Not sure if this is right place to post but crashed my hughes 450 today, The power went and It just dropped out the sky nose first. GUTTED !! Luckily the only thing that got smashed was the front window so i decided to try and make my own. Which was a success
Heres how i did it. I tapped up the holes in the window and the filled it with plaster moulding powder. While it was going off i made a vacuum former then a wood frame which i attached the sheet of plastic to. (The pictures should explaine it more better than i can) I put the frame with the plastic sheet under the grill untill it was nice and soft, And then switched the hoover on and bingo it worked
brand new window and the whole thing cost me nothing, Just used bits and stuff lying around my shed. I post pictures if anyone has any suggestions on what i could have done better please leave your feed back or if you have questions for me. Have a good day
One thing make sure to check your battery solder joints mine had snapped and this is why i lost power !!