Free Flight FF Auto Balance Controller with 3D Acceleration Sensor For QuadCopter - Page 9 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Dec 16, 2011, 06:22 PM
Registered User
Today I have maked the firsts flights. The board runs fine. The only thing I donīt know if I test ok itīs the sticks calibration, but i have to say that the board stabilizes ok and very smoothly, it tends to drift something to the sides in neutral position but thereīs no vibration. The yaw is solid.
I have no video but itīs a good start.
Sign up now
to remove ads between posts
Dec 17, 2011, 07:41 AM
Did you do any of the RC or IMU calibrations that are available in the setup application to see if you could improve the performance?

Interesting that the setup application has features for tuning "height" which is likely altitude control. Also the BMP085 SMD contacts visible on the board suggest that it is possible. Someone should mount one and see if it works
Quadrocopter and Tricopter Mega Link Index
Dec 17, 2011, 03:25 PM
Registered User
it could be the cheaper solution for a fpv solution
Dec 17, 2011, 08:06 PM
Registered User
Any videos?
Last edited by kanchana; Dec 18, 2011 at 05:58 PM.
Dec 17, 2011, 08:23 PM
JUERGEN_'s Avatar
Last edited by JUERGEN_; Dec 17, 2011 at 08:29 PM.
Dec 17, 2011, 10:57 PM
Registered User

Dec 18, 2011, 01:22 PM
Suspended Account
Dec 18, 2011, 01:51 PM
Flying Like Evil
C team MOD's Avatar
Originally Posted by n3m1s1s
Dec 18, 2011, 01:56 PM
Registered User
Dec 20, 2011, 09:24 PM
Flying Like Evil
C team MOD's Avatar
Got today my FF board.
Swope my TMF pro from my DIABLO EVIL FLY Quad with this FF board.
Took me about 10 min to setuping the all thing.
First off all, the web manuel indicated that all channels must be on REVERSE mode. NOT ON WALKERA 2801 PRO. All channels must be on NORMAL.
I did not use the PC TOOL, I just plug the board and had my first fly.
Make sure to leave your travadj or E.Point on 100 % level while calibrate stick.
Then Fly ........ Very stable.
What 's surprising me most was the YAW witch is very VIF.
made a very quick video..... Less than 2 min cause I had to leave and go to work....and it was raining as well.
Find below a video
Evil©Fly Diablo Free Flight inside (1 min 50 sec)
Dec 20, 2011, 09:31 PM
Suspended Account
Looks good
Dec 20, 2011, 11:55 PM
Registered User
Dec 21, 2011, 01:08 AM
Registered User
Dec 21, 2011, 04:57 AM
Registered User
When you have time, can you show or describe how well auto level works? Maybe make a frisbee test if it as good as Naza and TMF... ;-)
Dec 21, 2011, 05:17 AM
Suspended Account
Originally Posted by alek3d
When you have time, can you show or describe how well auto level works? Maybe make a frisbee test if it as good as Naza and TMF... ;-)
$45 chinese board beating Naza, *that* would be hilarious.
Actually I guess even handmade $15 multiwii from raped parts beats naza except at altitude hold which I don't even care about. It just doesn't come in a box
Last edited by timecop; Dec 21, 2011 at 05:23 AM. Reason: edit: box

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Complete MultiWii Quadcopter Flight Controller madushan2008 Aircraft - Electric - Multirotor (FS/W) 3 Aug 11, 2011 09:25 AM
Sold FY90Q Flight Controller for Quadcopter - $70 shipped jpsabo Aircraft - Electric - Multirotor (FS/W) 1 Jul 29, 2011 11:21 AM
For Sale Complete MultiWii Quadcopter Flight Controller Kit madushan2008 Aircraft - Electric - Multirotor (FS/W) 7 Jul 26, 2011 09:58 AM
Sold Multi Wii flight controller with auto level ver 1.7 tc3wins Aircraft - Electric - Multirotor (FS/W) 1 May 08, 2011 02:02 AM
Video Trex SE...3d flight with auto Nick Maxwell Electric Heli Talk 10 Dec 18, 2006 10:23 PM