Align TRex 450 Pro BNF now on eBay with starting bid of 99 cents… - RC Groups
Thread Tools
This thread is privately moderated by HeliPown, who may elect to delete unwanted replies.
Nov 06, 2011, 03:13 PM
Trader Rating: 2
Registered User

Align TRex 450 Pro BNF now on eBay with starting bid of 99 cents…

This should get exciting... I just posted my All Align, TRex 450 Pro ready to fly, on eBay with a starting bid of 99c just to make it fun..

You’ll get all the following, including free insured FedEx shipping with eMail tracking in continental United States. I meticulously built this TRex 450 Pro, using a combination of Align instructions and ‘Finless Bob’ videos, cleaning each screw and thread hole before Loctite applied. The 450 Pro flies great and does fast pirouettes, flips, rolls and is very smooth inverted thanks to KBDD paddles. Rotor has been both static and dynamically balanced and as you can see from the flying photo has perfect knife-edge blades.
Last edited by HeliPown; Nov 06, 2011 at 06:39 PM. Reason: Updated eBay link...
Sign up now
to remove ads between posts
Nov 06, 2011, 06:15 PM
Trader Rating: 14
Registered User
I take it the pro was sold through another venue?
Nov 06, 2011, 06:55 PM
Trader Rating: 51
A.K.A. Superjet112x
Assasin 1's Avatar

im bidding

cool I took a shot at it for $50.00
Nov 06, 2011, 07:18 PM
Trader Rating: 2
Registered User
pharanticness - I biffed the first eBay listing but putting in on a test account in error - the correct link is I posted in eBay since it was slow here at fixed price... Tried to change the old thread status and ended up locking it.
Nov 06, 2011, 08:57 PM
Trader Rating: 2
Registered User
Assain 1 is you're superjettdude on eBay it be there... See it's fun already
Nov 08, 2011, 03:35 PM
Trader Rating: 2
Registered User
eBay still be happening / hope someone here gets it...
Nov 12, 2011, 11:47 AM
Trader Rating: 2
Registered User
Just over a day left so I went through my part box to see what I could find to get to the new owner and revised my listing on eBay to reflect additional details below…


All Align, TRex 450 Pro, shipped fully assembled ready to fly out of the box. I will eMail both FedEx tracking plus photos of packing sequence. I spent lots of time getting all the mechanical setups perfect. It’s really hard to part with this 450 Pro after getting it totally dialed in but I just don’t have time to fly all he helicopters I have.

Electronics included...alone would cost over $400

1. Cyclic servo: Hitec HS-65MG Metal Gear Mighty Feather Servo @ $26ea (with share is over $100 in cyclic servos)

2. Tail servo: Digital Ultra High Speed JR 3500g @$70

3. Receiver: Spektrum AR6200 6 channel DSMX receiver with satellite @$79

4. Gyro: Curtis Youngblood MiniG Gyro with box and manual @ $130

5. New Align Motor @ $50

Also in the package you’ll get:

- New spare Hitec HS-65MG Metal Gear Mighty Feather Servo

- Two extra set of used Align Carbon Fiber blades in the box

- Two used 2200mah Lipo batteries

- Three spare flybar rods

- Three sets of extra flybar paddles

- Blade balancer

- Set of extra tail blades

An incredible Heli / hope one of my buds on bags it…

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Align TRex 450 Pro BNF with extra new HS-65MG cyclic servo $450 HeliPown Aircraft - Electric - Helis (FS/W) 8 Oct 30, 2011 11:01 PM
Discussion Help with ICE50 settings on 450MX on trex 450 pro... magbarn Castle Creations 1 Oct 04, 2011 02:47 PM
Sold Super Clean Align Trex 450 Pro v.3 RTF or BNF w/ tools, spares etc.. HeliFlyer711 Aircraft - Electric - Helis (FS/W) 3 Sep 04, 2011 06:44 PM
Off Site Century Swift and Mini Titan E325 on Ebay $99 each starting bid pach Aircraft - Electric - Helis (FS/W) 1 Oct 20, 2010 08:03 PM
ebay auction! 2 recievers and 8 servo's 49.99 starting bid! annihilator Aircraft - General - Radio Equipment (FS/W) 0 Sep 17, 2004 05:18 PM