Shop our Airplanes Products Drone Products Sales
Jun 04, 2012, 02:43 PM
Registered User
RoboSerg's Avatar
Quote:
Originally Posted by Daryoon View Post
RoboSerg:
That sucks...but it happens. Even on the brand name helis.

The POT inside the servo is probably messed up. Telling the motor to move the arm but not getting feedback that it's been done. So it hits the servo endpoint. The motor continues to spin and thus it start to overheat. If left, the motor will burn out or burn up the FETs for the servo.

A new RX board is $12. Where did you buy the heli? I have heard some people having good result getting Banggood to step up and take care of the issue.
Bought on hobbyking.com called FP100. I will just get the BNF version for 20.
Sign up now
to remove ads between posts
Jun 04, 2012, 02:43 PM
It flies!!! ... so who cares ?
erdnuckel2's Avatar
Quote:
Originally Posted by RoboSerg View Post
Got this heli broken out of the box .The right servo is stuck and doesnt move. It also makes funny noises if I try to control it via TX. The metal cylinder also get hot with power on - see below pic. Is it a common fabrication failure on such a cheap heli ?

I dont think I can give it back, be cause I will have to send it back to China, so I am open to any suggestions.
I dont know ... what I can tell you though is that I ordered 9 V911 up to now - and they all worked pretty well out of box ...
Latest blog entry: Random Pictures ...
Jun 04, 2012, 02:54 PM
Flying mostly micro's
BlueHavoc's Avatar
Quote:
Originally Posted by erdnuckel2 View Post
I dont know ... what I can tell you though is that I ordered 9 V911 up to now - and they all worked pretty well out of box ...
Same here Erd, I've got about 5 or 6 now and all were great OOTB.
Jun 04, 2012, 02:55 PM
Registered User
RoboSerg's Avatar
Quote:
Originally Posted by erdnuckel2 View Post
I dont know ... what I can tell you though is that I ordered 9 V911 up to now - and they all worked pretty well out of box ...
Hey there erdnuckel2, you seem to be in every thread I write in to
But I cant stop wondering, why buy 9 helis? As a gift for the friends ?
Jun 04, 2012, 03:14 PM
Registered User
Quote:
Originally Posted by RoboSerg View Post
Hey there erdnuckel2, you seem to be in every thread I write in to
But I cant stop wondering, why buy 9 helis? As a gift for the friends ?
They're cheap. If you need spare parts just buy a new one. Eventually you can combine broken ones into working ones, and it's not very expensive to do so.

Also, they come in four colors. You have to have at least two of each. And then a spare. Of each color. And then one to glue to your car. Because they're cheap.
Jun 04, 2012, 03:23 PM
RC beginner
saturday my 2yr old heli-fetcher (endless energy) ran up to my blue one and stepped firmly on the tail. i told him to slow down 100 times but you know kids. prop bent and fin gone. im wondering if that is just for looks or what. thank god for spare props.

welcome to the NUT FUN house, sakodak.
Jun 04, 2012, 03:26 PM
Registered User
Need help. Should I buy the yellow one?
http://www.banggood.com/Wholesale-V9...f-p-46299.html
Jun 04, 2012, 03:29 PM
RC beginner
thats funny. didnt aaron post a little while ago saying the yellow ones not made by wltoys?
Jun 04, 2012, 03:29 PM
Registered User
RoboSerg's Avatar
Quote:
Originally Posted by sakodak View Post
They're cheap. If you need spare parts just buy a new one. Eventually you can combine broken ones into working ones, and it's not very expensive to do so.

Also, they come in four colors. You have to have at least two of each. And then a spare. Of each color. And then one to glue to your car. Because they're cheap.
Seems fine, expect for the part where you glue the heli to the car. Why ?
Jun 04, 2012, 03:38 PM
Registered User
seefest's Avatar
I've bought 4 RTF V911's and 5 BNF versions.

One RTF was DOA, and one BNF has a bad gyro.

The RTF I bought stateside so I sent it back. The bad BNF I will use for parts.

Still pretty impressed with these little heli's.
Jun 04, 2012, 03:47 PM
Registered User
Quote:
Originally Posted by mystman View Post
Need help. Should I buy the yellow one?
http://www.banggood.com/Wholesale-V9...f-p-46299.html
Oups, I did it again. I've just ordered one. I'm looking forward to the changes this v911 will have.
Jun 04, 2012, 03:48 PM
Registered User
Quote:
Originally Posted by RoboSerg View Post
Seems fine, expect for the part where you glue the heli to the car. Why ?
Why not?

Do enough and you get the flying car of the future.
Jun 04, 2012, 04:09 PM
It flies!!! ... so who cares ?
erdnuckel2's Avatar
Quote:
Originally Posted by RoboSerg View Post
Hey there erdnuckel2, you seem to be in every thread I write in to
But I cant stop wondering, why buy 9 helis? As a gift for the friends ?
Post 8360 ... if something breaks ... take a new one (first there is a lot of stuff I dont have the skill to repair and second there is stuff where I think 20$ for a new heli is not worth the time and effort to repair a broken one ...

Plus, I am going to have to reduce the number of threads I am on, you are right ... (I think I'mgonna focus more on my blog again ...)
Latest blog entry: Random Pictures ...
Jun 04, 2012, 05:36 PM
What Do You Drive?
Pancari's Avatar
Quote:
Originally Posted by GrandpappyToke View Post
Ok so I tried my best to snap a few pics of how I attached the LED wires to my PCB as I explained in a previous post. Sorry about the quality, I had trouble getting my iphone to focus on something as small as this.

All i did was wrap the ends of the LED wires around the ends of the battery wires where they connect to the PCB, and put some silicone kinda stuff on to hold them in place.
Thanks, I'll need to save those photos, take the canopy of the V911 and see those solder points.
Jun 04, 2012, 05:45 PM
Heli Mania
Hayabusa Heli's Avatar
Quote:
Originally Posted by dave1993 View Post
yes, i know. but james comment about v911 struck me as odd. more likely future products (wltoys) might switch protocols but id be very surprised if they fatally altered a heli model halfway through the production cycle. i doubt w.l. is that stupid. you never know though.
WL Toys has been tweaking the V911 with many changes throughout production since it first came out. If they might get into legal trouble for using a protocol they don't have permission to use, then they will change the V911 as a result.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Jiuchon 9C002, a Solo Pro clone? SoloProFan Micro Helis 103 Feb 29, 2012 02:24 PM
Discussion Interesting Solo Pro? Clone gordonzo Micro Helis 46 Nov 30, 2011 03:15 AM
Question Which 100 sized heli after Solo Pro? Tuc Micro Helis 16 Jun 13, 2011 01:52 PM
Sold $100 !NEW ARF Storm 250 (Trex Clone) With Align Upgrades, Tons of Extras! $100!! RChelisrule Aircraft - Electric - Helis (FS/W) 1 May 31, 2011 12:26 AM