Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Feb 17, 2013, 06:06 AM
Bearded Flyer is offline
Find More Posts by Bearded Flyer
Registered User
Thanks for the info Patricklupo. I have only recently finished installing the Rabbit in the new frame,with new motors and have only flown it indoors at present (without the GPS).

Nebstress - I have read ALL the posts (do I get a medal for it? ) but it made my brain hurt as there appeared to be conflicting information and most were not relating to the latest firmware. It is nice to get some recent 'real world' experiences before I fly it outside.

Richard
p.s. no offence taken
Sign up now
to remove ads between posts
Old Feb 17, 2013, 07:01 AM
nebstress is offline
Find More Posts by nebstress
Advanced Monkey
nebstress's Avatar
Quote:
Originally Posted by Bearded Flyer View Post
Nebstress - I have read ALL the posts (do I get a medal for it? ) but it made my brain hurt as there appeared to be conflicting information and most were not relating to the latest firmware. It is nice to get some recent 'real world' experiences before I fly it outside.

Richard
p.s. no offence taken
No offense meant Richard & yes I think you do deserve a medal for reading through the whole of this thread:



& maybe some aspirin too
Old Feb 18, 2013, 12:27 PM
CapBlack is offline
Find More Posts by CapBlack
Registered User
Hello nebstress, I think as we await news from China, could order a OPEN PILOT , the question is they have 2 models CC3D, and REVOLUTION, the model revo seems more appropriate, you think the same?
Old Feb 18, 2013, 12:53 PM
nebstress is offline
Find More Posts by nebstress
Advanced Monkey
nebstress's Avatar
Quote:
Originally Posted by CapBlack View Post
Hello nebstress, I think as we await news from China, could order a OPEN PILOT , the question is they have 2 models CC3D, and REVOLUTION, the model revo seems more appropriate, you think the same?
It depends what you want & how long you are prepared to wait, the REVO will be great when the firmware is finished & OP do a general release but that wont be for a while.
As I am sure you have worked out already the CC3D doesn't have GPS functions or Baro & Compass so is just a basic real flyers FC. The REVO will have all the functions the Rabbit does plus eventually Waypoint, full AP, etc.

Unfortunately OP don't (& wont) have any CC3D's for sale either but you can get a Drotek CC3D, basically exactly the same, uses the same firmware & GCS just not supported by OP.
Old Feb 18, 2013, 02:15 PM
CapBlack is offline
Find More Posts by CapBlack
Registered User
I understand, I really wanted something more like the rabbit, so I was inclined to the revo and am interested in having open software
Old Feb 18, 2013, 03:15 PM
Soupbones is offline
Find More Posts by Soupbones
Registered User
Soupbones's Avatar
Quote:
Originally Posted by nebstress View Post
It depends what you want & how long you are prepared to wait, the REVO will be great when the firmware is finished & OP do a general release but that wont be for a while.
As I am sure you have worked out already the CC3D doesn't have GPS functions or Baro & Compass so is just a basic real flyers FC. The REVO will have all the functions the Rabbit does plus eventually Waypoint, full AP, etc.

Unfortunately OP don't (& wont) have any CC3D's for sale either but you can get a Drotek CC3D, basically exactly the same, uses the same firmware & GCS just not supported by OP.
Actually while not directly supported by OP hardware wise, the Dortek CC3D is approved by OP. The hardware is supported by the manufacturer, which is this case is Dortek, but the firmware is all OP and approved for use on this clone board by the OP people.
Old Feb 19, 2013, 04:44 AM
nebstress is offline
Find More Posts by nebstress
Advanced Monkey
nebstress's Avatar
Quote:
Originally Posted by Soupbones View Post
Actually while not directly supported by OP hardware wise, the Dortek CC3D is approved by OP. The hardware is supported by the manufacturer, which is this case is Dortek, but the firmware is all OP and approved for use on this clone board by the OP people.
I guess that's why on the Drotek site it states:

Quote:
Those boards are not genuine CC3D, they are produced by Drotek with Openpilot team agreement.


Though there does seem to have been quite a few issues with some of the Drotek CC3D's the support from Jerome at Drotek is reportedly very good.
Old Feb 19, 2013, 04:47 AM
nebstress is offline
Find More Posts by nebstress
Advanced Monkey
nebstress's Avatar
Anyway, China is getting back to work after the New Year Celebrations & I think its time this thread got back on topic
Old Feb 19, 2013, 01:56 PM
CapBlack is offline
Find More Posts by CapBlack
Registered User
Quote:
Originally Posted by nebstress View Post
Anyway, China is getting back to work after the New Year Celebrations & I think its time this thread got back on topic
Yes I agree,to begin Ican could say, here we are bla bla bla .....
Old Feb 22, 2013, 12:42 PM
birrozza is online now
Find More Posts by birrozza
Registered User

Datalink wirless for Rabbit FC


Hello.
Is There a wireless data link that you can attach to the USB port of the Rabbit, so you can keep under control the parameters during the flight?
If there is, it is technically possible?
Thanks


--------------------------------------
G.A.T.
Gruppo Aeromodellistico Tarantino (Italy)
www.gat-taranto.org
Old Feb 22, 2013, 02:08 PM
CapBlack is offline
Find More Posts by CapBlack
Registered User
[QUOTE=birrozza;24216127]Hello.
Is There a wireless data link that you can attach to the USB port of the Rabbit, so you can keep under control the parameters during the flight?
If there is, it is technically possible?
Thanks


there is not, you would have to connect a host and is expensive and complicated software, but at some point I thought about hanging a controller to pins 3 & 4 of the CH340 usb controller, but also the work put into the software will not be easy, LF team could do this as fast , for example to pass data to one or remzibi minimosd osd etc etc
Old Feb 23, 2013, 12:28 AM
CapBlack is offline
Find More Posts by CapBlack
Registered User
at least I found this, http://www.aliexpress.com/wholesale/...ontroller.html
Old Feb 23, 2013, 04:59 AM
nebstress is offline
Find More Posts by nebstress
Advanced Monkey
nebstress's Avatar
Quote:
Originally Posted by CapBlack View Post
No LoveFlight though
Old Feb 23, 2013, 09:23 AM
CapBlack is offline
Find More Posts by CapBlack
Registered User
Quote:
Originally Posted by nebstress View Post
No LoveFlight though
yes, strange that silence of Love Flight team
Old Feb 23, 2013, 09:29 AM
nebstress is offline
Find More Posts by nebstress
Advanced Monkey
nebstress's Avatar
Quote:
Originally Posted by CapBlack View Post
yes, strange that silence of Love Flight team
I don't think it's that strange, as far as they are concerned the Rabbit does everything they wanted it to so they have achieved there goal.
Maybe they are working on something new, a 'fox' to chase the Rabbit away.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Multicopter Flight Controller Comparison Chart mbsteed Multirotor Talk 27 Jun 13, 2015 10:41 AM
Discussion Free Flight FF Auto Balance Controller with 3D Acceleration Sensor For QuadCopter C team MOD Multirotor Electronics 5803 Jun 26, 2014 06:40 PM
Discussion New quadcopter frame only (compatible with KK/MK MultiCopter Controller ) udoor Multirotor Talk 23 Aug 07, 2011 01:05 PM
Sold FY90Q Flight Controller for Quadcopter - $70 shipped jpsabo Aircraft - Electric - Multirotor (FS/W) 1 Jul 29, 2011 11:21 AM
For Sale Complete MultiWii Quadcopter Flight Controller Kit madushan2008 Aircraft - Electric - Multirotor (FS/W) 7 Jul 26, 2011 09:58 AM