DJI Naza FC - First Page Has Links and Tips - Page 883 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Aug 29, 2012, 10:10 PM
Just a yard bird
kd4wen's Avatar
Quote:
Originally Posted by Adidas4275
you actually think the DJI motors are higher quality and better QC than SunnySky motors?




i forgot.... you own 1/2 the worlds supply of DJI motors
I was thinking the same thing but just biteing my lip. Daddy rich I guess really wounder about the internet anymore for sure lol.
Sign up now
to remove ads between posts
Aug 29, 2012, 10:11 PM
q {bld(); fly(); brk(); q();}
The Recursion's Avatar
When did this thread turn into 4chan?
Aug 29, 2012, 10:14 PM
Just a yard bird
kd4wen's Avatar
Quote:
Originally Posted by Tahoe Ed
I use these all the time. It really helps, especially with 6S lipos.
Good find Ed. Ordering some now. With the jig is up and these should make for some really pretty deans connections.
Aug 30, 2012, 02:06 AM
Registered User
Hello. Got my brand new NAZA+Gps, set all up. tried to fly, but it doesn't hold alt. it can fall from 20 m to the ground, or jump up. complete unpredictable. tried different props, different vertical gains.no effect. stabilisation is good. Setup : F550 frame, simonK rctimer30A,5000mah 60c, turnigy 2217-20T, 10x4,5 or 10x6 props.
I completely don't know what to do...
Today i'll try stock rc timer esc.and 2830-1000 motors
Aug 30, 2012, 03:30 AM
manual flying apologist
Adidas4275's Avatar
Quote:
Originally Posted by exploding fist
when did this thread turn into 4chan?
+1
Aug 30, 2012, 05:03 AM
Registered User
Quote:
Originally Posted by Adidas4275
still no news on the Naza firmware update that improves the gimbal controls?
It's out
http://www.dji-innovations.com/produ...tor/downloads/
Aug 30, 2012, 06:56 AM
Registered User
mauromassari's Avatar
Quote:
Originally Posted by goldsworthy
The way I do it is just buy a new battery each month and toss the old one in the trash .I am not that good with math so its easyer for me to handle the battery problems this way.
I would check your trash every day if I live by....

Mauro
Aug 30, 2012, 07:13 AM
Registered User
mauromassari's Avatar
Quote:
Originally Posted by RolandGarros
I don't like the XT cause you heat up the plastic during soldering.

With these you solder first, then add the plastic cover:

http://www.hobbyking.com/hobbyking/s...%5Fset%5F.html
A good way to not melt the plastic is just to plug the other side and then hold it with a small clamp and you be able to solder and not melt it, besides it will keep it aligned. It works every time for me. BTW you will nedd a good solder iron too.

Mauro
Aug 30, 2012, 07:32 AM
Suspended Account
Quote:
Originally Posted by mauromassari
I would check your trash every day if I live by....

Mauro
Sorry Mauro Jasper beat ya to it!
Aug 30, 2012, 07:56 AM
Registered User
u2builder's Avatar
Due to my 72 MHz issues I have ordered and Frsky receiver and TX module for my Futaba 7C. This has 7 channels plus a PPM output.

http://www.rangevideo.com/index.php?...roducts_id=226

I assume if I connect it up like my other reciever I just take the 6 outputs from Nasa and plug them into the RX like I did before.

What is PPM all about? Does it mean I use one wire out of the RX PPM port into the Naza? Does it connect to S-2 like the S-buss system?

Is there any advantage other than less wires?
Aug 30, 2012, 08:00 AM
Registered User
Quote:
Originally Posted by u2builder
What is PPM all about? Does it mean I use one wire out of the RX PPM port into the Naza? Does it connect to S-2 like the S-buss system?

Is there any advantage other than less wires?
One wire is better than 8. Not sure about other advantages but e.g. you can get 7-channel FrSky RX and when in PPM mode you can use 8 channels, I think.

I am going to play with it today when I get home. Really happy about the gimbal updates, can't wait to try it out!
Aug 30, 2012, 08:03 AM
Suspended Account
Deleted by Moderator
Last edited by goldsworthy; Aug 30, 2012 at 09:39 AM.
Aug 30, 2012, 08:06 AM
Registered User
mauromassari's Avatar
Quote:
Originally Posted by goldsworthy
Sorry Mauro Jasper beat ya to it!
That ok, anyway, I don't think it worth a trip from Brazil to USA.... But I am glad thad you got my name right.

Mauro
Aug 30, 2012, 08:15 AM
Suspended Account
Quote:
Originally Posted by mauromassari
That ok, anyway, I don't think it worth a trip from Brazil to USA.... But I am glad thad you got my name right.

Mauro
I just cut and pasted
Aug 30, 2012, 08:17 AM
Registered User
mauromassari's Avatar
Quote:
Originally Posted by alek3d
I alredy installed and I think the only thing that change is about gimbal control with frequency adjustments.

Mauro


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product DJI WooKong-M Autopilot System for multirotors **Owners Thread** DJI INNOVATIONS Multirotor Drone Electronics 20305 Nov 18, 2017 12:48 AM
New Product MultiWiiCopter "MiniWii" FC - Cheap, small 6DOF FC JussiH Multirotor Drone Talk 707 Jan 01, 2013 09:54 AM
Discussion DJI Innovation helicopter autopilot XP.3.1 for European customers JoelT Aerial Photography 2 Sep 24, 2009 12:43 PM
New Product United Hobbies FC 28-05 & FC 28-22 brushless outrunners $5.95 ea. JawaSnack Hot Online Deals 9 Jul 17, 2007 11:31 AM
Futaba FC-18 teacher to FC-16 pupil problem . jmquetin Radios 5 Nov 02, 2004 07:48 AM