Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Dec 11, 2012, 08:37 PM
RICH S is offline
Find More Posts by RICH S
Registered User
Quote:
Originally Posted by jdr00ejr View Post
Been looking at the little QR-1, but don't have the funds yet. I love my MQX and am not sure I'd mess with the QR-1 enough. I guess I could fly it inside maybe when I can't fly the MQX outside. Can't imagine keeping track of that QR-1 outside, I have a hard enough time keeping orientation on the MQX.
I know what you mean, the MQX seems like a giant after zipping that QR 1 around A 20 ft box of airspace and you can track it pretty good, or go up high directly above you and it's not that bad, but it is small for how fast it is. The QR1 stays "put" way better, and to me, doesn't fall off the the MQX. Seems like all of these manufacturers need to take a tip from heli's, and paint these brighter colors for orientation
Sign up now
to remove ads between posts
Old Dec 11, 2012, 09:10 PM
shahram72 is offline
Find More Posts by shahram72
Registered User
I asked and Aaron Quin came through. Here is nice MQX canopy for the P799 clone for $2.20 shipped from banggood.com. I just ordered 2!

http://www.banggood.com/Wholesale-P7...y-p-58297.html
Old Dec 11, 2012, 11:21 PM
ChopperJack is offline
Find More Posts by ChopperJack
Moving Parts
ChopperJack's Avatar
I painted mine with orange paint so I could tell where the back is and works great so far.

I turned AILE, RUD, and ELEV D/R down to 85 per cent so it wouldn't be so frisky.
Old Dec 12, 2012, 12:01 AM
Jake8131 is offline
Find More Posts by Jake8131
Jake From Planet Mascoutah, IL
Jake8131's Avatar
Quote:
Originally Posted by RICH S View Post
Had the QR 1 first, the QX seems like a lightly wing loaded slowflyer airplane, and is nice. The little QR 1 stabilization system seems a lot more locked in. These are fun
My MQX and SQ-1.

Old Dec 12, 2012, 12:07 AM
vlad_vy is online now
Find More Posts by vlad_vy
Registered User
It's not documenting, but it's really working.

mQX throttle calibration:

Set throttle channel travel = 100%, then bind mQX, disconnect flight battery, set maximum throttle at Tx, connect flight battery, after binding lower throttle to minimum.
Old Dec 12, 2012, 12:10 AM
Jake8131 is offline
Find More Posts by Jake8131
Jake From Planet Mascoutah, IL
Jake8131's Avatar
Quote:
Originally Posted by vlad_vy View Post
It's not documenting, but it's really working.

mQX throttle calibration:

Set throttle channel travel = 100%, then bind mQX, disconnect flight battery, set maximum throttle at Tx, connect flight battery, after binding lower throttle to minimum.
And what does this accomplish?
Old Dec 12, 2012, 12:36 AM
vlad_vy is online now
Find More Posts by vlad_vy
Registered User
If you have overload and shutdown at full throttle this can help. Possible your throttle channel has too much travel than mQX expect.
Old Dec 12, 2012, 10:45 AM
nforbesrc99 is offline
Find More Posts by nforbesrc99
Jet guy w/ no money to buy jet
nforbesrc99's Avatar
Gonna order mine after X-Mas
Old Dec 12, 2012, 06:35 PM
ManiZ is offline
Find More Posts by ManiZ
Noob
ManiZ's Avatar
I have been flying mine for a week and wow, what a blast this thing is! Almost all of my flying has been indoors so far. Our living room blends into the kitchen and has a cathedral ceiling so there is plenty of room to fly. Had a few crashes in the beginning but this thing has been indestructible.

My only experience prior to this was with Syma S107 but naturally 3-channel training does nothing to help in the 4-channel world. It took me many MQX flights to "relearn" the controls.

I was using noob settings from a YouTube tutorial for DX6i+MQX but ditched them after a day as they make it impossible to get the MQX under control if you get it moving too quickly. Now I fly in acro mode with all controls at 100% and love it.

I consider myself an "advanced noob" with it; i.e. I still cannot control it well when its flying towards me, and I have not attempted stunts, but with its back to me, I can make it do just about anything indoors and not crash. What a blast!
Old Dec 12, 2012, 07:24 PM
jdr00ejr is offline
Find More Posts by jdr00ejr
Registered User
Woot....just scored a 2nd BNF MQX for $50. Wish I had got it before ordering a new board, motors, blades for my existing one. Oh well.

New board arrived, installed, all motors are spinning. I'm really nervous to try and fly it though. I'd hate for a motor to give out in flight again and I come crashing down. :-/ All motors spin up to speed at the same time. Maybe my old one had board issues before the crash and the motors are okay? Thoughts?

Maybe I'll get brave enough to fly over grass tomorrow and hope I don't come crashing down. Not sure if I'll keep the second one, sell the second one, hybrid the 2nd one - or what.

EDITED TO ADD (instead of back to back post): Okay, couldn't stand it any longer. Procturing an IT System Test at work - needed a mental break for me and the team - the MQX Flies! No sign of motor issues, but very mild, indoor flying and only 3 minutes. I'll take it outdoors tomorrow at lunch and really give it a go.
Last edited by jdr00ejr; Dec 12, 2012 at 07:40 PM.
Old Dec 12, 2012, 08:25 PM
RICH S is offline
Find More Posts by RICH S
Registered User

Color ?


That silver just did not cut it outside, anyone else do a paint scheme on your MQX, makes orientation way easier up high
Last edited by RICH S; Jun 16, 2014 at 07:29 PM.
Old Dec 12, 2012, 11:32 PM
ChopperJack is offline
Find More Posts by ChopperJack
Moving Parts
ChopperJack's Avatar
Quote:
Originally Posted by RICH S View Post
That silver just did not cut it outside, anyone else do a paint scheme on your MQX, makes orientation way easier up high
Maybe this??

https://www.rcgroups.com/forums/show...postcount=6486
Old Dec 13, 2012, 01:05 AM
airpower is offline
Find More Posts by airpower
Have fun
airpower's Avatar
I painted red stripes on my RF prop, and blue stripes on my LF prop, love it.
Old Dec 13, 2012, 01:12 AM
ChrisJ800 is offline
Find More Posts by ChrisJ800
Tassie Electric, Heli, Glider
ChrisJ800's Avatar
Im too conventional. Needs to be red on port props and green on starboard!
Old Dec 13, 2012, 01:15 AM
airpower is offline
Find More Posts by airpower
Have fun
airpower's Avatar
Tbh, youre right, im actually getting new props tomorrow and i just got new sharpies, Il make sure its red on port and green on starboardl


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold BNF PZ J3 Cub, BNF PZ P-51D Mustang, Blade mSR RTF & DX6i nyaaah!! Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 11 Oct 06, 2011 12:21 PM
For Sale New Blade 400 RTF Will sell as BNF papower Aircraft - Electric - Helis (FS/W) 8 Aug 04, 2011 01:28 PM
Sold ON HOLD....FS/WTT Like New (RTF) Heli-Max AXE CPv3 For Like New (BNF) Blade mCP X ABADGTP Aircraft - Electric - Helis (FS/W) 0 Jul 26, 2011 08:22 PM
Sold Blade MCX2 Like New RTF or BNF tamiyafan1975 Aircraft - Electric - Helis (FS/W) 1 Jul 14, 2011 04:39 PM
Sold Blade mCPX RTF or BNF (factory sealed new in box) PatternFlyer Aircraft - Electric - Helis (FS/W) 5 Mar 28, 2011 04:25 PM