Thread Tools
This thread is privately moderated by Kambalunga, who may elect to delete unwanted replies.
Nov 11, 2011, 05:46 AM
Registered User
Kambalunga's Avatar
Thread OP

Mirage 2000

My new project
A Mirage 2000 C based on the FMT Mirage 2000 from M.J.Chyla.
The maiden fligth was 05.19.2012 but the Change Sun EDF 120mm 12blade faild after 20sec in air. I return the Mirage as glider to the landing strip. The good thing the fly and need no trimming. The damaged cover and the HET 700-98-670 is now repaired. The new EDF is a Dynamax with a HET 700-98-670, EJF CNC adapter and EJF collet. After some runs on the test stand on WOT made I the maiden flight with the Dynamax on 08.27.2012. 11S 30C max 95A. Change now to 12S/40C at start 103A.
Last edited by Kambalunga; Jul 17, 2018 at 12:23 AM.
Sign up now
to remove ads between posts

Quick Reply
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log mirage 2000 C (2000-5) wora Scratchbuilt EDFs 12 Feb 18, 2019 01:17 PM
Question Mirage 2000 70mm 335driver Electric Ducted Fan Jet Talk 3 Feb 29, 2012 03:45 AM
Discussion mirage 2000 tomme21 Foamy EDFs 0 Oct 21, 2011 11:18 PM
Mini-HowTo TOPGUN mirage 2000 transplant Extreme_RC Australia 0 Oct 10, 2011 04:18 PM