Thread Tools
Old Jan 13, 2013, 08:16 AM
helizrnew2me is offline
Find More Posts by helizrnew2me
Registered User
helizrnew2me's Avatar
what quad do you have naamis?are your esc`s and motors 4s capable?
Sign up now
to remove ads between posts
Old Jan 13, 2013, 09:25 AM
Naamis is offline
Find More Posts by Naamis
Registered User
Quote:
Originally Posted by helizrnew2me View Post
what quad do you have naamis?are your esc`s and motors 4s capable?
Gaui x500 frame with x330 scorpion motors and escs. The motors are 3s but the escs 3-4s. Basically just testing out the setup. The main issue with the motors would be over heating... The again, it's way below freezing here...
Old Jan 14, 2013, 12:27 AM
scub is offline
Find More Posts by scub
Registered User
if i make quick random movements or i hit one of the arms it will start trembling like a bee. anything i could change so it recovers and levels again?

i used 230mm PID setting for 240mm quad.

Roll*Pit_P 60
Roll*Pit_I 14
Roll*Pit_D 75
Last edited by scub; Jan 14, 2013 at 02:19 AM.
Old Jan 15, 2013, 06:21 AM
Diafragma1939 is offline
Find More Posts by Diafragma1939
Registered User
Hello

I know I've read somewhere a way to transform a FreeFlight board into a standalone gimbal controller using Timecops multiwii firmware port, but I can't find where than info was… can somebody please tell me the necessary steps to do this…

Please could the info be in "For dummies" kind of language, since I've never used a Multiwii firmware or anything like it…

Thanks a lot…
Old Jan 18, 2013, 07:23 AM
Mybrains is offline
Find More Posts by Mybrains
crashing is how I learn....
Mybrains's Avatar

MMC10 boards <$35


Hi Guys,

I am flying a white 1.3 board but noted a supplier that de bundled the USB interface and is selling the flight board for $34.77atm. Cheapest freight is 4 bucks...
http://www.himodel.com/multi_rotors/...ontroller.html

PS any firmware later than 1.31 out yet and where on QQ groups do these guys post (Google chrome will auto translate chinese to english for us to read)
Pete
Old Jan 24, 2013, 05:32 PM
bakchos is offline
Find More Posts by bakchos
WannaBeLikeJoshTheSlowJet
bakchos's Avatar
Hey guys, i have a spare FF V1.22 (white board) , i dont have the programmer or the wires that were included with it, i still use one on my quad and i need to keep the programmer.

To be honest i have no idea what these boards are worth now, i paid 50 + shipping 2 years ago.

If someone with a programmer would like to have a 2nd board, just make me an offer and i will take it out of the dusty bin !

I will film the connection and show that it works before sending of course.

i am in Canada, Quebec.

Thanks !
Old Jan 25, 2013, 04:15 PM
GM74 is offline
Find More Posts by GM74
Registered User
Hi!

I have probleme with FF board V1.31 from ebay (vulcano sealer; unfortunately i have seen warning comment to late)

first start just blue led on, and buzzer on everytime, impossible to connect computer (port is ok but no com)
impossible to flash, imposible to set up, impossible to fly,

I need help please!!
Old Jan 26, 2013, 12:46 PM
raceagain is offline
Find More Posts by raceagain
Registered User
Quote:
Originally Posted by Diafragma1939 View Post
Hello

I know I've read somewhere a way to transform a FreeFlight board into a standalone gimbal controller using Timecops multiwii firmware port, but I can't find where than info was… can somebody please tell me the necessary steps to do this…

Please could the info be in "For dummies" kind of language, since I've never used a Multiwii firmware or anything like it…

Thanks a lot…

I'm also looking for a gimbal solution with the ff board. I'm also looking for the thread with multiwii software from timecop.

Please send a link guys :-)
Old Jan 26, 2013, 06:43 PM
rcjose is offline
Find More Posts by rcjose
Registered User
Quote:
Originally Posted by bakchos View Post
Hey guys, i have a spare FF V1.22 (white board) , i dont have the programmer or the wires that were included with it, i still use one on my quad and i need to keep the programmer.

To be honest i have no idea what these boards are worth now, i paid 50 + shipping 2 years ago.

