Thread Tools
Old Feb 14, 2012, 11:23 PM
THESANDMAN is offline
Find More Posts by THESANDMAN
Registered User
THESANDMAN's Avatar
Quote:
Originally Posted by lkagan View Post
No, it won't.

No, it's another brand.

You can get this receiver that works with Spektrum transmitters. I have over 10 of them that I use with my DX6i and my DX8. I never had an issue.

Larry
i use those as well ,but ive had three brown outs with them. i sstarted to use a voltage regulator along with them . "you just plug into any open channel " it stores enough volts to help the reciever in case of a brown out and havent had anymore issues with them. i h
Sign up now
to remove ads between posts
Old Feb 14, 2012, 11:30 PM
erkq is online now
Find More Posts by erkq
Registered User
Quote:
Originally Posted by THESANDMAN View Post
i use those as well ,but ive had three brown outs with them. i sstarted to use a voltage regulator along with them . "you just plug into any open channel " it stores enough volts to help the reciever in case of a brown out and havent had anymore issues with them. i h
Brown outs on 3S systems? Do you have a link to the regulator? It must have a capacitor in it.
RCG Plus Member
Old Feb 14, 2012, 11:38 PM
lkagan is offline
Find More Posts by lkagan
Registered User
lkagan's Avatar
Quote:
Originally Posted by queadlunnrau View Post
For hovering, if you had 1 gyro where would it help you most? Rudder or ailerons?
Definitely the rudder. Putting one the ailerons helps avoid a gust of wind pushing down a wing or achieving more stability for taking smooth onboard video.

Larry
Old Feb 14, 2012, 11:48 PM
lkagan is offline
Find More Posts by lkagan
Registered User
lkagan's Avatar
Quote:
Originally Posted by THESANDMAN View Post
i use those as well ,but ive had three brown outs with them. i sstarted to use a voltage regulator along with them . "you just plug into any open channel " it stores enough volts to help the reciever in case of a brown out and havent had anymore issues with them. i h
Are you sure it was a brown out and not a temporary loss of reception? Just curious because I went through this and realized that reception was being blocked by the carbon fiber frame of my heli and in another case touching the carbon fiber frame attached to a tail boom that had generated static electricity from the belt. These were some of the most trickiest issues I ever had.

Larry
Old Feb 15, 2012, 09:14 AM
Tim H. is offline
Find More Posts by Tim H.
FoamyFactory.com
Tim H.'s Avatar
Quote:
Originally Posted by FlyWW1 View Post
How much would you charge to cut me some Python graphics or send me the files?
Thanks!
Not sure yet... I need to find the files and see what I can come up with. That project was several years ago and I need to re-do the files. They were originaly done for decals, so vinyl files will be completely different. However, here's a link to my old Python thread. The decal files are there. https://www.rcgroups.com/forums/showthread.php?t=528756 Post 26. On a sidenote. I did obtain permission from the Kimbals to use the Python logo on my foamy Python. All of the artwork is original artwork done by me. As far as I know, I was the only "Foamy" to be given permission to use the name and logos. Since the graphics were posted before in my Python thread, I'll just repost them here.

I have more extensive files, but that'll get you going if you want to print decals. The white areas on the red plane will present a challenge though. Printing on white paper may be the best option. I'll have to do some manipulating.

For those with a vinyl cutter, you can resize the PDF easily in your cutting software.

Just got shipping confirmation from Nitro Planes. It's on it's way! Woo Hoo...

Cheers!
RCG Plus Member
Last edited by Tim H.; Feb 15, 2012 at 05:44 PM. Reason: artwork notes
Old Feb 15, 2012, 09:41 AM
rcninja is offline
Find More Posts by rcninja
Registered User
Quote:
Originally Posted by lkagan View Post
Are you sure it was a brown out and not a temporary loss of reception? Just curious because I went through this and realized that reception was being blocked by the carbon fiber frame of my heli and in another case touching the carbon fiber frame attached to a tail boom that had generated static electricity from the belt. These were some of the most trickiest issues I ever had.

Larry
Good question. I was wondering what the range is on the orange rcvr with such a short antenna.
Old Feb 15, 2012, 09:55 AM
FlyWW1 is offline
Find More Posts by FlyWW1
Registered User
FlyWW1's Avatar
Quote:
Originally Posted by Tim H. View Post
Not sure yet... I need to find the files and see what I can come up with. That project was several years ago and I need to re-do the files. They were originaly done for decals, so vinyl files will be completely different. However, here's a link to my old Python thread. The decal files are there. https://www.rcgroups.com/forums/showthread.php?t=528756 Post 26

I have more extensive files, but that'll get you going if you want to print decals. The white areas on the red plane will present a challenge though. Printing on white paper may be the best option. I'll have to do some manipulating.

