New Dyne-O-Mite 1M DLG - Page 6 - RC Groups
Thread Tools
Feb 28, 2012, 09:48 PM
sailplane nut
How are the Dyne-O-Mites coming along? I just finished up a set of plans for a mini dlg (600mm span) which uses the parkzone receiver/servo modules from wrecked um models. It looks like I may be able to hit an all-up-weight of around 1 oz. Anyone interested can e-mail me $2.50 for the plans and I have no idea of what a kit would cost-probably about 40.00 including foam wings with some type of cf stiffening, a cf tailboom and pre-cut balsa tail,rudder, and mounts for the wing and tail with a 2 piece clamshell type blue foam pod possibly coated with styrospray which is a water based plastic coating. We will see. Anyways let me know how the finished models fly. Bob M.
Sign up now
to remove ads between posts
Mar 10, 2012, 09:09 PM
Registered User
twister782's Avatar
couple of questions... is the wood already glued to the foam wing? I am looking for a DLG. this one caught my eye. is there any videos of this plane flying?
Mar 23, 2012, 10:02 PM
No, you can't fly it.
SwissBoy's Avatar
Well, that was short-lived.

Did the maiden today, had a bad launch couple with my elevator binding up on me...straight in. Not gonna lie, balsa isn't as tough as I thought! haha. Just damaged (destroyed) the fuse, splintered.

Can I just get a fuse?? But, the tail is pretty much permanently mounted to it, not sure how to get it separated.
Apr 03, 2012, 07:49 PM
sailplane nut
Hi Swissboy from Bob M . I could fix you up with a replacement fuselage when I get some in from my laser cutter. Did you glass your pod? I stuck my prototype in the ground several times without any damage but nothing is indestructable. I had planned on having Skip Miller Models handle my kits at Toledo but they don't think the tailboom is big enough and they don't like the tail mounting system so they won't take them to sell. That's ok as I have other people looking at handling them and I have no trouble selling them myself. I will be offering a larger tailboom in the future and will include an alternate tail mount at no extra charge although no one has complained yet about the existing ones. keep in touch bob M... Also, I will be soon releasing a 2Meter ship similar to the dyne-o-mite and it is in the prototype stage right now. I will keep everyone posted. Has anyone taken any in-flite photos yet so I can get some feedback on how it handles in other peoples hands?
Apr 03, 2012, 07:53 PM
sailplane nut
If you didn"t break the tailboom and the fuselage is scrap just cut away the pod and use some cya remover to remove the glue fillets and then you are ready to graft on a new pod. I will be getting some spare parts in soon. I would guess an entire fuselage pod would be about $20 plus about $2.00 shipping. Does that seem fair? Thanks again Bob M...
Apr 03, 2012, 08:02 PM
dougmontgomery's Avatar
Looks Nice but a different name might be appropiate- or not since they are two different kinds of builds-

Depron Dynamite here:

Apr 03, 2012, 08:21 PM
No, you can't fly it.
SwissBoy's Avatar
Boom is still intact. (epoxy'd in place though, haha) I may order a fuse from ya, but not till later in the season. I broke my hand and I can't really fly right now. Thanks for the response.
Apr 04, 2012, 07:59 AM
Laser Cutter Guy
Originally Posted by SwissBoy
Boom is still intact. (epoxy'd in place though, haha) I may order a fuse from ya, but not till later in the season. I broke my hand and I can't really fly right now. Thanks for the response.
heat the epoxy with a heat gun and it will peel right off that boom. Hope your hand heals up fast.
May 01, 2012, 01:27 AM
Did I do that?
Fly mine every day. Love it. I am hoping to get a dvr soon also have a keychain camera on the way. Will put up pictures as soon as I can.
May 01, 2012, 05:20 PM
sailplane nut

