Thread Tools
Oct 15, 2012, 02:28 PM
Registered User
Yosegon's Avatar
Fine, but the inexplicable is that the rabbit FC beeps and servos move suddenly. It seems that the board ordered that movement to the servos.
Sign up now
to remove ads between posts
Oct 15, 2012, 03:41 PM
Registered User
dc9guy's Avatar
Quote:
Originally Posted by rizalbautista View Post
Change your servo, the pot on your servo is almost done (worn out or bad quality) i also experience this with my emax servo before i change it and wolla... glitch gone.....
My servo is brand spanking new. Still twitches around every 5 secs. It is timed perfect.
Oct 15, 2012, 05:24 PM
Registered User
Quote:
Originally Posted by dc9guy View Post
My servo is brand spanking new. Still twitches around every 5 secs. It is timed perfect.
Well if thats the case, i think thats a FW issue....or maybe your FC

In my case im using my old standard JR and Futaba servo for the pitch and roll with refresh rate of 50hz. no problem whatsoever in all my FW installed.

By the way i experience this glitch with a brandnew emax servo also. but in my case, its only during start-up of the FC after a while it will be gone.

It doesn't mean if its brand new its already good. "Compatibility" issue and there is this thing called "factory defect"
Last edited by rizalbautista; Oct 15, 2012 at 07:44 PM. Reason: add more info
Oct 15, 2012, 06:00 PM
Registered User

Question on Surgin motors low altitude


Have an x8 and flies great with the Rabbit, High prec Baro. However, I am flying over grass and until I get it up there several feet, I do get surging from the motors and altitude changes. I do have foam over the baro. Any suggestions would be helpful. Thanks rkenosha
Oct 15, 2012, 06:40 PM
Registered User
Quadframes's Avatar
Ok decided to update my rabbit with the latest software and all ok until I check the GPS Latitude & Longitude and its WAY OFF according to the GPS I am in the north sea and yes I have put in my Magnetic declination
Oct 15, 2012, 07:03 PM
making crashing a lifestyle!
dutchcommando's Avatar
Quote:
Originally Posted by rkenosha View Post
Have an x8 and flies great with the Rabbit, High prec Baro. However, I am flying over grass and until I get it up there several feet, I do get surging from the motors and altitude changes. I do have foam over the baro. Any suggestions would be helpful. Thanks rkenosha
do you have sonar?
Oct 15, 2012, 07:36 PM
Uavrotorking.com's Avatar
we sell these new heavy duty High Amp power systems again these are only use for the heavy lift systems and they have a burst amperage of over 400 amps we are still waiting for more test to see if we can push it to 500 amps we are just waiting for the new tester to come in. here are some videos of what we sell at UavRotorKing.com
Last edited by Uavrotorking.com; Nov 21, 2012 at 11:43 PM.
Oct 15, 2012, 10:47 PM
Registered User
Yes, I do have the sonar. rkenosha
Oct 16, 2012, 02:55 AM
Registered User
Quote:
Originally Posted by rkenosha View Post
Yes, I do have the sonar. rkenosha
Flying over grass and sonar isn't good, the sonar was bad reflected from the grass (shorter grass is better, long grass impact the ultrasonic).
Oct 16, 2012, 03:53 AM
Registered User
Carlotriton's Avatar
Hello
After the checks that you suggested my FC is dead.
I tried to contact the shop http://www.aliexpress.com/store/611060 but no response.
Who makes this FC Rabbit?
There is no direct contact with the manufacturer.
It is therefore correct the behavior of this shop?

thanks
Carlo
Oct 16, 2012, 03:55 AM
Advanced Monkey
nebstress's Avatar
Quote:
Originally Posted by Carlotriton View Post
Hello
After the checks that you suggested my FC is dead.
I tried to contact the shop http://www.aliexpress.com/store/611060 but no response.
Who makes this FC Rabbit?
There is no direct contact with the manufacturer.
It is therefore correct the behavior of this shop?

thanks
Carlo
The Aliexpress Store is run by "Love Flight", Love Flight are the manufacturer.
Oct 16, 2012, 04:01 AM
Registered User
Carlotriton's Avatar
Quote:
Originally Posted by nebstress View Post
The Aliexpress Store is run by "Love Flight", Love Flight are the manufacturer.
So why do not respond to a request for malfunction of FC.
Carlo
Oct 16, 2012, 04:04 AM
Advanced Monkey
nebstress's Avatar
Quote:
Originally Posted by Carlotriton View Post
So why do not respond to a request for malfunction of FC.
Carlo
I don't know but they not speak good English, try contacting "ican" here on RCG & ask for help.
Oct 16, 2012, 04:09 AM
Registered User
Carlotriton's Avatar
Quote:
Originally Posted by nebstress View Post
I don't know but they not speak good English, try contacting "ican" here on RCG & ask for help.
Ok
okay then I let you know how it goes
thanks
Carlo
Oct 16, 2012, 07:06 AM
Registered User
Quote:
Originally Posted by Quadframes View Post
Ok decided to update my rabbit with the latest software and all ok until I check the GPS Latitude & Longitude and its WAY OFF according to the GPS I am in the north sea and yes I have put in my Magnetic declination
Well what ever you do dont select go home LOL.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Multicopter Flight Controller Comparison Chart mbsteed Multirotor Drone Talk 27 Jun 13, 2015 09:41 AM
Discussion Free Flight FF Auto Balance Controller with 3D Acceleration Sensor For QuadCopter C team MOD Multirotor Drone Electronics 5803 Jun 26, 2014 05:40 PM
Discussion New quadcopter frame only (compatible with KK/MK MultiCopter Controller ) udoor Multirotor Drone Talk 23 Aug 07, 2011 12:05 PM
Sold FY90Q Flight Controller for Quadcopter - $70 shipped jpsabo Aircraft - Electric - Multirotor (FS/W) 1 Jul 29, 2011 10:21 AM
For Sale Complete MultiWii Quadcopter Flight Controller Kit madushan2008 Aircraft - Electric - Multirotor (FS/W) 7 Jul 26, 2011 08:58 AM