DJI Naza FC - First Page Has Links and Tips - Page 1046 - RC Groups
Thread Tools
Nov 13, 2012, 01:38 PM
I never finish anyth
Quote:
Originally Posted by goldsworthy
I just PM'd you detailed instructions. Change your WINDOWS font size to something smaller. People often change that with the keyboard shortcut without knowing it and some programs do it for you. Details in the PM on how to change in Windows XP, let me know if you are on a different version and don't have access to Google.

EDIT** Ohh and you could also just reverse things on your TX... much easier and it will be less likely you will forget to make sure that box is always checked after firmware updates. Just a thought.
Sign up now
to remove ads between posts
Nov 13, 2012, 01:43 PM
Registered User
pajonate's Avatar
GW,
I think it is better to reverse the stick movement on your radio, if needed and do a re-calibration on the Assistant afterwards. That way all the sliders on the Assistant should be set to Normal, none reversed.
Maybe there is no difference in the behavior, but I am trusting my radio more than the assistant reversing.
Nov 13, 2012, 01:59 PM
Empire Support
T J Gilbert's Avatar

Thanks Guys...


I appreciate your helping GW.
I've been busy at work today, and he's wanting help getting back in the air...
Nov 13, 2012, 02:04 PM
I never finish anyth
My standard babysitting fee is $6/hr and if you want me to watch him for more than 3 hours you have to leave me money to order a pizza.
Nov 13, 2012, 02:17 PM
ehx
ehx
Registered User

Hexacopter vs. Quad Gains


In general you can expect a hexacopter to handle higher gains than a quad because of the two extra control points.

You do have to be careful in generalizing though. The motor, ESC, battery, prop, weight distribution, and frame arm length all play parts in the gain settings. You could easily create a quad that could handle higher gain settings than a hex, but if you kept everything the same except the number of arms the hex is expected to handle higher gains. This is mentioned briefly under "Tips" in the Naza manual.
Nov 13, 2012, 02:43 PM
KG7TTQ - Las Vegas
mark_q's Avatar
Quote:
Originally Posted by goldsworthy
I had the same issue GW, I had to go the DJI site, download the 1.8 Assistant software, install that, open the new Assistant, then it would automagically download and upgrade the firmware.

(remember - PROPS OFF or no power to the ESC's)

Good luck
Nov 13, 2012, 02:46 PM
Registered User
Quote:
Originally Posted by windfou
newbie question again for the naza , can i use a dx7 tx with this system because i want to purchase one maybe today thanks

if the answer is yes which mode i have to use to make it work ? tradition or ppm
Yes. Traditional mode
Nov 13, 2012, 02:50 PM
Suspended Account
Quote:
Originally Posted by c3d76
On DJI site,
Go to Products > Naza > Downloads > Assistant v 1.8 .exe

Once new assistant installed, go to "Tools"

Update firmware.

TAKE YOUR PROPS OFF BEFORE UPGRADING!
Thanks I did take the props off and upgraded the firmware. I am still having trouble setting up the NAZA but I will try more tomorrow.
Nov 13, 2012, 02:52 PM
Suspended Account
Quote:
Originally Posted by MCrites
My standard babysitting fee is $6/hr and if you want me to watch him for more than 3 hours you have to leave me money to order a pizza.
HEY! I deliver pizza here in Oro Valley. I get to see all the home bound fat ladies
Nov 13, 2012, 03:13 PM
Registered User
Quote:
Originally Posted by goldsworthy
HEY! I deliver pizza here in Oro Valley. I get to see all the home bound fat ladies
Thats put all sorts of scary images in my mind
Nov 13, 2012, 03:17 PM
Empire Support
T J Gilbert's Avatar

Proper Procedure


Quote:
Originally Posted by mark_q
I had the same issue GW, I had to go the DJI site, download the 1.8 Assistant software, install that, open the new Assistant, then it would automagically download and upgrade the firmware.

(remember - PROPS OFF or no power to the ESC's)

Good luck
They don't tell you to do what you suggest above.
But it probably goes without saying that you need the latest Assistant to download the latest firmware.
I think most of us just do it instinctively, and don't think about it being a requirement...

When DJI releases something new, I generally want to see what they've changed on the Assistant before I upgrade to a new firmware. So, I get the new Assistant first...
Nov 13, 2012, 03:26 PM
I never finish anyth
Quote:
Originally Posted by goldsworthy
Thanks I did take the props off and upgraded the firmware. I am still having trouble setting up the NAZA but I will try more tomorrow.
Please try the font size first. It should work.
Nov 13, 2012, 05:22 PM
Suspended Account
Italian Authority Awards First Commercial UAV Permit http://www.ainonline.com/aviation-ne...ial-uav-permit
Nov 13, 2012, 05:24 PM
Suspended Account
Quote:
Originally Posted by MCrites
Please try the font size first. It should work.
font size adjustment worked! I managed to calibrate the sticks but the second adjustment the settings for fail safe, manual flight ect. I did not fix. For some reason I am unable to make the adjustments. I will try again tomorow!
Nov 13, 2012, 05:28 PM
I never finish anyth
I'm a little bit of a genius, and i'm handsome. It should be illegal to be me.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product DJI WooKong-M Autopilot System for multirotors **Owners Thread** DJI INNOVATIONS Multirotor Drone Electronics 20305 Today 12:48 AM
New Product MultiWiiCopter "MiniWii" FC - Cheap, small 6DOF FC JussiH Multirotor Drone Talk 707 Jan 01, 2013 09:54 AM
Discussion DJI Innovation helicopter autopilot XP.3.1 for European customers JoelT Aerial Photography 2 Sep 24, 2009 12:43 PM
New Product United Hobbies FC 28-05 & FC 28-22 brushless outrunners $5.95 ea. JawaSnack Hot Online Deals 9 Jul 17, 2007 11:31 AM
Futaba FC-18 teacher to FC-16 pupil problem . jmquetin Radios 5 Nov 02, 2004 07:48 AM