Thread Tools
Jan 06, 2012, 11:17 AM
n2kartracing
Don't go full timed like everyone with brushless does in the rc world. It won't work with the way they layout the tracks. Set it somewhere at 5 or 6. Any higher will give the kart torque steer Larc.




N2
Sign up now
to remove ads between posts
Jan 06, 2012, 02:37 PM
Registered User
djskiptonic's Avatar
You left out the point about his cells will also get to hot if he does. You forgot to tell him the important stuff N2.



JB"
Jan 06, 2012, 05:03 PM
Me Toby You?
Toby Warren's Avatar
+1




Toby
Jan 07, 2012, 07:43 PM
DoubleTrouble
If he has a card its real easy to use. Plug in play almost.



Double Trouble
Jan 08, 2012, 06:41 PM
Just_Me
Just_me's Avatar
Do you need the proper settings to start with Larc?




Just_Me
Jan 08, 2012, 06:57 PM
Registered User
larc's Avatar
Robert set up the esc so I am guessing that it has a good baseline. However, what he runs may not work speciffically for me; so if you could PM what you use that would be a great help. Have not tried adjusting the esc with the program card yet; will try in the next couple of days.

WoodyT
Jan 08, 2012, 07:23 PM
Me Toby You?
Toby Warren's Avatar
I push the limits but then I drive by the seat of my pants to. Setting your esc is very easy and can be adjusted any given time. Wish more esc had these cards.



Toby
Jan 09, 2012, 08:36 AM
Always were your sun glasses!
Leadhauler's Avatar
Quote:
Originally Posted by Toby Warren View Post
I push the limits but then I drive by the seat of my pants to. Setting your esc is very easy and can be adjusted any given time. Wish more esc had these cards.



Toby
Speaking of zero usb and program cards. In my hands is my new esc with they're new Iphone app. No more Ipad and usb for me. I still use a wire and plug but nothing like before. You'll see it at the 2012 ROAR 1/10&1/12 Electric Carpet Nats March 16th-18th. I've been using it for the last three or four races. Works wonderfully I must add. Not sure if they'll end up releasing it but it sure is sweet!



Leadhauler
Jan 09, 2012, 07:41 PM
Holding on to my SEAT!
P.ODell's Avatar
Quote:
Originally Posted by Leadhauler View Post
Speaking of zero usb and program cards. In my hands is my new esc with they're new Iphone app. No more Ipad and usb for me. I still use a wire and plug but nothing like before. You'll see it at the 2012 ROAR 1/10&1/12 Electric Carpet Nats March 16th-18th. I've been using it for the last three or four races. Works wonderfully I must add. Not sure if they'll end up releasing it but it sure is sweet!



Leadhauler
The question I always ask my sponsors is "may I keep it?" Ask them before you get all wild up Lead
Jan 09, 2012, 09:15 PM
Registered User
Quote:
Originally Posted by Leadhauler View Post
Speaking of zero usb and program cards. In my hands is my new esc with they're new Iphone app. No more Ipad and usb for me. I still use a wire and plug but nothing like before. You'll see it at the 2012 ROAR 1/10&1/12 Electric Carpet Nats March 16th-18th. I've been using it for the last three or four races. Works wonderfully I must add. Not sure if they'll end up releasing it but it sure is sweet!



Leadhauler
Who makes it?




Trek
Jan 10, 2012, 10:39 AM
Cakeman

ATTN Larc


I was in my local HS and ran across a wing mount like mine. I snagged one for you. Yesterday I dropped in the mail to Robert and Todd. Todd said he had your address and he'll forward it on to you. If you need help mounting it drop me a PM or post. Your holes on your old wing will not match. They can be covered up by a sticker or do as I did buy another wing with no holes? No need to pay me back. I'll let you buy me a soda or fries at a race.



Cakeman
Jan 11, 2012, 09:29 AM
Registered User
Quote:
Originally Posted by cakeman View Post
I was in my local HS and ran across a wing mount like mine. I snagged one for you. Yesterday I dropped in the mail to Robert and Todd. Todd said he had your address and he'll forward it on to you. If you need help mounting it drop me a PM or post. Your holes on your old wing will not match. They can be covered up by a sticker or do as I did buy another wing with no holes? No need to pay me back. I'll let you buy me a soda or fries at a race.



Cakeman

I'm not much for advice but you know he could use a flat plastic bar the length of his existing holes then put the old wing mounts into the bar. He won't be needing the wing rods anyways. When he finishes the bar and wing then drill out the new hole pattern on the bar he made. Place the wing mounted on the bar on to the new wing mount. It would be the ticket I think without buying another wing. Sounds confusing but hopefullt he gets the idea.
Jan 11, 2012, 01:23 PM
Team Edge
Team Edge RC's Avatar
Quote:
Originally Posted by cakeman View Post
I was in my local HS and ran across a wing mount like mine. I snagged one for you. Yesterday I dropped in the mail to Robert and Todd. Todd said he had your address and he'll forward it on to you. If you need help mounting it drop me a PM or post. Your holes on your old wing will not match. They can be covered up by a sticker or do as I did buy another wing with no holes? No need to pay me back. I'll let you buy me a soda or fries at a race.



Cakeman
Cake I do hope you talked to Todd or Sandy prior to shipping the mounts. Todd came back for a day but back down in MS again. He and his girlfriend are prob sitting on the beach freezing ROLF.



Robert
Jan 11, 2012, 01:25 PM
Cakeman
Robert you still on? I spoke to Todd. Hes ok with it all. Thanks and hope your move went well.




Cakeman
Jan 12, 2012, 12:39 PM
Team Edge
Team Edge RC's Avatar
Quote:
Originally Posted by cakeman View Post
Robert you still on? I spoke to Todd. Hes ok with it all. Thanks and hope your move went well.




Cakeman


No worries with you shipping to us. I'm just gald you called before doing it. If you didn't I'd have a new wing mount to use or sell ROLF.




Robert


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Brushless Go kart HKing abletowinginc Car Talk 3 Jun 23, 2011 12:01 PM
Idea Dock Kart zorrow Dock Talk 7 Mar 09, 2011 08:10 PM
Discussion OT: Great video of the 1/10 scale Cross Fire Kart RC Kart Akura2 Motorcycles 12 Feb 18, 2010 12:17 AM