Flydumini Frame Build Log - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by nasgul, who may elect to delete unwanted replies.
Nov 29, 2011, 07:15 PM
Registered User
nasgul's Avatar
Build Log

Flydumini Frame Build Log


This is for my flydumini frame/fc build........

Quality is excellent, and nice and light, considering it's 2.6mm thickness! So far i have soldered the pins and the arduino pro mini, which i also got from flyduino.com (thanks to paul bake).
Wii motion plus going to be used on this, along with the following.....

Turnigy plush esc's (either 6a or 10a, undecided as yet)
Hk 2000kv 10g motors or c10's
BMA020
Orange rx
5x3 3 blade or 2 blade props

Build log updated regularly........

Wii motion plus now soldered and fitted to the flydumini, starting to get there slowly, lol.
I used sellotape outdoor foam sticky tabs to affix wmp to the frame. The advantages are twofold. Firstly, they are very sticky, so no fear of gyro coming loose! Secondly, the foam they are made from is very good at absorbing vibrations, used many times on my multi's and heli's, wont use anything else now for affixing gyro's or securing servo's
Last edited by nasgul; Dec 03, 2011 at 08:02 AM.
Sign up now
to remove ads between posts
Nov 30, 2011, 04:51 PM
Registered User
Huckabilly's Avatar
That is so cool! I just started getting into quads. I like the way the frame is the circuit board. Makes for a very tidy setup.
Nov 30, 2011, 05:46 PM
Registered User
nasgul's Avatar
Thanks huckabilly! It's one of my first venture's into multiwii/flyduino, and it's pretty straight forward, very simple to assemble.
Going to use wii motion plus gyro, and BMA020 accellerometer, along with orange 6ch rx. I shall be updating the post regularly, along with how-to sections, as i progress.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Flydumini Frame Thread and Build Hints/Help nasgul Multirotor Drone Talk 216 Sep 28, 2013 04:58 PM
Discussion Arducopter 3dr new carbon frame build log ezmobius Multirotor Drone Talk 0 Oct 01, 2011 06:44 AM
Build Log "MK" V 1.35 on a 575mm Homemade frame Build Log RChelisrule Multirotor Drone Talk 4 May 30, 2011 08:57 PM