Originally Posted by nebstress

400 but you could use 500 if you want.

500HZ? Are you sure? did you try it?

I think they wont run and beep, let me know....

And people who thought like a rabbit connect http://rctimer.com/index.php?gOo=goo...34&productname = this thing here, because all the data had to go gui.

Originally Posted by apejovic

500HZ? Are you sure? did you try it?

I think they wont run and beep, let me know....

Yes I'm sure, yes I use at 500Hz!

Originally Posted by nebstress

Yes I'm sure, yes I use at 500Hz!

400 and 500 is the difference?

Originally Posted by ua6jhm

400 and 500 is the difference?

About 100Hz

6. 500Hz (2ms ESC_Special) I use 500 Hz for regulators x-450 xaircraft. This is a special controller, they nother mode. Up the topic of them said. Interesting I'll check how it will work on firmware Simonk.

It seems time has passed rabbit, new flight controllers and the rabbit is at a price inferior to them. I hope the developers are surprised us something new but it seems their interest waned.

Hello
Can someone explain me how function the new feature implemented in firmware 1.230 about gimbal (knob vs stick)?
Thanks

-------------------------------------------
G.A.T.
Gruppo Aeromodellistico Tarantino
www.gat-taranto.org

ESC with Simonk fw is better than stock turnigy plush 30A?
If yes, how do i feel this? More stable?
In fact, i'm satisfied with plush's, just interested if it can be better?

Originally Posted by vili

ESC with Simonk fw is better than stock turnigy plush 30A?
If yes, how do i feel this? More stable?
In fact, i'm satisfied with plush's, just interested if it can be better?

Yes, SimonK flashed ESC's are better, they react much faster so make a copter more stable & agile.

TGY Plush ESC's can not be flashed with SimonK firmware, only ESC's with atmega chip.

thx
what is the cheapest (but reliable) esc with factory simonk fw uploaded?

Anyway i can use my plush's at 400hz. Is it not fast enough?
Or are there some other factors which determine the reaction time?

Originally Posted by vili

thx
what is the cheapest (but reliable) esc with factory simonk fw uploaded?

Anyway i can use my plush's at 400hz. Is it not fast enough?
Or are there some other factors which determine the reaction time?

I don't know, I flash my own.

Other factors!

Originally Posted by birrozza

Hello
Can someone explain me how function the new feature implemented in firmware 1.230 about gimbal (knob vs stick)?
Thanks

-------------------------------------------
G.A.T.
Gruppo Aeromodellistico Tarantino
www.gat-taranto.org

ciao,da quanto ho capito serve per usare la rabbit ad uso esclusivo gimbal
come scheda aggiuntiva ad altri sistemi di stabilizzazione quindi abbinata ad un altra radio con ricevente in modo che un secondo operatore si gestisce la parte riprese.
un saluto francesco

Originally Posted by unifrancesco

ciao,da quanto ho capito serve per usare la rabbit ad uso esclusivo gimbal
come scheda aggiuntiva ad altri sistemi di stabilizzazione quindi abbinata ad un altra radio con ricevente in modo che un secondo operatore si gestisce la parte riprese.
un saluto francesco

Wow my dyslexia must be getting really bad cos I don't understand a word of that

Hello
Unifracesco says that the options stick mod & knob mod, selectable in gimbal setup (1,230 gui) are valid only if the card is used only for controlling a gimbal.
Thanks

-------------------------------------------
G.A.T.
Gruppo Aeromodellistico Tarantino
www.gat-taranto.org

Originally Posted by unifrancesco

ciao,da quanto ho capito serve per usare la rabbit ad uso esclusivo gimbal
come scheda aggiuntiva ad altri sistemi di stabilizzazione quindi abbinata ad un altra radio con ricevente in modo che un secondo operatore si gestisce la parte riprese.
un saluto francesco