Thread Tools
Old Dec 21, 2012, 01:44 PM
jmdlcar is online now
Find More Posts by jmdlcar
Registered User
Quote:
Originally Posted by zrobbie View Post
Jack,
Your info shows you are from Marysville OH. You might try the Marysville Ohio R/C club. contact Larry Clemens @ 937-243-5731 or email @ larry@sonicvision1.com
Thanks for the info
Sign up now
to remove ads between posts
Old Dec 21, 2012, 02:11 PM
Sparky Paul is offline
Find More Posts by Sparky Paul
Ascended Master
Sparky Paul's Avatar
Working up 808 camera pages on my site...
http://www.angelfire.com/indie/aeros...FobCameras.htm
Old Dec 21, 2012, 02:24 PM
Rubis is offline
Find More Posts by Rubis
Registered User
Rubis's Avatar
Quote:
Originally Posted by Sparky Paul View Post
Working up 808 camera pages on my site...
http://www.angelfire.com/indie/aeros...FobCameras.htm

Hello

thank you for the great and beautiful pictures
Congratulations
congratulations and thank you

Rubis
Old Dec 21, 2012, 02:37 PM
eyesonsky is offline
Find More Posts by eyesonsky
Registered User
eyesonsky's Avatar
Quote:
Originally Posted by sfakias View Post
Hello,
what do you used to seal the free end of the heat shrink tube? I mean this red coloured stuff.

I also do caps with heat shrink, and I seal the free end by squeezing its end between my fingers while it is still hot (you must be able to tolerate some heat....!) This causes the tube to become flat at its free end, since the tube sticks to itself.

Regards,
Stavros
It's silicone, it holds well too.

Regards,
Joel
Old Dec 21, 2012, 02:42 PM
crash74 is offline
Find More Posts by crash74
Addicted to Twins
crash74's Avatar
just a thought! cant something so "bulky" that protrudes out like that possibly get bumped and move your lens??
Old Dec 21, 2012, 03:46 PM
ridgewalker is online now
Find More Posts by ridgewalker
The lunatic is on the grass
ridgewalker's Avatar
The D lens is solid,no wiggle or play.
The special lens D camera housing clamps down on the lens barrel very well.

Lens Cap



Vacuum plugs can make good lens caps and can be found at most auto parts stores,a 3/8 inch cap should work,measure your lens width to be sure..

Here is just a random link from the pic above,never tried these ones but giving the link for example.http://www.newegg.com/Product/Produc...FcuZ4Aod9h4AxQ


Here is a vacuum cap from my scrap bin that fit the camera .

Last edited by ridgewalker; Dec 21, 2012 at 03:53 PM.
Old Dec 21, 2012, 03:50 PM
jdr00ejr is offline
Find More Posts by jdr00ejr
Registered User
Quote:
Originally Posted by ridgewalker View Post
The D lens is solid,no wiggle or play.
The special lens D camera housing clamps down on the lens barrel very well.
I would say this is where my problem started. Since receiving my D camera, the lens has never been solid with no wiggle. I suppose that's why on Day 1 it worked okay, and on Day 2 it had issues which I've pretty much narrowed down to the lens ribbon.
Old Dec 21, 2012, 04:13 PM
fishycomics is offline
Find More Posts by fishycomics
Suspended Account
Quote:
Originally Posted by ridgewalker View Post
The D lens is solid,no wiggle or play.
The special lens D camera housing clamps down on the lens barrel very well.

Lens Cap]
If we are ordering the case & lens D, we are not given adhesive, or told to use adhesive to hold firmly the lens module in place? And if one has made an order from the dealer direct(camera and lens as a whole), only then will we see if that holds true? To prevent future rattle, shakes or looseness, that would be something to keep in mind, how the slot holds the lens and module in place.

the modified one's will have a ever so slightly movement. Just be careful how you place something over the lens, that will take away the oils of the outer lens. Finger print, to abrasive materials.

FISHYCOMICS
Old Dec 21, 2012, 04:32 PM
ridgewalker is online now
Find More Posts by ridgewalker
The lunatic is on the grass
ridgewalker's Avatar
Don't think i got any adhesive with the camera housing and lens D when ordered.
Didn't need any either,the housing just clamps down on the barrel and the lens is very secure.

