1mm Allen Wrench (Hex Key) - RC Groups
Thread Tools
This thread is privately moderated by ShokWaveRider, who may elect to delete unwanted replies.
Dec 20, 2011, 04:08 PM
Trader Rating: 131
IMP Concepts 3D Printing

1mm Allen Wrench (Hex Key)

anyone know where I can get some of these? I need:



Sign up now
to remove ads between posts
Dec 20, 2011, 04:11 PM
Trader Rating: 44
Registered User
cwolfe's Avatar
It's a pain to find. I know. I went to a Harbor frieght and found a little 16pc screw driver set that had allen head attachments in it as small as .05. You'll have better luck looking for a set like that than hex keys.
Dec 20, 2011, 09:45 PM
Trader Rating: 4
slow climbing turn to the left
How about these?http://www.mcmaster.com/#metric-allen-wrenches/=fgafvs
Dec 20, 2011, 10:10 PM
Trader Rating: 98
sailplane nut
Try your local dollar store-I got a 24 piece set of metric and fractional allenwrenches-screwdriver type-for 2.00 Bob M.- RCbobcat55
Dec 20, 2011, 10:48 PM
Trader Rating: 32
Registered User
Digital Don's Avatar

Did you try the local hobby shop? That's where I got mine.

If possible, try to get the ball-end type. They're more versatile.

Dec 20, 2011, 10:58 PM
Trader Rating: 7
Registered User
Grave's RC in Orlando...good place, rc car/heli guys use those sizes
Dec 21, 2011, 12:45 AM
Trader Rating: 21
Propnutz's Avatar
I got mine from my local NAPA auto parts .
Dec 21, 2011, 05:29 AM
Trader Rating: 131
IMP Concepts 3D Printing
From what I can see there is no 1mm 0.9mm seems like the size. Is that a correct assumption? Also thanks for all the great help. Although I have a 0.87mm as measured probably started life as a 0.89mm or .90mm and it does not fit (Too Small). so 1mm seems to be what I need and no one seems to have one.
Last edited by ShokWaveRider; Dec 21, 2011 at 06:20 AM.
Nov 10, 2015, 02:11 AM
Trader Rating: 0
Registered User
ForeverFlying's Avatar
Hi WaveRider,
Did you find it?
I have the same problem.
May 15, 2017, 09:27 PM
Trader Rating: 0
Registered User


Originally Posted by rcbobcat55
Try your local dollar store-I got a 24 piece set of metric and fractional allenwrenches-screwdriver type-for 2.00 Bob M.- RCbobcat55
That's a great tip! Had one of those in my junk drawer and forgot all about it til you mentioned it. Turned out I needed a 1.3 mm and it was in there!

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Where to get Allen Wrench for 1.1mm push rod connectors? learn2turn Foamies (Scratchbuilt) 4 Oct 28, 2010 10:37 AM
Wanted .05" Hex key (Allen Wrench) for set screw Chairwolf Aircraft - General - Miscellaneous (FS/W) 4 May 11, 2010 01:07 PM
Wanted 1mm allen wrench shovelheadfreak Aircraft - General - Miscellaneous (FS/W) 13 Aug 18, 2008 01:07 PM
Discussion Hex(Allen) Key(Wrench) Help! Dave Lindsey Power Systems 5 Nov 02, 2006 07:43 AM
Help! Tiny (<1mm) hex wrench Dr Kiwi Scratchbuilt Indoor and Micro Models 6 Sep 21, 2006 12:38 PM