Walkera 4G6 Helicopter using the new V120D02S receiver - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by OmegaRedIsDMan, who may elect to delete unwanted replies.
Dec 15, 2011, 02:16 PM
Registered User
Build Log

Walkera 4G6 Helicopter using the new V120D02S receiver


I just finished installing the V120D02S RX in my 4G6. I copied the settings from my genius cp. Then hovered it only a foot off the ground. Still in ground effect. Even so I could tell it was much more stable but something was off. When I hit throttle hold the head speed would slow but the heli. would float up a bit first Turns out that my pitch channel needed reversing. It's a good thing I didn't try to do more than hover a foot off of the ground before finding that out

I also tried flying it with the rx in setup mode. Since I still have the flybar on that made it fly just like having the old 2609 rx in. Pretty cool to be able to switch back and fourth.

I'm still tweaking my tail gyro setup but even with the pesky vibration I have the tail holds much better in rate mode than I ever could get my 2609 rx gyro to hold. So far I'm impressed.


so I finally tracked down the vibration I had. Now flying my flybarred 4G6 with the V120D02 RX seems very smooth and stable. It will stay in the same orientation hands off for a few seconds. Since i'm flying indoors I have to put my hands back on and touch the pitch because its very sensitive with the high head speed of the TA915.

I have the Elevator\Aileron gain, and extent set to 10 o'clock. With these settings it felt like I had too much expo. So I went in to my 2801 TX and set expo to linear (no expo). That only made things slightly more responsive.

I just realized that when I originally set the two pots I thought one was for aileron gain and the other was for elevator gain. So maybe if I go back and increase the elevator/aileron extent pot, the heli. will feel more responsive
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product New "Ultra Durable" 120 CP Heli from Walkera - V120D02S zadaw Micro Helis 17634 Oct 28, 2017 01:08 PM
Discussion Upgrade Options for Walkera 120CPs using V120D02S Parts zadaw Micro Helis 224 Jun 12, 2012 09:46 AM
Sold Walkera RX2610S 3-Axis/receiver for 4G6 Maverickk Aircraft - Electric - Helis (FS/W) 1 Jun 02, 2011 03:49 PM
Sold Walkera 4G6 receiver RX-2609....$25 shipped. helilama3 Aircraft - Electric - Helis (FS/W) 0 Apr 17, 2011 10:40 AM
Found walkera 4g6 or heli-max 125 cp helicopter parts needed nitrodude71 Aircraft - Electric - Helis (FS/W) 4 Dec 30, 2010 11:06 AM