New Products Flash Sale
Thread Tools
Old Dec 20, 2011, 04:05 AM
ozanozkok is offline
Find More Posts by ozanozkok
Musician-Designer
ozanozkok's Avatar
New Product

COPTERFRAMES Multirotor Products


Hi,
I’m a musician and, flying with multi-copters last 2 years. I don’t know I had crashed how many of them, but a lot. I've bought lots of frames and electronics for my hobby. I've built my own multi-copter over and over approximately hundred times. One day, I thought that, this would be easier with a cnc machine and it would be more enjoyable.

5 months ago, my friend Umit and I have fabricated our own cnc machine. We've designed it together with our friend;Melih and we designed and manufactured multi-copters for our local friends firstly. Finally, we've came with an idea to open a web store. We know that, our products are not the cheapest ones in the world. Because, our products are result of a delicate work; clean craft, good looking and easy to mount.




Sentinel rc Navigation Strobe !

http://copterframes.com/240-thickbox...-rc-strobe.jpg

SKYCAM Quadro-Octo set in stock !
You can setup SKYCAM as a quadrocopter or X8 octocopter .Skycam is lightweighted and has a lot of space for your additonal equipments.





Product page




AURA² in stock!!



Product page


NEW PRODUCT!!


Product Page:SKYCAM 4


New Product !!


Spheric is a multipurpose middle sized gimbal from CopterFrames.Suitable for small and middle sized quadrocopters,hexacopters and octocopters.




You can find more details at :
www.CopterFrames.com



You can find Jason Cole's AURA brushless DSLR gimbal review at:
https://www.rcgroups.com/forums/show....php?t=1997220




New Product!




-Product Link-

New Product:

Mini HDMI output for aerial shoots..




- Designed for aerial photography general-purpose use,ultralight HDMI AV digital simulation module

- HDMI type D interface, compatible with most miniHDMI standard interface devices

- weight,3.6g

- thickness:3mm

- No need adapter wires, plug and play.

Works with:

Sony NEX series (5N, 5R, 6 ,7)
Canon EOS 5D Mark II
Canon EOS 5D Mark III
Panasonic GH2

CopterFrames 4114 AURA motors are in stock




SLED Sony and Canon shutters available:



Product link

Alexmos 3 axis boards available!!


product link




NEW PRODUCT!!

Gopro3 5.8ghz 200mw backpack video tx



Product link

NEW PRODUCT!




NEW PRODUCT!!




New Product!!



New Products in stock!!

Fresh Leaves 5.8 GHz Circular Polarized Antenna Set



3 different Mxl gears







MiniMax Revolver




New Y6 frame parts



New gimbal adapter for DJI F series




Product link



New boom clamps available!






New camera gimbal for Canon t2i (D550) size

Product link

New! 238mm height Landing gears in stock. Cutted from 8mm black delrin,22gr weight.
New! Nex-5 size camera gimbal in stock.

www.copterframes.com

This is our cnc machine , when working on dome mold..
Cnc on a dome mold at Copterframes workshop (0 min 29 sec)


New design quadrocopter frame is done.Name is Grasshopper and it has 3 arms
Grasshopper Quadrocopter Frame (0 min 56 sec)


New camera gimbal from our workshop


Hexacopter assembly guide added to our blog
http://copterframes.blogspot.com/201...bly-guide.html


Some videos of CF-700H Hexacopter

Copterframes SkyCam CF700H with Naza.wmv (1 min 31 sec)


CopterFrames SkyCam CF 700H Hexacopter frame with Naza (1 min 9 sec)
Last edited by ozanozkok; Feb 20, 2016 at 08:39 AM. Reason: title change
Sign up now
to remove ads between posts
Old Dec 20, 2011, 08:04 AM
ozanozkok is offline
Find More Posts by ozanozkok
Musician-Designer
ozanozkok's Avatar
All plates cutted from 1mm GFK.Alluminium arms anodized but we have eloxal version allready.
Old Dec 20, 2011, 08:53 AM
Mix57 is offline
Find More Posts by Mix57
Registered User
Frames does look nice, but i would expect that for Alu frame we could get camera mount and full set at ~150$
Old Dec 20, 2011, 11:31 AM
ozanozkok is offline
Find More Posts by ozanozkok
Musician-Designer
ozanozkok's Avatar
I know body..but when i want pay less,i flew only a fat girl

I think you know too, cnc machining is not cheap process. if you want to fly some more stable and long time,your equipment must light weight.this mean is more cnc time.

It will be more cheap products in our store.

Thanks to your interest.

