Upgrading E-Sky Belt CP V2 to Belt CPX

I have noticed that my Belt CP V2 does not fly as well as my Honey Bee King4. The problem is with cyclic inputs being delayed and inaccurate, I decided it's the CP V2's linkage system that's the problem. I tried adjusting it as best as I can and taking out the slop, but it does not seem to be as good as I would like it.

The Belt CPX has a direct-to-swash CCPM system, and after doing some research, I have compiled a shopping list to "upgrade" the CPv2 to CPX. This is what I bought:

1.Part No: 002810 - Esky Anti-washout Set Of Swashplate.
2.Part No: 002805 - Esky Servo Pushrod Set Part No: 002805 - Esky.
Servo Pushrod Set.
3.Part No: 002804 - Esky Main Frame Set.
4.Part No: 002803 - Esky Pushrod Set.
5.Part No: 002801 - Esky Main Rotor Head Set.
6.(This is extra, it's not a part of the standard CPX package) Xtreme Fiber Blade for Belt CP V2 (Blue).

I'm not sure if this is all I need, so when the parts come in, I'll post a build/upgrade with the adventures/problems I encounter.