48" KFm-4ward scratchbuild - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by GooberSB, who may elect to delete unwanted replies.
Nov 24, 2011, 08:59 PM
An Ordinary User

48" KFm-4ward scratchbuild

I built a KFm-4ward on yesterday and just flew it today.

I put a ExceedRc Rocket motor on it with a 7x5 Master Airscrew prop and a 1800mah 3S lipo. This setup gives me over 200W at 20-25A. The motor can take 30A but max efficiency is only up to 18A. Balances nice and flies smooth on low rates. In this video I'm flying at 50% aileron and 60% elevator so it flares nicely at low speed landings as you can see at the end of the video. On high rates (100% throw) it will turn on a dime but I don't want that much throw when getting to know my planes.

It is a gentle giant on low rates and very maneuverable on high rates.

Here's a video of todays flight and some pictures

48" KFm-4ward (3 min 57 sec)

This is a nice flyby filmed Dec 17
KFm-4ward flyby (2 min 0 sec)
Last edited by GooberSB; Dec 19, 2011 at 01:49 AM.
Sign up now
to remove ads between posts
Nov 25, 2011, 04:41 AM
Registered User


flys not to bad

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log KFm-4ward 48" wing ombudsman Flying Wings 93 Nov 24, 2012 11:09 PM
Discussion Experiments with KFm airfoil on 'Elf' DLG glider JetPlaneFlyer Foamies (Scratchbuilt) 118 Jul 01, 2012 12:46 AM
Discussion KFm airfoil 48" Flying Wing gatorlynch SPAD - Simple Plastic Airplane Designs 31 Jun 04, 2012 08:38 AM