If someone with a programmer would like to have a 2nd board, just make me an offer and i will take it out of the dusty bin !

I will film the connection and show that it works before sending of course.

i am in Canada, Quebec.

Thanks !
GoodluckBuy.con now sells the USB programmer. Do a search on FF-C10
Old Jan 26, 2013, 06:47 PM
rcjose is offline
Find More Posts by rcjose
Registered User
Quote:
Originally Posted by GM74 View Post
Hi!

I have probleme with FF board V1.31 from ebay (vulcano sealer; unfortunately i have seen warning comment to late)

first start just blue led on, and buzzer on everytime, impossible to connect computer (port is ok but no com)
impossible to flash, imposible to set up, impossible to fly,

I need help please!!
Here is the english manual I wrote. It;s also linked on the fiurst page of this thread. Follow it step by step.


If you connect the USB programmer to your pc and the FF board first and then power on the FF board. you are in "Normal" mode and can use the ZNS appkcation to pogram it.

If you power up the FF board and then connect and power up the USB programmer, youy will be in "Boot" mode and can re-flash firmware.
Old Jan 26, 2013, 06:48 PM
bakchos is offline
Find More Posts by bakchos
WannaBeLikeJoshTheSlowJet
bakchos's Avatar
Quote:
Originally Posted by rcjose View Post
GoodluckBuy.con now sells the USB programmer. Do a search on FF-C10
Thanks, but i am not looking to use it, i was asking if someone wants to buy it from me
Old Jan 26, 2013, 10:49 PM
eDoug is offline
Find More Posts by eDoug
Registered User
eDoug's Avatar
Quote:
Originally Posted by raceagain View Post
I'm also looking for a gimbal solution with the ff board. I'm also looking for the thread with multiwii software from timecop.

Please send a link guys :-)
Search timecops posts earlier in this thread as well as look here and here.
Old Jan 27, 2013, 01:34 PM
raceagain is offline
Find More Posts by raceagain
Registered User
Quote:
Originally Posted by danger_mouse View Post
Search timecops posts earlier in this thread as well as look here and here.
OK, I was looking for these pages. But I'm not a specialist. So I'm looking for a step by step procedure to get my ff-board running with the multiwii software.

To adjust that board will be possible for me.

May someone can help me to get such a step by step procedure?

I have a win7 laptop, the original usb-programmer from goodluckbuy.com and I bought the board in march 2012.

I don't know what more info's you need.........

guys, thank you very much for help-post.
Old Feb 03, 2013, 02:06 AM
Tcabw is offline
Find More Posts by Tcabw
Tony C
Quote:
Originally Posted by bakchos View Post
Thanks, but i am not looking to use it, i was asking if someone wants to buy it from me
Hi,
Have you sold it? and if not, are you interested in posting it to New Zealand?
I've already got one which is working great and a spare would be good.
Old Feb 25, 2013, 08:20 AM
rotorlens is offline
Find More Posts by rotorlens
Registered User
Hi All,

I have a hexacopter from sdshobby.com with the mmc10 flight control board.
They tell me that it's RTF but I want to fine tune it.
In fact the first time it flew I couldn't control the hexa.
Can anyone tell me if this board controls 6 motors?
When I connect the control board to my pc motors 5 and 6 don't work, only 1 thru 4.
I can't find anything on this subject.

Thanks.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Complete MultiWii Quadcopter Flight Controller madushan2008 Aircraft - Electric - Multirotor (FS/W) 3 Aug 11, 2011 09:25 AM
Sold FY90Q Flight Controller for Quadcopter - $70 shipped jpsabo Aircraft - Electric - Multirotor (FS/W) 1 Jul 29, 2011 11:21 AM
For Sale Complete MultiWii Quadcopter Flight Controller Kit madushan2008 Aircraft - Electric - Multirotor (FS/W) 7 Jul 26, 2011 09:58 AM
Sold Multi Wii flight controller with auto level ver 1.7 tc3wins Aircraft - Electric - Multirotor (FS/W) 1 May 08, 2011 02:02 AM
Video Trex SE...3d flight with auto Nick Maxwell Electric Heli Talk 10 Dec 18, 2006 10:23 PM