Dyne-O-Mite DLG

Hi oldvic from Bob M.. Glad to see someone has one flying. How does it fly? Any suggestions as to cg location,control throws, etc? I loaned my prototype to Skip Miller Models to display at Toledo and Fedex destroyed it on the way back so I have to wait for the insurance claim to clear. I acquired a very nice dlg pod from dlgjunkyard and plan on mounting a v-dihedral dyne-O-mite wing and tailfeathers on it to try it out. It is a kevlar/glass layup and is pretty narrow and robust. Also, I now have my 2Meter Dyne-O-Mite finished and ready to test fly as soon as the wind and rain let up. It came out at 28 ounces balanced and ready to go. I streamlined the pod a bit and it is a very nice looking model. I stumbled upon a stash of tow hooks and will be including them with the 2M kit. It has pre-sheeted foam core wings with 1/4" cf tube spars and 1/4" dia aluminum joiners and features flaps or flapperons in the center section driven by 2 servos. I am working on a 3 view to post but haven't had the time to draw them up yet. It looks like about $150.00 shipped as an intro. Pass the word around so I can get a feel for how many kits to make on my first production run. Thanks and let me know how the dlg flies. Thanks Bob M...
May 01, 2012, 05:33 PM
Did I do that?
Great! I have a pod from him that I am hoping to get back to soon. As far as the setup goes I used what you recommended in the instructions. I have my throws cut down since I am kinda rusty at flying but it launches well and I get almost 40 ft when I toss it up I am using this to get my movement back after a surgercy I had. I think it's kinda funny that I am using it for therapy.
Jul 01, 2012, 09:47 PM
sailplane nut
Hello from RCbobcat55 Has anyone else been flying their Dyne-O-Mites? I have 2 left from my last production run and will sell them at a reduced price to finance the next run of 6 kits. One is the standard poly version with flat center and tip dihedral $85.00 shipped and the other one is a v dihedral version for flapperons and it is $90.00 shipped. Any takers let me know. The new kits will have a slightly larger diameter tailboom and an optional tail mounting system along with the original mounts so the customer can choose which one he wants to use. thanks for the interest Bob M...
Aug 30, 2012, 09:10 AM
Did I do that?
Hi there Rob Vic here. Sorry to say my dlg days are over for a while. I had a blood clot cut off blood flow to me legs and they had to amputate the left oe I do have the tight one still. The long process of rehab has begun toward getting a artificer leg. I am hoping I will still be able to toss one up in the air I am left handed so I will spin on my right leg. The prosthetic people say I can do it with lots of time and practice. I will only be flying my helicopters for the time being. I am looking forward to get back to it as soon as I can.
Oct 06, 2012, 09:47 PM
Registered User
Anyone have the measurement for the tip dihedral? I read through the thread, maybe I missed it.
Oct 10, 2012, 10:25 PM
sailplane nut
Hi from RCbobcat55 sorry for the delay in getting back to you. i will go over the paperwork I have and let you know what the dihedral is supposed to be. I have been busy working on the prototype of a micro slope ship I plan to kit, Pre-sheeted cores and built-up balsa fuselage with balsa tailfeaathers.this will be a very light model for small slopes and light lift but it can be ballasted up to really cook. Future options will include a special order glass fuselage and several different airfoils and two different wing planforms. When i get my e-mail problems sorted out I can send a 3 view of both versions (actually sketches) to anyone who asks. If you wish to roll your own I will offer pre-sheeted cores and plans and patterns for $45.00 intro including shipping. Thanks Bob M...PS are there any other dyne-o-mites flying out there? Let me know.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold 1M DLG disser wing pyrsly Aircraft - Sailplanes (FS/W) 2 May 12, 2011 06:03 PM
Sold NIB Arthobby Bobolink 1m dlg Beauregard Aircraft - Sailplanes (FS/W) 2 Jul 13, 2005 04:09 PM
FS: NIB Boblink 1M DLG Lance Prior Aircraft - Sailplanes (FS/W) 1 Dec 06, 2004 03:26 PM
FS: NIB Art Hobby Bobolink 1M DLG Lance Aircraft - Sailplanes (FS/W) 3 Nov 08, 2004 04:51 PM