Thread Tools
Dec 04, 2011, 08:39 PM
Registered User
Discussion

tail wag solution has anyone else tried this method ?


i just had to share .
im using the gy256 and 11 dolla s9257 servo
=wc= tail wag solution by jasmine tested with trex 450 and align trex 500 works great (3 min 28 sec)
Sign up now
to remove ads between posts
Dec 05, 2011, 06:43 AM
Registered User
Steve Joblin's Avatar
Great vid WC!

I had a bad tail wag on my TRex 250 and was able to get rid of most of my wag by creating my own hole even closer to the center than the hole that the servo horn came with!

It is a great technique indeed!
Dec 05, 2011, 07:43 AM
Make Stuff!
thrustboy's Avatar
...and may I say I very much enjoy your sense of humor!!
Dec 05, 2011, 10:14 PM
Registered User
Quote:
Originally Posted by Steve Joblin View Post
Great vid WC!

I had a bad tail wag on my TRex 250 and was able to get rid of most of my wag by creating my own hole even closer to the center than the hole that the servo horn came with!

It is a great technique indeed!
Keep in mind that the closer to the center of the servo the slower the response of the tail rotor. You should use fast response servos if doing so.
Dec 06, 2011, 11:12 AM
Registered User
cbxer55's Avatar
Also it limits the total amount of throw, so the tail rotor will not move as much as it did previously. Slower piros, maybe not enough authority to stop a spin at full power application.
Dec 24, 2011, 03:47 AM
Registered User
Quote:
Originally Posted by cbxer55 View Post
Also it limits the total amount of throw, so the tail rotor will not move as much as it did previously. Slower piros, maybe not enough authority to stop a spin at full power application.
not really i have plenty of throw left and the tail stops on a dime i love it.
titan trex 450 stable focker assan gy250 and gotek gs9257 11 dolla tail servo (5 min 4 sec)
Dec 24, 2011, 08:06 AM
heli wrecker extrordinaire
Nute's Avatar
thanx for that video! cured mine.
Dec 24, 2011, 10:45 AM
Registered User
Quote:
Originally Posted by Nute View Post
thanx for that video! cured mine.
my next video will be some mild 3d

this is one of the cheapest builds in the world so its almost worry free

5 dolla mg servos 20 dolla motor and esc and 1 dolla main blades 11 dolla assan gyro

then the last video we are gonna purposely crash this bird into the dirt then

add up the cost for the replacement parts should be 20 bucks or less


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion has anyone tried this motor? Tacon 36-74-1700kv cleansho93 Foamy EDFs 7 Aug 15, 2012 12:08 PM
Discussion has anyone tried this motor? Tacon 36-74-1700kv cleansho93 Electric Ducted Fan Jet Talk 16 Nov 14, 2011 09:25 AM
Discussion Hello! Has anyone tried this mini DVR ? motiganot FPV Talk 6 Oct 24, 2011 02:16 PM
Discussion Has anyone tried this gyro? Jetskeeter Micro Helis 5 Apr 30, 2011 08:07 AM
Question [B]Chili Pepper CP 20L 4200 Fried! Has anyone else tried this motor?[/B] Tomokabear Power Systems 21 Jan 15, 2005 11:15 AM