View Poll Results: What forum should the build thread for the Horten VII in?
Leave it here in Giant Electric Planes. 26 72.22%
Move it to the new Nurflügel forum. 10 27.78%
Voters: 36. You may not vote on this poll

Thread Tools
Sign up now
to remove ads between posts
Nov 30, 2011, 11:11 AM
Designing something...
So is there any interest in this plane here? I guess I can post in the Flying Wings or Scale Electric Planes forums.

Brian
Nov 30, 2011, 11:59 AM
Registered User
Ducky22's Avatar
I am very much interested in it. If you do plan on moving it to another branch, please let me know.

Thanks.
Nov 30, 2011, 01:09 PM
Registered User
matthew73's Avatar
Very interested. Keep us posted. Cheers.
Nov 30, 2011, 03:13 PM
Designing something...

More progress on the CAD design


I've managed to get some more work done on the CAD Design. The basic wing ribs with leading edge, joiner holes and spar slots are done. Getting the spar placement right was difficult. I ended up using to 1" X 36" aluminum joiner tubes--anything larger in diameter or longer just wouldn't fit!

Next up...
Drawing the ribs and bulkheads for the center section.
Drawing the rest of the sub-leading edge parts.
Drawing the shear webs.
Drawing the flap and elevon skins.

Please let me know if there are any questions.

Thanks,
Brian
Dec 01, 2011, 04:02 AM
Registered User
wizard of odd's Avatar
It looks like a very interesting and ambitious project. Please keep posting.

Odd
Dec 02, 2011, 05:09 AM
Registered User
Peter V's Avatar

2.4 Horten VII


Hello Brian,

interested also.

do you know this site? http://www.modelbouwforum.nl/forums/...orten-vii.html
Apart from the building and flying, at the end, there are some pictures of the landinggear

greetings
Peter
Dec 02, 2011, 07:06 AM
Designing something...
@Peter - This discussion is definitely a good candidate for the proposed Nurflügel forum. When that happens I'll probably move it there. Also, thanks for the link. I did know about the site. It was my second link under other Horten VII builds listed above.

Brian
Dec 02, 2011, 07:33 AM
Registered User
I hope you keep posting on RC Groups. I was looking forward to the rest of this thread
Dec 02, 2011, 07:50 AM
Designing something...
@Chuck - I still plan to post here on RCG just possibly under a new forum. Take a look here: https://www.rcgroups.com/forums/show....php?t=1547670 and vote if you'd like.

Thanks,
Brian
Dec 02, 2011, 09:26 AM
less is more
Knoll53's Avatar
Quote:
Originally Posted by cpdude View Post
I've managed to get some more work done on the CAD Design...Please let me know if there are any questions.
Thanks,
Brian
So I trust that you have incorporated the the twist into the model at this point. When laying out the spar caps, do you twist them along with the chord or leave them vertical?

Kent
Dec 02, 2011, 09:41 AM
Retired CAD guy
birdofplay's Avatar
I am curious about the REAL aircraft's Props.

What is the purpose of those small multiblade "fans" ?

Vas ist
Dec 02, 2011, 09:57 AM
Designing something...
Quote:
Originally Posted by Knoll53 View Post
So I trust that you have incorporated the the twist into the model at this point. When laying out the spar caps, do you twist them along with the chord or leave them vertical?

Kent
Yes, the twist [via the Nurflügel program] has been incorporated into the model. I leave the spar caps vertical--no twist!

Brian
Dec 02, 2011, 10:02 AM
Designing something...
Quote:
Originally Posted by birdofplay View Post
I am curious about the REAL aircraft's Props.

What is the purpose of those small multiblade "fans" ?

Vas ist
That's a very good question. There is some talk about them here. If I'm reading it correctly they seem to be used to "power" the movement of the propeller blades (i.e. setting the pitch of the blades). That makes sense to me.

Brian
Dec 02, 2011, 09:05 PM
Designing something...
Well, I managed to get some of the items listed in post #5 completed. I'm done with the sub-leading edge parts and the main shear webs. I've started the center section ribs and bulkheads, as well as, the control surface skins, but, I still have a bit of work to do on these.

I was slowed down a bit because things needed to be moved and/or resized a bit in the center section. I moved the main gear retracts a little further up into the center section because the wheels weren't going to retract fully inside the wing. This in turn meant I needed to reduce the size of the wing joiner tube from a full 1" to 7/8".

I also had clearance issues between the prop shafts and the front wing joiner tube. Reducing the side of the joiner tubes helped but in the end I had to make a slight change to the angle of the prop/prop shaft. I did this by moving the motors higher up by about 4-5mm while leaving the center of the propellers in the same position.

On a positive note. I did managed to complete the design of all main wing panel ribs including all of the lightening holes and alignment tabs.

I just need to remember that two steps forward and one step back is still forward progress.

I'll try to post more pictures later.

Brian


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log 4.1 meter (1/5 scale) Horten IIIe cpdude Scale Sailplanes 408 Mar 05, 2016 01:45 AM
Build Log 2 Meter Horten XII cpdude Flying Wings 350 Mar 04, 2013 08:46 AM
Build Log RJF Horten-Beluga 1/4 andrecillo76 Scale Sailplanes 51 Dec 26, 2011 11:18 AM
Wanted 2 meter 2.4 friendly slope glass ship. kilgoretrouts Aircraft - Sailplanes (FS/W) 0 Oct 06, 2011 02:11 PM
Sold ***Shark XL Strong 4.5 meter 2.4 safe RTF*** Sky Angels Aircraft - Sailplanes (FS/W) 7 Sep 21, 2011 12:19 PM