Xaircraft Hexa Frame - RC Groups
Thread Tools
Jan 03, 2012, 01:35 PM
Registered User

Xaircraft Hexa Frame

What do you think of Xaircraft Hexa Frame Fiber glass plus plastic version – 106 USD. Is it durable (especially legs)? Is 1 kg payload possible?

As I understand, you can easily go from Hexa to Quad and back (just need to buy some plates).
Sign up now
to remove ads between posts
Jan 04, 2012, 03:03 PM
Registered User
Any review on this?
Jan 09, 2012, 12:06 PM
Registered User
Interested too...
Jan 09, 2012, 12:16 PM
Registered User
just in case here is couple of dollars more expensive, but free shipping: http://www.goodluckbuy.com/xaircraft...er-flight.html
Jan 10, 2012, 09:08 PM
Registered User
sg1anubis's Avatar
I posted some info for this frame on my website. Yes, the arms are very durable and I like the over-sized landing skids. I don't know how much it can lift but I would imagine it is dependent on your motor and prop combination and not the strength of the frame. I purchased my frame from cnchobbyhelicopter but goodluckbuy is now carrying them as well along with plenty of inexpensive replacement parts with free shipping. I would say the fiberglass plates are more than strong enough, however, the fiberglass pipes for the base of the landing skids have a very thin wall and developed fractures from snapping them in. Instead I replaced them with a dowel rod which has worked just fine. The actual legs of the skids are very shock absorbent and somewhat flexible. Both the legs and loading pipes are mounted with vibration dampening o-rings inside of an aluminum bracket that attaches to the bottom of the main frame.

More pictures and information here:
Jan 10, 2012, 09:16 PM
Suspended Account
This is what I'll get to transfer over my gear from an x650v8, and keep the 2 spare ESC and motors as parts. When I get the AHRSv2 and FC1212-P delivered (and working) I'll set up with this hexa. I may even get the NAZA for it, as Im hearing whispers that there's GPS coming to that (compass at least will be good).
I'd like to know/see more on this hexa.
Jan 11, 2012, 12:02 AM
Registered User
it has the same size as V650 with two more arms which makes it to hover better than quad with some wind
Jan 11, 2012, 12:34 AM
Go Hawks!
cryhavoc38's Avatar
I've been looking at that CF XA hexa frame.
Looks great
Jan 12, 2012, 07:18 AM
Registered User
Jodde73's Avatar
Whats the mtm distance?
Feb 08, 2012, 06:26 AM
Registered User
The same question: what is the m2m? What is the maximum size of props that can be used?
Feb 08, 2012, 06:41 AM
Suspended Account
Originally Posted by icah
The same question: what is the m2m? What is the maximum size of props that can be used?
You cannot use bigger than 10 inch props. Mine has 10mm spare between props.
Feb 08, 2012, 01:54 PM
Registered User
I have this frame now. I want to use it for Y6 configuration. Frame is litle heavy, but good.
Feb 08, 2012, 08:32 PM
Multirotor Builder!!!!!
Hey guys check out my blog. I have the hexa frame and I am using the NAZA on it, flys very nice and built well.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted Quad and/or Hexa frame - MK frame / Flexlander beeker_12 Aircraft - Electric - Helis (FS/W) 1 Feb 18, 2011 08:04 PM
Discussion Hexa frame template Zirt57 Multirotor Drone Talk 0 Dec 06, 2010 11:20 PM
Discussion Folding frame for AP - tri, quad, Hexa, Okto danielpetrescu Multirotor Drone Talk 9 May 10, 2010 01:25 AM