On the original lens though,(v1) i did end up having to secure the lens to the pcb with a couple small blobs of hot glue.

Can imagine if one was to mod a "regular" (non lens D) housing that the lens D might not fit well.
Had thought about doing that when first deciding on getting a D lens but decided using the proper housing for the lens would give the best results and least aggravation in the end.



So what's the word on the new model coming out...

How about some teaser info about the new model...what's one feature the new camera will have that we don't have now.....?
Old Dec 21, 2012, 05:02 PM
fishycomics is offline
Find More Posts by fishycomics
Suspended Account
Nobody gotten adhesive, or was told about to secure it, it is more a snap together deal? It is a cheap way to go about placing two plastic tabs up front, and less screws like the back.

I rather not force pressure,

Four screw case is needed.

FISHYCOMICS
Old Dec 21, 2012, 05:30 PM
empeabee is offline
Find More Posts by empeabee
Fidler & twidler
empeabee's Avatar
Quote:
Originally Posted by Tony32 View Post
As many others post their videos, I might as well post one aswell. Timeleapse filming outside my apartment using a external battery. #16camera

1 pic/sec 0.58 firmware
That come out very well ( in UK ). Thanks
Mike
Old Dec 21, 2012, 06:39 PM
Flyor is offline
Find More Posts by Flyor
Registered User

Bird filming


Hi guys,

I'm new here, I was lurking for some time to find out all there is to know about the 808 #16

First of all thanks for all the great info here especially Tom Frank for this group and Isoprop for the development of the handy gui.

Until today I had nothing to ad to this group but now I made a small film you might want to see

MJX F45 bird filming (1 min 0 sec)


Hope you enjoy
Regards
Old Dec 21, 2012, 07:13 PM
metalbender4by is online now
Find More Posts by metalbender4by
hey whats burning?
metalbender4by's Avatar
Wow it was still working under water. Was it in a case? Hope yo didn't loose to much.
Old Dec 21, 2012, 07:23 PM
empeabee is offline
Find More Posts by empeabee
Fidler & twidler
empeabee's Avatar
Quote:
Originally Posted by Flyor View Post
Hi guys,

I'm new here, I was lurking for some time to find out all there is to know about the 808 #16

First of all thanks for all the great info here especially Tom Frank for this group and Isoprop for the development of the handy gui.

Until today I had nothing to ad to this group but now I made a small film you might want to see


Hope you enjoy
Regards
Well that's different
Thanks for sharing, though I think Enjoy is a word I would not use for a handful of wet, weed encrusted 'Pride and Joy'.
I hope you managed to dry it all out and get it flying again.
Mike
( Mijk )
Last edited by empeabee; Dec 21, 2012 at 07:25 PM. Reason: added not - fumble fingers
Old Dec 21, 2012, 07:31 PM
livonia bob is offline
Find More Posts by livonia bob
Heli collector
livonia bob's Avatar
Quote:
Originally Posted by Flyor View Post
Hi guys,

I'm new here, I was lurking for some time to find out all there is to know about the 808 #16

First of all thanks for all the great info here especially Tom Frank for this group and Isoprop for the development of the handy gui.

Until today I had nothing to ad to this group but now I made a small film you might want to see

http://www.youtube.com/watch?v=TZSR1_s3MFw

Hope you enjoy
Regards
That was very refreshing to watch.. Thank you.. Good little camera.. But didn't see any fish in there...


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Looking to buy #11 HD Key Cam within US Abolfazl Aerial Photography 4 Mar 20, 2016 01:14 AM
Discussion The REAL (#11) HD Key Cam Thread (PLEASE! READ POSTS #1-#3 BEFORE POSTING QUESTIONS!) Tom Frank Aerial Photography 9936 Feb 11, 2014 10:56 AM
Poll Poll For Current and Future #11 HD Key Cam Users Tom Frank Aerial Photography 0 Sep 26, 2011 12:55 AM
Discussion New HD Key Cam CHAMP? 1080x720p 3 HOUR RECORD TIME! Jaybee Aerial Photography 4 Jun 02, 2011 12:39 PM