Blade 450 3D as Christmas Present. - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Dec 27, 2011, 03:43 PM
Registered User

Blade 450 3D as Christmas Present.

My loving wife bought me a blade 450 3d RTF with the Dx6i for Christmas...
She bought it from the LHS where I've always shopped as she had witnessed me drooling over it before...
I've been flying helis for 1 year.
It started with the cpx, then the cx2(which has undergone a facelift with upgraded parts) then the 120sr.
I've mastered all of them, and the 120sr being the most advanced, I can fly it indoors in a 4'x4' space and outside at full tilt and can go through 3 batteries in the wind without a crash or a hard landing.
I'm getting familiar with the radio, I've binded all the other heli's to it, but im still apprehensive about spinning up the 450.
Any tips on what I should do first? I plan on inspecting the beast this week and make sure all is right according to the manual and verify the controls are set properly on the radio.
Should I consider a simulator?
Sign up now
to remove ads between posts
Dec 27, 2011, 03:49 PM
sp00fman's Avatar
Hey, congrats!

A training gear is a nice idea for the first hovers...
To drill in inverted flight orientations, a sim would be the cheapest option
Dec 27, 2011, 03:53 PM
Registered User
Thanks... I was extremely suprised.

For now, I'm just looking to hover, recover, recharge and repeat. LOL.
Dec 27, 2011, 04:19 PM
Registered User
To get used to the controls a bit you can do radds, keep in mind that the 450 will respond to input much faster than your previous helis so I'd suggest some expo on the cyclic.
Dec 27, 2011, 04:30 PM
Registered User
powerstroke01's Avatar
Congrats! Thats quite a gift!
Jan 09, 2012, 04:41 PM
Registered User
I spent some time with the 450 this weekend, I checked everything over, confirmed the controls and started off with spinning it up and getting used to it. Definitley a game changer.
So far I've only gotten a feel for the input, which is a whole heap more sensetive than what I'm used to. Also, controlling blade pitch is something that will take some time as well. I went through three batteries just keeping it light on the skids and keeping the tail at 6 o'clock. After seeing how tipsy it gets when in flight mode, I'm thinking I will probably try training gear until I get used to it.
Jan 10, 2012, 12:05 AM
Registered User
I started my CP helis with a blade 450. Training gear will be great for hovering practice. Practice hovering in all orientations. Tail in, nose in, and side in. You can try tilting it to 45 degrees before trying a full 90 degree side in. I found that once I progressed from hovering to forward flight, I did not like the training gear. It threw the weight off just enough to make it not easy. Once I progressed to forward flight I removed the training gear. In all honesty once you progress to forward flight, the training gear is not really going to save you in a crash. Another indicator that you can remove the training gear is once you can repeatedly land the heli without any movement other than straight down.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Official Blade 450 3D owners and support thread KYlawyer Mini Helis 293 Jun 02, 2014 03:36 AM
Alert Applebee’s is offering an early Christmas present to its employees. Kcal Life, The Universe, and Politics 193 Jan 19, 2012 05:43 AM
Question Christmas Present for Me flyingflipper Multirotor Drone Talk 11 Nov 22, 2011 04:42 PM
Sold FS/T Blade 400 3d, Blade CP, HDX 450 Hegemone Aircraft - Electric - Helis (FS/W) 2 Apr 10, 2011 10:38 PM