Two 144" long T-38's - Page 179 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 13, 2012, 10:31 PM
Registered User
jefffassbinder's Avatar

Hats Off to Brent

Brent will get his bird back together. Got to give him credit for one building a scratch jet as impressive as it is. And secondly for have the brass to push the throttle and roll into a subtle climb. That's why we build, and I'm sure even though it wasn't a picture perfect day it did fly it did land. I'm sure that Brent has more ideas of how to improve his next flight. It's the only way to figure out a scratch built plane.

The presence of the T-38 was very realistic in flight. I cannot wait till Brent does it again and has the picture perfect flight which will make all the effort even more worthwhile.

Great job Brent.
Sign up now
to remove ads between posts
Oct 13, 2012, 11:38 PM
Mister Fear
Originally Posted by falcon5
I think It could be fact I know it can..just not sure how much weight woould be added. I bet she would weight a few pounds more after the fix
I'm just thinking out loud here... if repairing it would make it too heavy to fly well, I'd repair it and make the coolest static display model ever to hang from my ceiling...

It is way too cool to be scrapped even if it wont fly again.
Oct 14, 2012, 11:16 AM
Onward and upward.
Pilatuspc12's Avatar
Thanks to all you guys who've let me experience something I'd never done before. Brent, thanks so much for letting me help you put your bird together. I'm glad I got to see it fly so beautifully. I know you'll have better times with that fine airplane.
Andy, the same for you too. It was a journey that is still not finished. Who knows where it may lead to. John, Darrell, Rodger, Ed, Hans-Joachim, Woody, Craig and all the rest of the fellows I met out there were so warm and open and congenial, that it was all worth while to bring my cancer stricken wife, out for her birthday, to watch all of the happenings. Thank you all so much! With the grace of the above and beyond, I'll be out there next year with something to fly!

Oct 14, 2012, 11:27 AM
Bajora's Avatar
I've been lurking in the thread for a while and was amazed (as usual) with what Andy and Brent had conjured up. I wish I could have been there to get a chance to shoot some media of them in flight and I am so sorry to see that both of them suffered damage.

I like to read comments like the one above mine ... when folks are impressed by the friendliness and congeniality of the modelers at these events. IMO, that speaks volumes about the folks who attended AITH and they are thus true ambassadors to the hobby. Quite a few of those of wearing the blue and orange shirts at the various events could perhaps take a lesson from this.
Latest blog entry: 2017 Reno Air Races
Oct 14, 2012, 11:44 AM
deltas are cool
AIR SALLY's Avatar
Randy thanks for the kind words,may the good Lord bless you and your wife .it was great to meet you .we surley have a bond with that place and all the good people we meet there,they treat us like rock stars.
Jon we missed you ,and your thoughts are well said.we still had a lot of guys taking pics and vid so i hope all that see them will thanks the guys for doing it ,as you know it takes a lot of work to cover these events.
Oct 14, 2012, 09:21 PM
EB-66C Team Member
J Morgan's Avatar
Was great to meet up with you, enjoyed our visit. Our thoughts are with you and we look forward to seeing you two at future events.
The Vegas meet has a special place for us and always will. Only chance during the year to see some of our West Coast brethren. Have made a special friend in Darrell Stubbs, what an incredible guy.
How do four days go so quick???

Oct 14, 2012, 11:38 PM
deltas are cool
AIR SALLY's Avatar
yeah it seems like a dream
Oct 15, 2012, 09:52 PM
Onward and upward.
Pilatuspc12's Avatar
Thanks John and Rodger,
I'm looking forward to next year to see what else shows up at the "Ace"!
Oct 15, 2012, 10:50 PM
deltas are cool
AIR SALLY's Avatar
something cool always shows up at the "Ace"
Oct 16, 2012, 03:24 AM
Registered User
MaHö's Avatar
Hi, sorry to hear about your problems. Hope you two get it repaired soon.

