Thread Tools
This thread is privately moderated by sporter, who may elect to delete unwanted replies.
Dec 20, 2011, 01:54 PM
Trader Rating: 45
Come out swinging
sporter's Avatar
Sold

Getting lower...DLG Pod Mold set


Down to $90...ouch.... This mold set is for the Ozone Pod with snap-on canopy. There were only 10-Ozones made, wings and tails by Chad Sullivan, pods by be, and Mike Seid facilitated the transactions and packaged and shipped. An Allegro boom fits inside and up to and through the bulkhead.

I also sold pods individually to numerous DLG builders and pilots for scratch builds or morphs. Pods sold for about $95 including hardware and bulkhead.

The blue half is for the top, the red half is for the bottom. The grey male molds fit into the female molds like die-matched molds. No bagging required. Just put the epoxy into the mold, lay the cloth down, and press the male in using hardwood strips and C-clamps. Crank down and hot box. The bottom mold needs a little work around the nose. There are a couple of small (<1mm) chips around the mold shelf/cavity intersection, the mold surfaces are fine. I left the little chips in the molds, and trimmed off the flashing from the part seams. This is faster than trying to repair the mold.

The female cavities are epoxy (RR2000) and WS 404 filler with a urethane (HS18) backing. The male presses are HS18 only.

The pink silicone is the internal press used during the joining of the halfs. I will walk the buyer through the process.

You could also cut the back off the molds and use a bladder instead.

I will also include the bulkhead mold. It is 1.5" polycarbonate blocks with the bulkhead shape etched on one surface. Bulkheads were carbon-balsa-carbon sandwich, then hand shaped based on the embossed dimensions on the part.

Looking for $90 plus shipping. Shipping will probably be about $30 because of the weight, I'm not sure though.

Sean
Last edited by sporter; Jul 31, 2012 at 03:30 PM. Reason: Lower Price
Sign up now
to remove ads between posts
Dec 20, 2011, 02:50 PM
Trader Rating: 46
Team Horizon Pilot :)
I have one of these pods. SWEET
Gavin
Latest blog entry: cr
Dec 20, 2011, 03:38 PM
Trader Rating: 22
Aurora Builder
Nice molds. What are/were you using for booms?
Dec 20, 2011, 03:49 PM
Trader Rating: 42
Registered User
fly2bob's Avatar
Quote:
Originally Posted by samc99us
Nice molds. What are/were you using for booms?
Read the third sentence.
Dec 22, 2011, 06:52 PM
Trader Rating: 45
Come out swinging
sporter's Avatar
PMs replied to.

Sean
Jan 09, 2012, 03:56 PM
Trader Rating: 45
Come out swinging
sporter's Avatar
No buyers, price reduced.

Thanks
Sean
Feb 01, 2012, 05:42 PM
Trader Rating: 45
Come out swinging
sporter's Avatar
Price drop.

Sean
Jul 24, 2012, 04:44 PM
Trader Rating: 45
Come out swinging
sporter's Avatar
Price drop to $150.

Sean
Jul 25, 2012, 05:47 PM
Trader Rating: 45
Come out swinging
sporter's Avatar
Price drop $140.

Sean
Jul 25, 2012, 07:13 PM
Trader Rating: 72
Slope Stud
ORANATOR's Avatar
Quote:
Originally Posted by sporter
Price drop $140.

Sean
Sean,

Are you interested in a trade? It makes it go away........ but not to far so will always have access to it.

I am right down the street here in Oceanside.

Oranator
Oran
Jul 25, 2012, 09:10 PM
Trader Rating: 45
Come out swinging
sporter's Avatar
Trade for ??? shoot me a PM.
Jul 26, 2012, 03:58 PM
Trader Rating: 45
Come out swinging
sporter's Avatar
Down to $130.

Sean
Jul 26, 2012, 04:26 PM
Trader Rating: 30
Father of Fr3aK, DLG Pilot
tom43004's Avatar
That brings back some memories.
Jul 27, 2012, 09:22 AM
Trader Rating: 45
Come out swinging
sporter's Avatar
Down to $120.
Jul 27, 2012, 08:31 PM
Trader Rating: 13
Registered User

Need Ward Bling


Hi: Ward told me he made A ton of Servo Bling for you recently, Im trying to locate, to purchase 2 sets of Ward bling for my 2 sailplanes, The Shrike, and the Elf. To make the wings TWISTY. Can you Help this needy boy?? Thanks Bob Hansen

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted DLG Pod Mold j.m. Aircraft - Sailplanes (FS/W) 3 Apr 26, 2010 06:04 PM
Wanted DLG Pod Mold/Fuselage j.m. Aircraft - Sailplanes (FS/W) 5 Feb 14, 2010 02:21 PM
Wanted Looking for DLG pod mold emb145drvr Aircraft - Sailplanes (FS/W) 0 May 25, 2009 06:03 PM
For Sale CNC DLG glider pod mold. RobertTHaas Aircraft - Sailplanes (FS/W) 2 Nov 05, 2008 08:25 PM
Discussion DLG Pod Mold Double Pappa Composites Fabrication 1 Mar 29, 2008 04:24 PM