Thread Tools
Old Dec 13, 2011, 04:27 AM
FE Obsessed is offline
Find More Posts by FE Obsessed
Flight Surgeon
FE Obsessed's Avatar
Thanks for the help widelec,

Just to echo Wiseduck's observation, I think you need to mirror the 45mm holes on the bottom deck too so you can fit the nylon spacers straight through.

And rather than supply spare top and bottom plates, add a pair of enlarged ones to suit bigger boards, this will give you a larger base to land on too...

Maybe I should just order a V2 kit if you can include these revisions and keep the current one as spares?

Nice quality frame though, good stuff
Sign up now
to remove ads between posts
Old Dec 13, 2011, 06:41 AM
Widelec is offline
Find More Posts by Widelec
Simple is the best
Thanks for your suggestions. (wiseduck,FE_Obsessed and scousethief )
I will add 45mm hole 2 plate (upper and bottom) to new kits.
It's will be spare part and avaible for miniquad owners
Old Dec 13, 2011, 06:46 AM
Drekavac is offline
Find More Posts by Drekavac
QuaDreko pilot :)
Drekavac's Avatar
Please, pack this revised parts for us, old customers too. I will ofcourse pay for updated parts.
When I look closely yesterday, i saw that there are no 45 holes on upper plate. In this way I can not put it together...
And enlarged electronic-saver plates too, ofcourse.
Old Dec 13, 2011, 07:49 AM
David Jenkins is offline
Find More Posts by David Jenkins
Registered User
David Jenkins's Avatar
Quote:
Originally Posted by FE Obsessed View Post
I (stupidly) tried to clean the glue residue from the tape you secured the top and bottom decks together with some acetone, the polycarbonate did not like that at all and clouded over and started cracking!
Most hardware shops in the UK sell stuff with a name like "Sticky Stuff Remover" which is really good for removing residue left by tape & labels without damaging what's underneath. Smells a bit like orange zest...
Old Dec 13, 2011, 07:03 PM
scousethief is online now
Find More Posts by scousethief
Registered User
scousethief's Avatar
Hi Widelec , that is good news , can you also supply an extra 4 of the centre section spacers as these will be perfect for fitting a 2 cell underneath.

upgrade kit :
2-3 plates for electronics with holes for 50mm flight board
1x4 10mm spacers for the very bottom which will make a perfect bay for 2 cell batts

thank you.
Old Dec 15, 2011, 06:33 AM
David Jenkins is offline
Find More Posts by David Jenkins
Registered User
David Jenkins's Avatar
My kit arrived this morning... very nice... very nice indeed!
Old Dec 15, 2011, 06:47 AM
WiseDuck is offline
Find More Posts by WiseDuck
Mmmmmmm!
WiseDuck's Avatar
So what batteries do people use for this thing? I ordered two different 2-cell batteries off Hobbyking, I went for the lightest 2S batteries I could find and it looks like they won't exactly fit below the frame. I haven't checked yet, but I know roughly how wide the battery plates are and the 1000mah battery definitely won't fit. Not sure the 800mah one will either.
Old Dec 15, 2011, 07:49 AM
scousethief is online now
Find More Posts by scousethief
Registered User
scousethief's Avatar
ive got 800 mah 2 cell generic 20c batts here that will fit side ways (tight but they'll fit~) IF i can get the 50mm plates and some 10mm spacers the batts will fit perfectly flat.
Old Dec 15, 2011, 08:00 AM
tashley is offline
Find More Posts by tashley
Aerial Images of Texas
tashley's Avatar
In the USA the product you want to remove all sticky residue I've tried it on is "Goo Gone". It's widely available and it too smells like a citrus derivative.
Old Dec 15, 2011, 08:15 AM
tashley is offline
Find More Posts by tashley
Aerial Images of Texas
tashley's Avatar
So the Mini wii board has self leveling built in. Where do you buy that board?
Btw, thanks for all the help, I'm looking forward to receiving my kit. ;-)
Old Dec 15, 2011, 08:17 AM
Dialfonzo is offline
Find More Posts by Dialfonzo
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by tashley View Post
So the Mini wii board has self leveling built in. Where do you buy that board?
Btw, thanks for all the help, I'm looking forward to receiving my kit. ;-)
here

but you will have to wait for next batch... they sell fast
RCG Plus Member
Old Dec 15, 2011, 01:30 PM
tc3wins is offline
Find More Posts by tc3wins
Multirotor Builder!!!!!
Recieved my mini quad frame today. hope t have it built up this weekend.

Ok update. I opend the package. everything looks good, but doesn't seem like there is enough hardware to build the frame. so what I need to know are these M3 or 4-40 threads. I am going to need to get more screws and nuts , and some more shorter standoffs. mine came with a bunch of long standoffs.
Last edited by tc3wins; Dec 15, 2011 at 01:53 PM.
Old Dec 15, 2011, 07:50 PM
scousethief is online now
Find More Posts by scousethief
Registered User
scousethief's Avatar
If anyone finds a link for the stand offs could they post it please.
Old Dec 15, 2011, 08:18 PM
daign is offline
Find More Posts by daign
My RC builds in my profile.
daign's Avatar
Quote:
Originally Posted by Widelec View Post
I like this blue led circle.
85mm inner diameter good for my quads



Attachment 4467449
The mini Quad needs to be 75mm or less to fit the frame.
Old Dec 15, 2011, 08:19 PM
daign is offline
Find More Posts by daign
My RC builds in my profile.
daign's Avatar
I want to dye the nylon for this build but have no idea where to get RIT dye.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion BambuCopter *BlueBird QuadCopter, BlueBird TriCopter* SmallQuad 450 AirFrames Widelec Multirotor Talk 343 May 25, 2013 04:00 PM
Discussion HK has a new mini quad frame Pintac Multirotor Talk 20 Sep 28, 2011 11:04 AM
Sold Quad frame for sale!!! previously listed. as full quad. tc3wins Aircraft - Electric - Multirotor (FS/W) 3 Aug 25, 2011 09:56 AM
Sold Mini Quad with G10 frame RXR tc3wins Aircraft - Electric - Multirotor (FS/W) 4 Jul 22, 2011 12:05 AM