CN, how about some setup data and pic of your build?! That pic in the video with the open wing area is cool! And you see how huge it is
Did you make the surface like Falcon?!

regards Martin
Oct 16, 2012, 04:40 PM
Official Boat Bum
Eddie P's Avatar
In the road of life and airplanes sometimes we get some serious hair pin turns without warning. But be that as it may, I am so impressed by you, Andy and you, Brent. What a build, what a set of projects, and what talent even among setbacks. And we know it can be fine tuned when the will to get back in there and slug out the fixes and repairs comes. I'm very glad you guys had a couple great days in addition to the -38 experiences. It's what it's all about. Sometimes a project can be overwhelming and take center stage to the point where just going out and flying something else or simple can be a really good dose of what it takes to remember why we have so much fun doing this.

You guys are awesome. Keep the faith.
Oct 16, 2012, 06:06 PM
Capt. Z
falcon5's Avatar
Hey thanks Eddie,
Yep it was a GREAT experiance to build these birds. I learned a ton and got to make friends with a cool dude who really knows his stuff. Going to take what I learned on this project, apply it to the next.

Brents T-38 will fly again. I did look mine over real good the last couple days and it dosn't really look that bad, no damage to fans or electronics. I can fix the airframe no prabblem. Maybe by the next Vegas Ace in the Hole the 38 will fly again.

But my next project is on the drawing board and I think it will really be a good flyer. A real kick in the pants EDF. It's a 98" long Eurofighter that will have the two Stu fans that are in the T-38. 25 pounds AUW and FPV ready with full head tracking. I just finished the 180 degree head tracker rig and man it's sweet. I built a test version of this jet that is also 98" long and weighs18.5 pounds and it fly's great!! so I KNOW I can get it to 25 pounds with the same 27 pounds of thust my 38 had. I have a bunch of flights on my 98" long test version and should be able to knock out this next build in about 8 to 10 weeks.
Goal is to put the head gear on, advance the throttles, roll down the runway, rotate, pull to the vertical, look left, look right and watch the ground fall away . Next flight take the goggles off and have a hoot of time yanking and banking a twin Stu powered jet around the sky.
Oct 16, 2012, 07:24 PM
Lee Liddle
Knife Liddle's Avatar
I'm a big fan of the EF 2000! Will you be doing a build thread on it Andy? I might join in with 3/4th version of yours (aprox 74") for a pair of 90's. I'm going to order some Styro Spray and try it out on something smaller as a construction trainer.
Oct 16, 2012, 07:30 PM
Registered User
LuvEvolution7's Avatar
yeah man, let's see a thread on that one. gotta love the Typhoon.
Oct 16, 2012, 08:00 PM
Registered User
acesimmer's Avatar
Andy... After flying my 64" Su-35 Flanker at the Aces Vegas event this last week end. I really enjoyed how it could maneuver and is just made for a close in dog fighter. So I came away thinking of building a larger version of this after seeing what You and Brent did with the T38's. I was thinking of scaling it up 25% and dropping in a couple of 90 mm fans.

Maybe we should have a dog fight next year in Vegas? World war three anyone? BTW loved the way you flew your T Bird just awesome and super smooth.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Cool Micro F-5/T-38 Parkflyer Build boingk Pusher Prop Jet Models 2 Oct 17, 2011 10:58 PM
Discussion I knew it wouldn't be long!!!!!!! Flightbox FPV Talk 8 Sep 29, 2011 06:17 PM
New Product 1/6 HETZER JAGDPANZER 38(t) Sd.Kfz. 138/2 r/c full metal BIG TANKS PLANT RC Tanks 0 Sep 28, 2011 03:38 PM
Sold Hangar Sale E-Flite P-38 rtf, GP Fokker, WM Miss America EP, Easyglider EZ T-38 ScaleBrad Aircraft - Electric - Airplanes (FS/W) 15 Jan 02, 2008 02:22 PM