Thread Tools
Dec 09, 2011, 04:18 PM
Simple is the best
Quote:
Originally Posted by Quad_Addict
i see deja vue every day...
.............
should see a doctor
Sign up now
to remove ads between posts
Dec 09, 2011, 04:25 PM
Suspended Account
Quote:
Originally Posted by Widelec
should see a doctor
its true i keep seeing duplicates

eye doctor
Dec 09, 2011, 04:45 PM
Simple is the best
Good night Quad-Addict
I'm going to sleep. Too late here...
Dec 09, 2011, 04:50 PM
Suspended Account
Quote:
Originally Posted by Widelec
Good night Quad-Addict
I'm going to sleep. Too late here...
g nite buddy
Dec 10, 2011, 07:53 AM
Simple is the best
HexaStar plan revized yesterday. All kits cut with new plan
Now motor 2 motor 262mm (~10inch)
abated a little bit more

.
Dec 11, 2011, 10:35 AM
Simple is the best
I add mail tracking link first post for PTT

PTT INTERNATIONAL REGISTERED MAIL TRACKING Link


Laser cut ready but I'm waiting screw and hex spacer.
It takes 1-2 week.
Dec 11, 2011, 10:50 AM
Mmmmmmm!
WiseDuck's Avatar
I just noticed something here. The top plate which is supposed to protect the electronics isn't big enough to protect larger boards such as the Crius and KK ones. (45mm between mounting holes) So my board will be unprotected. Also, the bottom board that the motors are mounted on don't have the same set of extra holes as the top plate (Those meant for KK boards and similar) so you have to use the nylon spacers like so:

Perhaps something to think about for the next revision. Still, I like the frame! The rest of the parts should be here tomorrow, then I can finally test it.

Dec 11, 2011, 11:14 AM
Simple is the best
Quote:
Originally Posted by WiseDuck
I just noticed something here. The top plate which is supposed to protect the electronics isn't big enough to protect larger boards such as the Crius and KK ones. (45mm between mounting holes) So my board will be unprotected. Also, the bottom board that the motors are mounted on don't have the same set of extra holes as the top plate (Those meant for KK boards and similar) so you have to use the nylon spacers like so:

Perhaps something to think about for the next revision. Still, I like the frame! The rest of the parts should be here tomorrow, then I can finally test it.
WiseDuck you're right
Protector Top plate orginally for 30.5mm board hole.
But many of 30.5mm board out off stock.
I add 45mm hole on Upper plate after the first relase.
Pre drilled for who want use other big board.

(You can clean nylon with wood stick on the bambucopter writing)
Dec 12, 2011, 06:22 AM
Quad Erat Demonstrandum
scousethief's Avatar
Exactly 7 days to arrive from Turkey

Excellent service
Excellent Quad frame

If only you sold motors and escs
Dec 12, 2011, 11:01 AM
Registered User
Ordered 2 set on Dec 6, but yet to see my parcel arrive Singapore .

Regards,
Edwin.K
Dec 12, 2011, 11:10 AM
QuaDreko pilot :)
Drekavac's Avatar
I also receive BambooCopter Mini today.

Thanks Widelec!
Dec 12, 2011, 01:04 PM
Aerial Images of Texas
tashley's Avatar
Quote:
Originally Posted by Widelec
I have one MiniWii board for mini frame but I will try different board.

Does that board have self leveling?
Dec 12, 2011, 01:05 PM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by tashley
Does that board have self leveling?
MiniWii board have self leveling capability.
You need to have an "Accelerometer" to have that on MultiWii board.
Dec 12, 2011, 02:10 PM
Flight Surgeon
FE Obsessed's Avatar
Widelec can you come to my rescue?

I (stupidly) tried to clean the glue residue from the tape you secured the top and bottom decks together with some acetone, the polycarbonate did not like that at all and clouded over and started cracking!

Might be worth switching to masking tape?

Any chance you can send me a spare top deck (and fixings set if you have one)

Now that I think of it a scaled up protective top plate to suit 45mm centres Crius multiwii / KKMulticopterboard would be grand too, I don't ask for much do I?

PM me please
Last edited by FE Obsessed; Dec 12, 2011 at 04:25 PM. Reason: Added Photo
Dec 12, 2011, 02:52 PM
Simple is the best
Quote:
Originally Posted by FE Obsessed
Widelec can you come to my rescue?

I (stupidly) tried to clean the glue residue from the tape you secured the top and bottom decks together with some acetone, the polycarbonate did not like that at all and clouded over and started cracking!

Any chance you can send me a spare top deck (and fixings set if you have one)

Now that I think of it a protective top plate to suit a 50mm (45mm centres) Crius multiwii board would be grand too, I don't ask for much do I

PM me please
PM send.

Acetone is a strong solvent..
But don't worry if necessary I can send to you spare parts.
Last edited by Widelec; Dec 12, 2011 at 03:07 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion BambuCopter *BlueBird QuadCopter, BlueBird TriCopter* SmallQuad 450 AirFrames Widelec Multirotor Drone Talk 343 May 25, 2013 03:00 PM
Discussion HK has a new mini quad frame Pintac Multirotor Drone Talk 20 Sep 28, 2011 10:04 AM
Sold Quad frame for sale!!! previously listed. as full quad. tc3wins Aircraft - Electric - Multirotor (FS/W) 3 Aug 25, 2011 08:56 AM
Sold Mini Quad with G10 frame RXR tc3wins Aircraft - Electric - Multirotor (FS/W) 4 Jul 21, 2011 11:05 PM