Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Dec 20, 2011, 01:50 PM
RC Man is offline
Find More Posts by RC Man
A man with too many toys
Discussion

Setup Program Improvement Suggestions


I thought it would be a good idea to start a thread to give HF some feedback on possible improvements to the Setup Program.

1. Add a compass display so that we can tell how well the magnetometer is calibrated. Put it on the first page on top of the artificial horizon.

2. On the board info page add two buttons to zero out the Flights counter and Flight Time counter.


.
Sign up now
to remove ads between posts
Old Dec 20, 2011, 02:45 PM
Wayno Complaino is online now
Find More Posts by Wayno Complaino
Fixed wings can be Drones too!
Wayno Complaino's Avatar
Add images of the black pro board, even though the text says towards the dot the overwhelming visual is the big arrow pointing to the front of the green board.
Old Dec 20, 2011, 04:05 PM
Webheadfred is offline
Find More Posts by Webheadfred
Retired Air Traffic Controller
Webheadfred's Avatar
I don't now about y'all, but I find it a little quirky to get the HFP to connect. I hear the 'bong' sound when I plug it in and sometimes it connects and sometimes it doesn't. Running an old laptop with XP. I do get it to connect but temperamental.
Old Dec 20, 2011, 04:21 PM
Adidas4275 is offline
Find More Posts by Adidas4275
manual flying apologist
Adidas4275's Avatar
i get it to connect if it i put it into diag mode first.

plug the board in with out the receiver connected and then plug it in via USB.

once it connects then plug the receiver power in
Old Dec 20, 2011, 04:24 PM
Stacky is offline
Find More Posts by Stacky
Pants first, then shoes
I bought a PC specifically for the task of talking to my HFP and also my Copter Control board. I have no other software loaded other than the standard and the HF software and CC software. I never have any problems connecting and never have any issues with running the software. I do know some users found problems with their usb leads and when they changed those things improved. Also anti virus software could interfere. If you have multiple usb drivers on your computer that might be used for various applications that Im guessing could cause a problem?. Also I have had to flick the usb switch on the board a couple of times. George has mentioned in another thread that the usb switch could move if you crash hard and it needs to be flicked back into position.
Old Dec 20, 2011, 07:02 PM
Webheadfred is offline
Find More Posts by Webheadfred
Retired Air Traffic Controller
Webheadfred's Avatar
Thanks guys. I'm using the laptop I use to program the Propeller chip, used on the HFP. I think what Adidas said works best. I just plug in the board and let it do it's thing. I then power the receiver. It seems to work most of the time. If not, I repeat until it does.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion New Brushless setup, suggestions please PensFan2987 Electric Power Cars 5 Jul 13, 2011 04:48 PM
Discussion Airframe Suggestions for 1300 watt twin 70mm setup bri6672 Electric Ducted Fan Jet Talk 15 Apr 23, 2011 12:33 AM
Discussion E-starter improvement suggestions? Gnolen Electric Plane Talk 10 Jan 27, 2006 01:50 AM
CAD Program suggestions, maybe TurboCAD deluxe v.10?!? 1Way Modeling Science 5 Apr 27, 2004 07:42 AM
Tipsy Improvement Program Phase 1 an abject failure ! ChrisP Foamies (Kits) 6 Feb 18, 2002 12:07 PM