New HET all composite 90mm Super Sniper XL by - Page 70 - RC Groups
Thread Tools
May 24, 2012, 11:30 PM
efflux RC's Avatar
Nice flying guys!

Great video Vic.
Latest blog entry: Updated blog - Oct 2017
Sign up now
to remove ads between posts
May 24, 2012, 11:58 PM
jcdfrd's Avatar
now thats what Im talkin about, stab problem what stab problem

love the checkerboard on the bottom of the wings. both snipers look fantastic
May 25, 2012, 12:08 AM
deltas are cool
AIR SALLY's Avatar
brents was a bit hard to see when flying away from your self to love scale paint schemes...there fine when your young
May 25, 2012, 12:09 AM
Speed Demon
GregG's Avatar
Oh Yah, that was a good one! Makes me want one ....
May 25, 2012, 12:12 AM
Team EJF >>>WHOOSH>>>
AceMigKiller's Avatar
Thanks for all the compliments guys.
Makes making the video worthwhile lol

Next we get Steve (Stevenfox905's) Sniper airborne!
I think we might be experimenting with a new power system on his though... allow me to explain:

While at LA Jets, it was abundantly clear that between Brent's and my Sniper, we had two very different performing airplanes.

- Brent is using a Jetfan 90 on 8s 5000's producing about 2.5kw
- Mine is using a HET 9305V2 on 12s 4200's producing about 4.1kw

Needless to say, Brent's was much lighter than mine (by feel alone, I would guess at least 1.5 - 2lbs lighter).
The differences in the air were very clear, and I was shocked to see just how dynamic this airframe really is comparing the two literally side-by-side.

Brent's Sniper is much lighter, and will out-turn and manuever mine any day of the week.
It's *perfect* for Pilots that like to fly tight manuevers and very brisk, snappy aerobatics... not to mention Brent did a hell of a job demonstrating that this past weekend!

Mine is heavier, but has a ton more power. I have unlimited vertical right at takeoff, my acceleration was way faster, and obviously I was capable of hitting a much higher top speed.
The con was that I really had to plan ahead to keep up with Brent's turn and not get too deep into the coals or I'd fly right past him...

And knowing Steve, my flying buddy is going to want a setup more like Brent's --- Something that has decent top end (around 130mph), but can still whip around tighter than my current 12s Sniper safely can.
SO, we're gonna run some tests and post numbers on a HET 9305V2 Fan using:
- Hyperion 3026-1400kv on 8s
- Hyperion 3026-1900kv on 6s

Both setups should generate around 2.5kw, and should drive the weight down versus my setup. Again, he'll be able to have a more snappy, aerobatic *pattern* type jet, while mine is full-blown powerhouse, still very capable of impressive manuevers, but at a heavier wing loading.

I'll keep you guys posted

May 25, 2012, 12:19 AM
jcdfrd's Avatar
can you give us the auw's for brents and yours so we have a good guideline

May 25, 2012, 12:20 AM
deltas are cool
AIR SALLY's Avatar
Brent and i have about the same set up for 90mm jets ...we just think there more fun ....and easier to fly ,heck brent can fly just about anything,but i know he has more fun with the lighter wing loading ,and allows him to fly this at our home field ,only 425 long and @ 4500 asl. so yeah i think a "softer" set up would be nice. brents lands so sweet ,but yours was'nt too bad either ,lots of wing on this bad boy ,HET got the wing area right on this one .the retracts and struts are very nice too.
May 25, 2012, 12:21 AM
Team EJF >>>WHOOSH>>>
AceMigKiller's Avatar
Originally Posted by jcdfrd
can you give us the auw's for brents and yours so we have a good guideline

Mine is 9.7lbs.
I didn't get to weigh Brent's (we were at the field), but it felt at least 1.5 - 2lbs. lighter based on my *calibrated hand*

Maybe if we ask reaaal nice we can get CorsairNut to put his on a scale
May 25, 2012, 12:24 AM
Team EJF >>>WHOOSH>>>
AceMigKiller's Avatar
Originally Posted by AIR SALLY
brents lands so sweet ,but yours was'nt too bad either ,lots of wing on this bad boy ,HET got the wing area right on this one .the retracts and struts are very nice too.
That's the thing that amazes me... the Wing must be generating more lift at lower speeds (especially with flaps) than I originally figured.

By analyzing the videos, Brent and I both rotate about the same spot on the runway on both our flights (+/- 5ft.) and our touchdown speeds are similar as well. I would never know that mine weighs so much more just by looking at it until I see Brent's land and his struts are still stiff while mine are just about fully compressed!

All good stuff!
May 25, 2012, 12:28 AM
jcdfrd's Avatar
well that would put him at 8lbs on 8s.......... thats what the Bu32 weighs on 8s the sniper is almost twice the size. that certainly will make for some kickbutt lite wingloading
common Brent....pretty please can you put your sniper on the scale
May 25, 2012, 12:28 AM
deltas are cool
AIR SALLY's Avatar
you can see the lift when brent does a T&G the plane lifts up in the back ,kinda nose down like a B-52 ,and stay flat no pitch up from full power being applied and full flaps deployed ...i think even Al and myself could land this one
May 25, 2012, 12:30 AM
corsair nut's Avatar
last i checked it was right around 9 lbs

and that landing was one of my faster ones. a couple of times, i got it really slow and smooth
May 25, 2012, 12:35 AM
Registered User
Tamjets's Avatar
Originally Posted by AceMigKiller
Yeah thanks!
It's too bad our Elevators were fluttering the entire time... we probably could have pushed them a little harder... I shoulda listened to Tam.

Nice flyinig..
I guess built one for John just the way it is. Even I already point out there is defected parts.
If it survice no flutter. I personally come up said is alright appologized.
If it flutter...well...send the bill to EJF.

Making invoice for John every parts was in the airplane for record...LOL
May 25, 2012, 12:37 AM
jcdfrd's Avatar
cool so I have my goal now 10s at 9lbs and the best of both worlds
May 25, 2012, 12:43 AM
Team EJF >>>WHOOSH>>>
AceMigKiller's Avatar
Nobody is asking or expecting any sort of apology Tam.

I know you and your boys have the smarts and skills to build these right.
I'll tell you straight up, all you gotta do is locate where exactly the wood is on the Stab and slight shift your hinge line over to make sure your hinges are in the wood.

I did nothing special except for using upgraded Nylon Pinned Hinges from Dubro (#117) and making sure I epoxied the hell out of them.

Now go build and fly your friggin Sniper already okay?!?
They're alot of fun. I promise.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Cool New HET L-39 90mm by AceMigKiller Electric Ducted Fan Jet Talk 706 Mar 09, 2015 08:37 PM
Sold Crazy Price Drop!! HET Super Sniper with 70mm Mega/HET power system and servos. airmcn_3 Aircraft - Electric - Jets (FS/W) 9 Nov 14, 2011 12:37 PM
Found HET Sniper 90mm, airframe and maybe servos Knife Liddle Aircraft - Electric - Jets (FS/W) 2 Oct 01, 2011 12:10 PM
Sold NIB HET Super Sniper 90 V3 with HET 90mm fan and HET 600-37 motor mcgoughman Aircraft - Electric - Jets (FS/W) 0 Aug 30, 2011 09:35 PM
Sold HET All Composite Super Sniper priscalex Aircraft - Electric - Jets (FS/W) 0 Jun 30, 2008 10:17 PM