Thread Tools
Nov 15, 2011, 10:38 PM
just a rumour
Drusky's Avatar
Discussion

StevensAero - re-Run™


I really like the lines of this little chuck glider from Stevens Aeromodels. It has a classic charm.


Forgive the videography. It was a bit silly of me to maiden and record at the same time. I think the model is a bit nose heavy.
P1100156 (1 min 9 sec)


The fuselage is made up of three slabs of balsa. The middle one can be cut out to accept your 1s Lipo and micro receiver. Servos can be mounted as you see fit.
Last edited by Drusky; Nov 15, 2011 at 11:39 PM.
Sign up now
to remove ads between posts
Nov 15, 2011, 11:18 PM
Team Hitec, Customer Support
Xpress..'s Avatar
That's awesome. I could slope off of ant farts.
Nov 16, 2011, 12:52 AM
Springs soarer
THat is awesome!!! Bill really has some great planes.. I now need to go get one of these..
Nov 16, 2011, 02:22 AM
Brett
bjaffee's Avatar
That is cool. The Stevens Aero kits are great.
Nov 16, 2011, 06:01 AM
just a rumour
Drusky's Avatar
This is the first balsa kit model I have ever built. It went together in an hour, faster than any arf I've built. Be sure to read the instructions carefully and then think about the required action before applying superglue. I made one or two silly mistakes that simply could not be undone, fortunately they were not significant errors

The kits are very inexpensive and come with a coin for ballast (moneyback scheme ).

The wing is undercamber and I set cg halfway along the rib closest to the fuselage. If I did this again I would buy two kits. One built as a chuck glider could be used to determine CG.

I see more balsa in my future.
Nov 21, 2011, 09:01 PM
Registered User
Tick Point's Avatar

pardon me


bungee maybe?
whats your Rx system? JR compatible?72mhz

i want a wrist-rocket style launch, micro thermal riding machine.
Have you found it?

I'd begin to design one if I had the radio gear. What's it take?

Dave
Nov 23, 2011, 02:02 PM
just a rumour
Drusky's Avatar
Hi Dave,

I wouldn't call the result a thermal machine but it slopes quite nicely.

Gear is as follows:

2 of these: http://www.hobbyking.com/hobbyking/s...dProduct=17540


1 of these: http://www.hobbyking.com/hobbyking/s...dProduct=18827


1 of these: http://www.hobbyking.com/hobbyking/s...dProduct=11874


I look forward to seeing your design

Andrew
Nov 25, 2011, 12:10 PM
Registered User
Tick Point's Avatar
Thanks for the referrals, Andrew. Great prices for each($10Rx, $2batt,$3servo). I'd have to pick up a 2.4ghz Tx, and didn't see a combo available from HobbyKing.
My interest is in building a "low" performance 2ch glider that JrHigh students could build and launch with a small bungee. We have no slope, but would enjoy a short flight, with maybe a loop before touchdown.
My search continues, and I thank you for sharing your design.
Would it handle a bungee launch (light weight elastic cord from the fabric store) or maybe a tow launch from running students?
Nov 25, 2011, 02:18 PM
just a rumour
Drusky's Avatar
Not my design Dave. You should consider something like the Fling by Great Planes. Side arm launch type glider would be better in my opinion.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold StevensAero SPORTstik slogo Aircraft - Electric - Airplanes (FS/W) 1 Nov 18, 2011 06:54 AM
Mini-Review A Look at StevensAero MR.hooha Electric Plane Talk 26 Jul 15, 2011 08:42 PM
Wanted StevensAero - Dystraction forsakenrider Aircraft - Electric - Airplanes (FS/W) 2 Jun 13, 2011 08:37 PM
Wanted Stevensaero Micro Shaft yood Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 0 May 17, 2011 01:20 PM
Sold Micro Re-run glider toxic-trip Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 1 Mar 07, 2011 03:25 PM