HEXorcism 600 - Luis & DiaLFonZo-Copter - Design for Cyberdog - RC Groups
Thread Tools
Dec 21, 2011, 02:02 PM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Build Log

HEXorcism 600 - Luis & DiaLFonZo-Copter - Design for Cyberdog

Hi All,

Here is a nice HEX copter we design for Pete "Cyberdog" to take picture with a DSLR camera in a trip he will be doing.

More will be added by him in the next post..
Sign up now
to remove ads between posts
Dec 21, 2011, 02:20 PM
Registered User
Uploading pics at.

Got the frame + gimbal today and so faar i am loving it. Tomorrow i will get my DJI from the post office.

Here are the specs:

6x Avroto 770kv ( or Tiger motors 770kv ) with 11x5 Graupner or APC 12x3.8
DiaLFonzo and Luis Frame
DiaLFonzo and Luis Gimbal
Trex 600 CF booms
2x5000mah 4s Zippy lipos
Flydubution Power Dist
Sony Nex5N camera

More to come
Dec 21, 2011, 02:27 PM
Registered User
Where's the photos guys?
Dec 21, 2011, 02:34 PM
Registered User
Here are some photos of the parts that arrived + gimbal.

Frame plates. Upper, lower and batteryplate.



Hardware for frame + gimbal.

Gimbal with servos.

More to come soon
Dec 21, 2011, 02:40 PM
Registered User
And here are a few pics of things just test assembled. Great fit on everything so faar.

All the nuts will be replaced with black or red ones when i put it all together
Dec 21, 2011, 02:57 PM
Registered User
Heres the camera testmounted to the Gimbal. It has 18-55 lens in the picture but i will be flying with 16mm pancake.

Dec 21, 2011, 03:03 PM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Can't write anything more than...

Dec 21, 2011, 03:10 PM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Here is a printscreen of it with 400mm boom and 12" prop
Dec 21, 2011, 03:23 PM
Simple is the best
I like Gimbal. Looks nice.
Dec 21, 2011, 03:35 PM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Originally Posted by Widelec
I like Gimbal. Looks nice.
Yes, the point was to makes something simple in design that would do the job right.
Still testing needed but look good..
Dec 21, 2011, 03:36 PM
Registered User
Will connect the gimbal to a MiniWii card later today just to try it out. Getting the DJI tomorrow and then the real testing can begin
Dec 21, 2011, 05:20 PM
Simple is the best
I see two servo for tilt in gimbal, correct?
is the Miniwii for two servo control ?
Dec 21, 2011, 05:26 PM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
You only need a y harness
Dec 21, 2011, 05:30 PM
My RC builds in my profile.
daign's Avatar
just want to say man, your work keeps getting better and better. Going to have to pick up a frame from you soon!
Dec 21, 2011, 05:37 PM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Humm.. this one was Luis for the can mount part.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product DiaLFonZo-Copter - Flight controller shield Dialfonzo Multirotor Drone Talk 263 Feb 10, 2014 01:38 PM
Build Log DiaLFonZo - HEXorcism Dialfonzo Multirotor Drone Talk 144 Jan 15, 2013 07:02 AM
Discussion FPV plate Soft mounted - Luis & DiaLFonZo-Copter Dialfonzo Multirotor Drone Talk 5 Jan 05, 2012 01:04 PM
Discussion Proposed Assymetric Quad Copter design... x3n0x Multirotor Drone Talk 5 Jun 23, 2011 03:20 PM
micro copter rotor design Aubrey Electric Heli Talk 33 Feb 24, 2002 10:32 AM