Thread Tools
Old Apr 11, 2012, 09:59 AM
Dereck is offline
Find More Posts by Dereck
Visitor from Reality
Nice one Ray. WIll have to print those out - I don't have anything but memories of my Hotpot 54. The guy who got me interested in RC back then lent my an ENYA 19 RC glow engine, which I cowled up like the original's I flew the model for around three years, even though I got onto low winged aerobatics and scale, the Hotpot was still fun. For the latter part, it had an interesting kink in the fuselage.

I crashed it - what a surprised - and broke the longerons aft of the wing. So, sawed off the broken parts, leaving me with the fuselage forward of the wing TE and the bit around the tailfeathers. Made up a new pair of part sides from strip balsa to replace the missing bit and, very carefully, joined all three together. Flew fine, though instead of the curved fuselage longerons in side view, it had this straight line bit in the back end!

In the end, it went to a clubmate. He cut the oil-soaked cowl and firewall off and built a short 'wing' across the nose with a 10 glow on either end, rather like that 70's era Dornier light transport. I moved on before that happened, but by all accounts, it flew just fine as a 'twin'.

Cute bit. Many years later, when I'd settled into writing my electric flight column in Q&EFI (which is always in need of contributions from US based aeromodellers, just in case anyone's reading ) Mr. Milford contacted me for advice as to how to transition to electric power from smelly lumps.

Funny old world at times. Hotpot 54 is a lovely model, too young for this build-off, but would make a delightful electric powered model with that cowled in front end.

D
Sign up now
to remove ads between posts
Old Apr 11, 2012, 01:47 PM
P_J_Glor is offline
Find More Posts by P_J_Glor
Registered User
P_J_Glor's Avatar
a lovely RCM&E published design called 'Hotpot 54'
Quote:
Originally Posted by RFJ View Post
Couldn't resist it

Ray
Is that Hotpot article and Plan in the Vintage Plans thread? If not, would love to see a .pdf posted.

Pete G.
Old Apr 11, 2012, 03:12 PM
RFJ is offline
RFJ
Find More Posts by RFJ
RFJ
Registered User
RFJ's Avatar
Hope not Pete as I believe that thread is for pre 1960 designs. Hot Pot was published in 1976.

Ray
Old Apr 12, 2012, 11:13 PM
Dereck is offline
Find More Posts by Dereck
Visitor from Reality
Hotpot 54 - try Www.myhobbystore.co.uk That's the plans service part of RCM&E etc.

Okay, will shut up after this, until I have photos etc.

Found my ancient copy of the Aeromodeller Chatterbox plan! Intend to build one. Next decision - full size, 150%, or twice life size?

Sorry folks - it will be electrically impelled. May have to learn how to make a dummy Mills. Yes, there will be a thread when I have something to mumble about. Shouldn't take long to build, especially if I go with 'full size'. Be easier to find an electric friendly spinner at full size too...

D
Old May 31, 2012, 04:51 AM
atesus is offline
Find More Posts by atesus
Registered User
atesus's Avatar
I meant to build this beautiful glider from Frank Zaic for easily a couple years now. It turns out this build-off was the motivation I needed to get started. I'm in with my Thermic 50x (from 1946) R/C conversion. I'll build from an Aerosente short kit.

https://www.rcgroups.com/forums/show....php?t=1662463

You gotta love a glider with a fin like that .
Old Jun 01, 2012, 12:38 AM
czirh is offline
Find More Posts by czirh
Use your imagination....
czirh's Avatar
Nice project Ateş, I love gliders...

Cem
Old Jun 01, 2012, 07:38 AM
orange&white is offline
Find More Posts by orange&white
Scott R/C Time Pilot
orange&white's Avatar
atesus

You are in the 2012 OT Build Off, good luck.

Scott
Old Jul 26, 2012, 05:52 PM
madbomber is offline
Find More Posts by madbomber
Hatters gonna hat.
madbomber's Avatar
Bimpity Bampity Bump.

Hoping that everyone remembers this contest. Looks like its been nearly 2 months without a new entry.
Old Jul 28, 2012, 05:04 PM
albyone is offline
Find More Posts by albyone
Albyone
albyone's Avatar
Toc! Toc!
You can participate with this?

https://www.rcgroups.com/forums/show....php?t=1691531

Ciao

Albyone
Old Jul 29, 2012, 04:08 PM
orange&white is offline
Find More Posts by orange&white
Scott R/C Time Pilot
orange&white's Avatar
Yes albyone, you can participate with this model. Good luck.

Scott
Old Jul 29, 2012, 04:09 PM
albyone is offline
Find More Posts by albyone
Albyone
albyone's Avatar
Thanks!

Albyone
Old Aug 17, 2012, 05:23 AM
mewert is offline
Find More Posts by mewert
Team Armattan
mewert's Avatar

84" Quaker from Model Builder plans


I would like to get in on the 2012 buildoff if I can. Although I'm already finished with the build last week. If not, I will just have to do another.
What do you think? Thanks
Old Aug 19, 2012, 07:39 AM
orange&white is offline
Find More Posts by orange&white
Scott R/C Time Pilot
orange&white's Avatar
Hi mewert

Of course you can join in and enter. Please start a build log showing building, finishing and flying you model. Then link your build log to the contest thread. I will put you in the first page with the rest of the entrants. Good luck.

Scott
Old Aug 19, 2012, 09:31 AM
Sundancer is offline
Find More Posts by Sundancer
I like real wooden aeroplanes!
Sundancer's Avatar
Hi Scott

A couple of my builds for the Britkit which I would also like to add to the entries for the main build off please:

Keil Kraft Sportster 1.8x https://www.rcgroups.com/forums/show....php?t=1647480

Mercury Mars 2x build log https://www.rcgroups.com/forums/show....php?t=1685494

Thanks

George
Old Aug 20, 2012, 06:12 AM
orange&white is offline
Find More Posts by orange&white
Scott R/C Time Pilot
orange&white's Avatar
Beautiful models George, good luck.

Scott


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Contest The 2011 Vintage and Old-Timer Build Off orange&white Vintage & Old-Timer Designs 197 Dec 01, 2011 06:20 AM
Poll VOTING for The 2011 Vintage and Old-Timer Build Off orange&white Vintage & Old-Timer Designs 9 Nov 30, 2011 12:57 PM
Discussion Vintage & Old-Timer kit ideas for laser cutting zbrubaker Vintage & Old-Timer Designs 39 Aug 25, 2011 09:32 PM