For those with a vinyl cutter, you can resize the PDF easily in your cutting software.

Just got shipping confirmation from Nitro Planes. It's on it's way! Woo Hoo...

Cheers!
Thanks! I have a vinyl cutter but I have never done more than just one color. I'll have to tinker with it I guess. I plan on painting all the red to yellow and painting the white to silver like the real Python. The Python and Beast are my favorite planes and I already have a Beast so I must have the Python
Old Feb 15, 2012, 09:59 AM
lkagan is offline
Find More Posts by lkagan
Registered User
lkagan's Avatar
Quote:
Originally Posted by rcninja View Post
Good question. I was wondering what the range is on the orange rcvr with such a short antenna.
There is a few videos of people doing range tests on YouTube. The conclusion is that you'll never have to worry about range with park flyer sized aircraft while keeping it close enough to see. But the ranges are not consistent from one receiver to the next.

Larry
Old Feb 15, 2012, 10:13 AM
Tim H. is offline
Find More Posts by Tim H.
FoamyFactory.com
Tim H.'s Avatar
Quote:
Originally Posted by FlyWW1 View Post
Thanks! I have a vinyl cutter but I have never done more than just one color. I'll have to tinker with it I guess. I plan on painting all the red to yellow and painting the white to silver like the real Python. The Python and Beast are my favorite planes and I already have a Beast so I must have the Python
Do a YouTube search on "2 color vinyl decal" or similar. You'll find several very good videos that take you step by step on how to do it. I LOVE Youtube for finding "How To" stuff.

Post some pics when you get some cuts. I may fiddle around with it this weekend. I need to get some vinyl too. I'm out of white. Below is a pic of the vinyl I did for my 45" Sbach 342 scratch build and the graphics file I used to create the vinyl. The hardest bart was sizing. I'll probably never do large decals like that again. The black fuselage pieces were a pain!

Cheers
RCG Plus Member
Last edited by Tim H.; Feb 15, 2012 at 10:14 AM. Reason: Added files
Old Feb 15, 2012, 11:54 AM
JGuilty13 is offline
Find More Posts by JGuilty13
Registered User
JGuilty13's Avatar
Tim, the Sbach looks great....what kind of vinyl are you using? 3M, Shinerite and Orafoil would all be good choices.
Old Feb 15, 2012, 12:30 PM
lkagan is offline
Find More Posts by lkagan
Registered User
lkagan's Avatar
It looks like those of us who got the ARF got lucky, they're already sold out! http://www.nitroplanes.com/60a-dy894...s-red-arf.html
Old Feb 15, 2012, 12:37 PM
JGuilty13 is offline
Find More Posts by JGuilty13
Registered User
JGuilty13's Avatar
Awesome lol.....mine is showing its still on track for delivery today!
Old Feb 15, 2012, 01:26 PM
queadlunnrau is offline
Find More Posts by queadlunnrau
Luck is my skill
queadlunnrau's Avatar
Quote:
Originally Posted by lkagan View Post
It looks like those of us who got the ARF got lucky, they're already sold out! http://www.nitroplanes.com/60a-dy894...s-red-arf.html
Thank my lucky stars I got in b4 stock ran out, loving this plane sooooo much.
Old Feb 15, 2012, 01:37 PM
krexken is offline
Find More Posts by krexken
smoke is my wattmeter
Need more video! Curious how it will stand up to violent maneuvers. Naturally I'm a day late and a dollar short on the sale.
Old Feb 15, 2012, 01:40 PM
Bloosee is online now
Find More Posts by Bloosee
SoCal fair weather flyer
Bloosee's Avatar
So glad i pulled the trigger last night

Debated all day over that 14% discount. Finally consulted the wife an she said "order it". I love how my wife supports my hobbies

I bet they raise the price to $149 when they come back in stock.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Eflite Pitts Model 12 Arfrm,BNF,PNP Any way navihawk Aircraft - Electric - Airplanes (FS/W) 6 Nov 14, 2011 07:35 PM
Found 4s 2200 mAh lipo for my Pitts Model 12 stwaller12 Aircraft - Electric - Batteries & Chargers (FS/W) 0 Sep 15, 2011 06:54 AM
Build Log Peak Model 50cc Pitts Model 12 Biplane Electric Conversion maverickma Giant Electric Planes 228 Sep 09, 2011 09:23 AM
Sold E-Flite Pitts Model 12 15e Biplane milehigh club Aircraft - Electric - Airplanes (FS/W) 5 May 19, 2011 09:08 PM
Discussion Goldberg ARF Pitts P-12 (model 12) IronKnees Fuel Plane Talk 12 Jan 08, 2007 11:33 AM