way - second paragraph of the description starts with "The 59" Edge..." and I'm guessing that should be 58".

It's like that on the 3DHS web page too - so I'm guessing you copied it from there. Should be corrected in both spots.
huh? wha?... dontknowwhatyoutalkingabout...
Jan 04, 2012, 02:39 PM
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by theKM
huh? wha?... dontknowwhatyoutalkingabout...
It's magic!!!
Jan 04, 2012, 02:42 PM
Registered User
6L6Amp's Avatar
I saw Joe's yellow 58" last week. It's suuuuwwwwweeeettttt.
Jan 04, 2012, 02:44 PM
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by 6L6Amp
I saw Joe's yellow 58" last week. It's suuuuwwwwweeeettttt.
Especially the way he flies it. Geez!!

If you ever see me doing something like that with one of my planes you'll know that I've lost control...
Jan 04, 2012, 02:50 PM
TEAM HILLBILLY
Eagle34's Avatar
Maybe if I get the yellow and some nice purple vinyl for it (LSU colors) the wife wont take me to divorce court.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 60 inch edge 540 vs 48 inch extreme flight extra 300 & edge 540 vs 3dhs slick 51 & 59 CRFan1 3D Flying 40 Mar 04, 2012 02:45 PM
Sold 3DHS Omega 130g NIB 58.00 Shipped boatdoc Aircraft - Electric - Power Systems (FS/W) 9 Aug 28, 2011 09:16 AM
Discussion 3dhs edge 41" edge as second ish) plane? Mr Bloppy 3D Flying 19 Aug 25, 2010 09:43 AM
Wanted Wanted - 47" - 58" 3DHS, EF or Sebart plane paintball_kidz Aircraft - Electric - Airplanes (FS/W) 0 Jan 02, 2010 11:12 PM
Wanted 47"-58" size 3DHS, Sebart or Extreme Flight paintball_kidz Aircraft - Electric - Airplanes (FS/W) 13 Jan 02, 2010 12:52 AM