Best regards.
Old Dec 20, 2011, 11:47 AM
peoples is offline
Find More Posts by peoples
but great concept, keep doing it.
Site Sponsor
Last edited by peoples; Jan 22, 2013 at 04:18 PM.
Old Dec 20, 2011, 11:52 AM
Quad_Addict is offline
Find More Posts by Quad_Addict
Suspended Account
so your just remaking Mikrokopter frames?
Old Dec 20, 2011, 11:57 AM
ozanozkok is offline
Find More Posts by ozanozkok
Musician-Designer
ozanozkok's Avatar
No. they are not mk frame clones.Yes, they ve circle plates but nothing same with mk.
Old Dec 20, 2011, 12:07 PM
Quad_Addict is offline
Find More Posts by Quad_Addict
Suspended Account
Quote:
Originally Posted by ozanozkok View Post
No. they are not mk frame clones.Yes, they ve circle plates but nothing same with mk.
they look exactly the same as your showing, or 99% even down to the battery tray http://shop.quadrocopter.us/LiPo-holder-set_p_258.html sqare plates circle plates. nothing wrong with making the same as long as you sell for atleast half what there worth
-
Old Dec 20, 2011, 12:14 PM
peoples is offline
Find More Posts by peoples
...
Site Sponsor
Last edited by peoples; Jan 22, 2013 at 04:18 PM.
Old Dec 20, 2011, 12:16 PM
peoples is offline
Find More Posts by peoples
...
Site Sponsor
Last edited by peoples; Jan 22, 2013 at 04:18 PM.
Old Dec 20, 2011, 12:17 PM
Quad_Addict is offline
Find More Posts by Quad_Addict
Suspended Account
Quote:
Originally Posted by peoples View Post
could somebody explain me why prices are so different for the same parts like: M3 8mm vibration dampener ?
i know the store for $2.40each and the store for $6 ?
i know everyone want to make some money but come on, isnt it to much?
i know the answer - quality lol
problem is there hard to find as it is M3 anyways, go to the link i put above its the cheapest, some guys like that rusty guy over charges for them but he prolly pays full price hats why lol. where else do you see them other then MK sites?
Old Dec 20, 2011, 12:17 PM
Quad_Addict is offline
Find More Posts by Quad_Addict
Suspended Account
Quote:
Originally Posted by peoples View Post
no they are not the same, price is different http://www.nghobbies.com/cart/index....roducts_id=249
lol yes thats the only difference "price" lol
Old Dec 20, 2011, 12:23 PM
peoples is offline
Find More Posts by peoples
...
Site Sponsor
Last edited by peoples; Jan 22, 2013 at 04:18 PM.
Old Dec 20, 2011, 12:24 PM
Quad_Addict is offline
Find More Posts by Quad_Addict
Suspended Account
Quote:
Originally Posted by peoples View Post
ye i use to buy from zol, but takes to long to get to me in the states, there cheaper here. http://quadrocopter.3dcartstores.com...M3x8_p_42.html

if your in the US anyways.
Old Dec 20, 2011, 01:35 PM
ozanozkok is offline
Find More Posts by ozanozkok
Musician-Designer
ozanozkok's Avatar
Quote:
Originally Posted by peoples View Post
could somebody explain me why prices are so different for the same parts like: M3 8mm vibration dampener ?
i know the store for $2.40each and the store for $6 ?
i know everyone want to make some money but come on, isnt it to much?
i know the answer - quality lol
The pricing is not sellers decision on every product.About vibration dampners, most important thing is orders quantity.for now,I can buy 300 of them.when i can buy 3000 of them, our prices will be 1/3 .

On other hand,this is not our product.We will plan to give them with our camera mounts for free.Vibration dampners are on our stores spare parts category.

And we will plan to sale them 'shipping free' for our customers.

But i dont know any thing about other sellers vibration dampners quality.

Best regards.
Last edited by ozanozkok; Dec 20, 2011 at 02:02 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Gallery New heavy lift frames (X8 and Hexa) catlord Multirotor Talk 117 Jul 12, 2012 12:37 PM
Discussion open source Hexa and no vibes GoPro frames filipinto FPV Talk 2 Feb 21, 2011 03:19 PM
Sold MicroKopter ARF Quad/Hexa G-unit Aircraft - Electric - Helis (FS/W) 3 Aug 23, 2010 10:38 AM
Discussion Folding frame for AP - tri, quad, Hexa, Okto danielpetrescu Multirotor Talk 9 May 10, 2010 01:25 AM
Question Tri/hexa-copter or Quad/Octa-copter and Spartan AP2000i or Helicommand Arthur P. VTOLs 2 May 20, 2007 04:02 PM