Shop our Airplanes Products Drone Products Sales
May 14, 2012, 12:38 PM
Heli Mania
Hayabusa Heli's Avatar
Quote:
Originally Posted by FyreSG View Post
Try the following:

1. Lubricate the various joins and bearings. It really does help increase efficiency and increase lift.
Do not over lubricate the main blade pivots ... it will cause the heli to "shudder". This was something I discovered a while ago, and posted about it then.
Sign up now
to remove ads between posts
May 14, 2012, 12:39 PM
Brosol
Brosol's Avatar
Quote:
Originally Posted by dave1993 View Post
considering cost of cf if extreme price is any indication this idea will not be adopted. at least i hope not since low cost of this heli is the only reason myself and other locals showed interest in the first place. we do not need "walkera pricing" here. imo except for suggestions to reinforce plastic itll be hard to improve on the current design.
IMHO XTreme upgrades are overpriced. Maybe WLToys can make such upgrades cheaper?
May 14, 2012, 12:39 PM
Heli Mania
Hayabusa Heli's Avatar
Quote:
Originally Posted by jameschen072 View Post
Greetings fans of the V911!
I received a box today about the size of a mini fridge!! And in it I found 9 V911s!!! Called the owner to see what it was about and he said it was his way of saying "thank you" for the demonstration video I made for him at the Beijing RC show... was very surprised :P

ANYWAYS, the point of my post is to tell you the other things we talked about in the call:

a) There are models nearing completion that are going to be...quite shocking and unexpected..(I was very surprised when I heard what they were...) :P Stay tuned! He said pre-production samples will come my way so you guys will see it!

b) Paddles are being seriously considered now after my talks with them. They are requesting detailed pictures so if you have them, don't be shy and post them up! Your mod might end up changing the V911's performance!

Anyways, want to guess what the new models might be? :P
Cool news ... can't wait to see what WLToys has in store. I'd volunteer to do some un-biased testing for them if they could send some free samples.
May 14, 2012, 12:44 PM
Brosol
Brosol's Avatar
Quote:
Originally Posted by MassiveOverkill View Post
This.
I also prefer making the CF flybar as a single solid piece as well. As I previously mentioned IMHO the XTreme flybar is not good example of how strong a CF flybar can be due to its design: 2 pieces of CF Rod glued to a weak plastic hub. Adding heavier flybar weights makes the problems worse.
May 14, 2012, 12:46 PM
Registered User
Apphoard's Avatar
Quote:
Originally Posted by Hayabusa Heli View Post
Cool news ... can't wait to see what WLToys has in store. I'd volunteer to do some un-biased testing for them if they could send some free samples.
+1 on that I'm in also.
May 14, 2012, 12:48 PM
Registered User
Quote:
Originally Posted by KKDDMM View Post
barless-mod
accelerated-bell-head-mod
bell-weight light weight mod

to modify V911 is very interesting!!!
I love V911!!!
KKDDMM, how does the barless V911 fly?
May 14, 2012, 12:51 PM
Registered User
Maybe just move the canopy or slight redesign to take care of flybar strikes. I second the low cost and durability routes versus any other options.

Here is pic of mod moving canopy. Greatly reduced but did not eliminate flybar strikes, but at least I can fly it aggressively now and any strike doesn't cause out of control like before. In fact on other side black paint is gone where flybar hit and I've had it 1 week. Some aggressive flights now I get no strikes, where before it was almost unflyable in high rates outside.

Moved canopy back and down a little, added grommets.
May 14, 2012, 12:54 PM
Registered User
MassiveOverkill's Avatar
Quote:
Originally Posted by Hayabusa Heli View Post
Do not over lubricate the main blade pivots ... it will cause the heli to "shudder". This was something I discovered a while ago, and posted about it then.
Unless you use pencil graphite, which is what I do.
May 14, 2012, 01:01 PM
RC beginner
Quote:
Originally Posted by Apphoard View Post
+1 on that I'm in also.
pick me! pick me! (eddie murphy voice) no fake positive review here. in fact if they send me 9 new helis ill guarantee a bad review!
May 14, 2012, 01:21 PM
Brosol
Brosol's Avatar
Quote:
Originally Posted by jpconard View Post
Maybe just move the canopy or slight redesign to take care of flybar strikes. I second the low cost and durability routes versus any other options.

Here is pic of mod moving canopy. Greatly reduced but did not eliminate flybar strikes, but at least I can fly it aggressively now and any strike doesn't cause out of control like before. In fact on other side black paint is gone where flybar hit and I've had it 1 week. Some aggressive flights now I get no strikes, where before it was almost unflyable in high rates outside.

Moved canopy back and down a little, added grommets.
This is why I swtiched to the Solo Pro canopy. It weighs less and has a lower profile than the stock V911 canopy allowing even more flybar clearance.

Maybe a combo of repositioning, a lower profile canopy, stiffer grade flybar plastic, shorter flybar might be easiest method to help reduce or eliminate flybar strikes during aggressive high rates flying if the CF rod option is a no go.
Last edited by Brosol; May 14, 2012 at 02:49 PM.
May 14, 2012, 01:28 PM
Registered User
Quote:
Originally Posted by jameschen072 View Post
Anyways, want to guess what the new models might be? :P
I'm hoping for a cheap quad.
May 14, 2012, 01:37 PM
Brosol
Brosol's Avatar
Quote:
Originally Posted by derelicte View Post
I'm hoping for a cheap quad.
That would be so sweet if it can bind to my FS-TH9X 9x Tx.
May 14, 2012, 01:39 PM
mCP-X, mSR, 9958, v911, DX6i
Luftwaffel's Avatar
Quote:
Originally Posted by jameschen072 View Post
anyways, want to guess what the new models might be?
Flybarless!
May 14, 2012, 01:41 PM
Brosol
Brosol's Avatar
Quote:
Originally Posted by jameschen072 View Post
Greetings fans of the V911!
I received a box today about the size of a mini fridge!! And in it I found 9 V911s!!! Called the owner to see what it was about and he said it was his way of saying "thank you" for the demonstration video I made for him at the Beijing RC show... was very surprised :P
:P
Wow nine V911s. Are you going to try to fly them all at once?
May 14, 2012, 01:53 PM
It flies!!! ... so who cares ?
erdnuckel2's Avatar
Quote:
Originally Posted by Brosol View Post
I also prefer making the CF flybar as a single solid piece as well. As I previously mentioned IMHO the XTreme flybar is not good example of how strong a CF flybar can be due to its design: 2 pieces of CF Rod glued to a weak plastic hub. Adding heavier flybar weights makes the problems worse.
And HOW would you want to make this a 1-piece flybar?? I highly doubt this is even possible ...,
Latest blog entry: Random Pictures ...


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Jiuchon 9C002, a Solo Pro clone? SoloProFan Micro Helis 103 Feb 29, 2012 02:24 PM
Discussion Interesting Solo Pro? Clone gordonzo Micro Helis 46 Nov 30, 2011 03:15 AM
Question Which 100 sized heli after Solo Pro? Tuc Micro Helis 16 Jun 13, 2011 01:52 PM
Sold $100 !NEW ARF Storm 250 (Trex Clone) With Align Upgrades, Tons of Extras! $100!! RChelisrule Aircraft - Electric - Helis (FS/W) 1 May 31, 2011 12:26 AM